Siemens Sx 66t096 Operating Instructions
Here you can view all the pages of manual Siemens Sx 66t096 Operating Instructions. The Siemens manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 11
Rinse aiden 11 , Rinse aidRinse aid As soon as the rinse-aid refill indicator P is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes. Refill with rinse aid. The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Combined detergents with rinse-aid component may be used up to a water hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l) only. If the water hardness is over 21° dH, rinse aid must be...
Page 12
enUtensils 12 Switching off rinse aid refill indicator If the rinse-aid refill indicator P is impaired (e.g. when using combined detergents containing rinse aid component), it can be switched off.
Page 13
Utensilsen 13 Unloading the dishwasher To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up. Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled. Note When the programme ends, water droplets can still be seen inside the appliance. This does not affect the drying of the utensils. Cups and...
Page 14
enUtensils 14 Cutlery drawer Arrange the cutlery in the cutlery drawer 1* as illustrated. Separately arranged utensils are easier to remove after washing. The drawer can be taken out. Depending on the model, you can fold down the side shelves to provide more room for taller items of cutlery. The front rows of prongs can be folded down to provide room for wider handles. Fo ld in g spikesFolding spikes * * depending on model The spikes can be folded down to improve arrangement of pans,...
Page 15
Detergenten 15 Appliance height 81.5 cm Appliance height 86.5 cm 1. Pull out the top basket 12 out. 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping. 3. Toraise the basket, hold the basket on the sides of the upper edge and lift it up. 4. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise,...
Page 16
enDetergent 16 Adding detergent 1. If the detergent dispenser 92 is still closed, press the lock 9: to open the detergent dispenser. Pour detergent into the dry detergent dispenser 92 only (insert tablet flat, not on its edge). Dosage: see manufacturer’s instructions on the packaging. The graduated detergent dispenser 92 helps you add the correct amount of powder or liquid detergent. Usually 20 ml–25 ml are adequate for normal soiling. If using tablets, one tablet is adequate. 2....
Page 18
enOverview of programmes 18 / Overview of programmesOverviewofprogrammes The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Type of utensils Type of soiling Programme Possible additional optionsProgramme sequence pots and pans, non-sensitive utensils and cutlery very adhesive...
Page 19
Additional optionsen 19 Information for test institutes Test institutes receive the information for comparability tests (e.g. according to EN60436). These are the conditions for conducting the tests, however these are not the results or consumption values. Request by e-mail to: [email protected] The product number (E no.) and the production number (FD) are required which you can find on the rating plate 9B on the appliance door. 0 Additional optionsAdditional options *...
Page 20
enOperating the appliance 20 1 Operating the appliance Operating theappliance Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹… . Different influencing factors such as e.g. water temperature or line pressure may result in deviations. Aq u a s ens orAqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the...