Siemens Sn 25e270 Operating Instructions

en
21
... during the wash cycle
Unusual foam formation. 
– Handwash liquid in the rinse aid dispenser. 
Spilled rinse aid causes excessive  
frothing, therefore please remove with 
a cloth.
Appliance stops during the wash cycle. 
– Power supply interrupted. 
– Water supply interrupted. 
Filling valves making striking noises 
– Caused by the installation of the water  line and has no effect on the function  
of the machine. Remedial action is not 
possible.
Knocking/rattling noise during rinsing 
– Spray...

en
22
If the advice given does not resolve your  
problem, please contact your customer 
service. Contact details can be found on  
the back cover of this instruction manual  
or in the enclosed customer service list. 
When calling , please quote the appliance 
number (1) and the production date  
(FD = 2) which can be found on the rating  
plate 
9* on the appliance door.
Rely on the expertise of the  
manufacturer.   Call us to ensure that the 
repair will be carried out  by fully-trained  
service...

en
23
– After installing the appliance, ensure 
that the plug is easily accessible. 
(see Electrical connection)
–Some models: The plastic housing on the water  
connection contains an electric valve, 
the connecting cables are in the supply 
hose. Do not cut through this hose, 
do not immerse the plastic 
housing in water.
ã=Warning
If the appliance is not in a cavity and a  
side panel is accessible, the door hinge 
area must be covered at the side  
for reasons of safety (risk of injury).  
The covers...

en
24
Warm water connec
tio
nWarm water connection
* depending on model 
The dishwasher can be connected to cold  
or hot water up to max. 60 °C.  
Connection to hot water is recommended  
if the hot water can be supplied 
by energetically favourable means  
and from a suitable installation, e. g. solar  
heating system with circulation line. 
This will save energy and time. 
The hot water setting ‘:‹‚  allows you 
to adjust your appliance optimally  
to operation with hot water. 
It is recommended to...

en
25
Transportation
Empty the dishwasher and secure loose  
parts. 
Drain the appliance according to the  
following steps: 
– Turn on the tap. 
– Close the door. 
–Switch on ON/OFF switch ( .
– Select programme with the highest  temperature.
The expected programme duration is  
indicated on the numerical display 
H . 
– Press START button  @.
Programme sequence starts.
– After approx. 4 minutes press the  START button @ until  ‹:‹‚  is 
indicated on the digital display.   
After approx. 1 min is...

      

   



DownloadedfromDishWasherManualcomManuals  

 
 

 
 


 

 
 
 
 
 



 
 
 






 
 
 


 

 


*9000574564* 
9000574564
 en (9111) 640EG