Siemens Fi 24dp31 Operating Instructions

							21
Water runs from  
the appliance.
The water connection hose is not properly 
sealed. Replace the hose with a manufacturer’s original 
part.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure  and damage to the appliance.
The water pressure 
is less than usual. Low water pressure. The water pressure must be between 1.72 bar 
and 8.25 bar so that the appliance works  
properly.
Shut off tap incorrectly opened. Open shut off tap fully and check for leaks.  Check the minimum through flow.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure  and damage to the appliance.
Water supply has kinks. Turn off the water supply at the shut-off tap.  Smoothen out the kinks, exchange where  
necessary.
The water filter is bunged up or used. Change the water filter.
The discharged 
water is not cold. The appliance is newly set up. The water in the tank needs approx.12 hours 
to cool down.
The water in the tank is exposed. 
The water has stood for a long period in the  
pipes outside of the tank and has adapted to the  
room temperature. Throw the first glass of water away.
The water appears 
cloudy. There is air or air bubbles in the water. This is normal when using the dispenser for 
the first time. It disappears after a short time.
Particles float in the  
water or ice cubes. The first water which runs through the filter can 
rinse carbon dust out of the filter. The particles are not harmful! These particles 
disappear after a short period.
If water freezes and thaws again, particles are  
formed by mineral deposits. The particles are not harmful! In the water supply 
this is a natural occurrence.
 
						

							22
Change the light  
bulbs Warning
 
  Risk of electric shock!
 Caution

 
 
Halogen lamps in the  
freezer space 
Halogen lamp type: 
12 V/20 W/bulbholder G4  Free the cover and remove.
 Remove the defective halogen  
bulb.
 Insert the new halogen bulb. 
Always use a soft cloth when 
inserting a halogen bulb. 
Replace the cover and press it until 
it engages.
Halogen bulbs on the ice  
and water dispenser 
Halogen lamp type: 
12 V/5 W/bulbholder G4  Remove the defective halogen  
bulb.
 Insert the new halogen bulb. 
Always use a soft cloth when 
inserting a halogen bulb.Customer service 
Check whether you can remedy the fault  
yourself on the basis of information 
provided in the “Eliminating minor faults  
yourself” section. Your local customer  
service can be found in the telephone 
directory or in the customer-service 
index. 
Please provide customer service with  
the appliance product number (E-Nr.)  
and production number (FD). 
To prevent unnecessary call-outs,  
please assist customer service by 
quoting the product and production 
numbers. This will save you additional 
costs. 
This information can be found on the  
product label.
      
						

							23
 
						

							9000 265 259en (8705)
Siemens Elektrogeräte GmbH 
Carl-Wery-Straße 34
81739 München 
www.siemens-hausgeraete.de
Subject to alterations.