Shredder Stiga RECYCLING BIO-SILENT 8217 3044 01 Instructions Manual

STIGA 
RECYCLING
BIO-SILENT
8217-3044-01 

Läs noga
samtliga
instruktio-
ner.Varning! Håll
åskådare
borta. Se upp
med utkas-
tade föremål.Varning! För
ej in hand
eller fot
underkåpan
då maskinen
är igång.Varning! -
roterande
knivar.Drag ur stick-
kontakten
innan någon
typ av under-
håll utförs.Knivarna
fortsätter att
rotera efter
det att
maskinen
stängts av.Använd
skyddshand-
skar, skydds-
glasögon och
hörselskydd.
Lue käyttö-
ohje huolelli-
sesti.Va r o i t u s ! P i d ä
sivulliset kau-
kana. Varo
sinkoutuvia
esineitä.Va r o i t u s ! Ä l ä...

Read these
instructions
for use care-
fully.Warning!
Keep specta-
tors away.
Beware of
objects being
flung out.Warning! Do
not put hands
or feet under
the cover of
the machine
when it is run-
ning.Warning -
rotating
blades!Remove the
plug from the
wall socket
before carry-
ing out any
kind of main-
tenance.The blades
will con-
tinue to
rotate after
the machine
has been
switched off.Wear safety
gloves, safety
goggles and
hearing pro-
tection.
Leer atenta-
mente las
instruccio-
nes de uso.¡Advertencia!...

5
SVENSKAS
4.
2.
1.
3.
4. 

6
SVENSKA S
6.
5.
7.8. 

7
SVENSKAS 

8
ENGLISHGB
SAFETY INSTRUCTIONS
This symbol indicates WARNING.
Personal injury and/or damage to property
may result if the instructions are not
followed carefully.
GENERAL
 Study the warning stickers on the machine.
Replace damaged or illegible warning stickers.
 Please read through these instructions carefully.
Learn all the controls and the correct use of the
machine.
 Never use the machine if others, particularly
children or pets, are in the vicinity. Never let
children or anyone who is not...

9
ENGLISHGB
2. Position the legs according to fig. 2.
3. Secure the legs on the machine with washers
and screws (fig. 3). Tighten properly.
4. Thread the wheel axle through the holes in the
legs and through the tube (fig. 4).
5. Install the wheels on the wheel axle with
washers and nuts (fig. 5). Do not tighten the
nuts yet.
6. Turn the grinder and place it on a flat surface.
7. Tighten the wheels by putting your weight
against the opposite wheel (fig. 6). Screw each
wheel approximately the same amount....

10
ENGLISHGB
AUTOMATIC CHANGE IN
DIRECTION OF ROTATION
In the event of a sudden blockage, the machine can
automatically change the direction of rotation.
This causes the material to be fed back.
 switch off the machine.
 wait until the spiral cutter has stopped
 start the machine again and use material which
can be processed more easily.
STOPPING THE MOTOR
Stop the motor by turning the switch to
position0(fig. 8).
Do not feed in any material after the
motor has been stopped. This will get
caught in...

11
ENGLISHGB
Switch on device (switch in right position)
Turn adjusting screw in a clockwise direction with
the motor running until scraping noises are heard
and fine aluminium chips fall out of the delivery
chute. Worn points on the shaving plate are opti-
mally compensated.
This improves the cutting of the shredding
material.
MAINTENANCE
Always disconnect the plug from the
electric socket before any maintenance.
Always wear protective gloves to avoid
injury.
Generally speaking, compost grinders require...