Sigarms Mauser M2 Instructions Manual

06.01– US19 –Mauser M2Maintenance
7.3 Assembling the pistol
Procedure
1. Check that there is no foreign matter inside the pistol.
2.I n s e rt barrel 1 into the slide 4 with the control lug facing down.
3. Insert recoil spring unit 2 into the slide 4 and b a rrel lug When recoil spring unit 2is inserted into slide 4, it becomes
preloaded. If the recoil spring unit 2is not carefully installed
in slide 4, it can fly out and injure you or someone in your
vicinity.
4. Turn control lever 42 into its...

06.01– US20 – Mauser M2Maintenance
7. Hold the grip frame 19 with the right hand, pull back the
slide 4 to its rear position with the left hand. Press slide
catch lever 26 up and in till it “clicks” into place (Fig. 15).
8. Follow the slide 4forwards with the hand.
9. Pull back trigger 21 so that the pistol is in its fully
decocked position.
10. Pistol set on safe (external safety models only).The pistol is unloaded, decocked and set on safe.7.4 Verification of functionsVerification of functions must be...

06.01– US21 –Mauser M2Maintenance
3. Check manual safety and trigger (external safety models).
– Insert empty magazine.
– Move safety lock 37to position S. Pull trigger 21fully.
– Check whether trigger 21is locked.
– Move safety lock 37to position F and pull trigger 21fully.
– Check whether firing pin 9is cocked and trips audibly
after about .6” trigger movement.
4. Check trigger interruption.
– Remove magazine.
– With trigger 21 pulled fully back, pull back slide 4to stop
and release. Do not release...

06.01– US22 – Mauser M2MaintenanceService and Repairs
7.5 Care of the pistolAlways keep your pistol in immaculate condition and in
good working order.Always clean your pistol after use.Never modify or repair parts of your pistol yourself.Have your pistol checked once every 12 months by a
qualified gunsmith or armorer because defects, wear,
corrosion, etc. are not always visible from the outside.For repairs or service work, however, we recommend that
you return your pistol to the manufacturer who always...

06.01– US23 –Mauser M2Service and RepairsAssembly/Malfunction
Ammunition feed: 
No round chambered.
Slide:
Slide does not close properly.
Case ejection:
Spent case sticks in chamber or jams
in ejection port.
Misfire: 
The trigger 21was pulled, 
no discharge.Potential Cause
Magazine not properly inserted,
deformed or dirty.
Pistol or rounds dirty or too
heavily greased.
Pistol defective.
Recoil insufficient because 
of fouling.
Underloaded ammunition.
Pistol defective.
Firing pin sticking in its guide....

06.01– US24 – Mauser M2 8.2 Safekeeping and storage of the pistolAlways store your pistol unloaded and in cleaned
condition.Store your pistol separate from its ammunition and 
under lock and key. The pistol and ammunition must not 
be accessible to children and other inexperienced or 
unauthorized persons.
8.3 Shipping the pistolFamiliarize yourself fully with Federal, State & local laws
governing the shipping and transportation of firearms.
When you return a pistol to the SIGARMS Inc. Service...

06.01– US25 –Mauser M2Disposal
9 Disposal
– Strictly observe any current Federal, State & local legislation
governing the disposal of handguns.
– Provided this is not contrary to the abovel legislation, we
recommend shipping the pistol to the address listed under
Sect. 8.3 for disposal.
– When shipping the pistol, strictly observe the instructions
listed under Sect. 8.3.Mauser M2 OM.qxd  6/5/01  12:28 PM  Page US25 

06.01– US26 – Mauser M2Technical Specifications / Types / Accessories Technical SpecificationsCaliber.45 ACP.40 S&W 
Length, overall6.85”6.85”Height, overall5.04”5.04”
Width, overall1.34”1.34”Barrel length3.54”3.54”
Rifling lead1 in 16”1 in 15” No. of grooves66
Sight base5.7”5.7”Weight, excl. magazine28.9 oz29.3 oz
Magazine weight, empty3.4 oz3.4 ozTrigger pull DAO8.8 lbs8.8 lbsMagazine capacity/Rounds 810Accessories
– Spare magazines 
– Cleaning kit
– Front sight
– Rear & Front Sight Adjustment Tool...

06.01– US27 –Mauser M2Spare Parts List 
Item Designation
19  Frame
20  Locking insert
21 Trigger
22 Trigger spring
23 Trigger bar
24 Trigger bolt
25 Locking insert bolt
26  Slide catch lever
27 Rear insert
28 Ejector
29 Ejector bolt
30 Safety lever spring
31  Safety lever
32 Safety lever bolt
33 Catch
34 Long spring bolt
35 Catch reset spring
36 Short spring bolt
37 Safety lock
38 Stop ball
39 Stop ball springItem Designation
40 Safety lock bolt
41 Rear insert bolt
42 Control lever
43  Magazine catch 
44...

06.01– US28 – Mauser M2Spare Parts ListMauser M2 OM.qxd  6/5/01  12:28 PM  Page US28