Sharp Xv Z90u Projector User Manual

OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV-
Z90U
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A286WJZZ
XV-Z90UENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
XVZ90U(E)#Hyo1+4.p6520/8/02, 7:17 pm 1 

E-1
Important
Information
IMPORTANT
For your assistance in reporting the loss or theft of your
Projector, please record the Serial Number located on
the bottom of the projector and retain this information.
Before recycling the packaging, please be sure that
you have checked the contents of the carton thoroughly
against the list of “Supplied Accessories” on page 11.
Before using the projector, please read this operation manual carefully.
OPERATION MANUALENGLISH
Model No.: XV-
Z90U
Serial No.:
There are...

E-2
Important
Information
LAMP REPLACEMENT 
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW  1 HOUR TO COOL BEFORE
REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XVZ90+++1 ONLY. UV RADIATION : CAN CAUSE
EYE DAMAGE. TURN OFF LAMP  BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD  OF GLASS  PARTICLES IF LAMP HAS
RUPTURED. HANDLE WITH  CARE. SEE  OPERATION MANUAL.DU REMPLACEMENT DE LA LAMPE. PRECAUTIONS A OBSERVER LORSDEBRANCHER LE...

E-3
Important
Information
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your
personal safety. However IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order
not to defeat the safeguards incorporated into this Projector, observe the following basic rules for its installation, use and
servicing. For your own protection and reliable usage of your Projector, please be sure to read these “IMPORTANT...

E-4
Important
InformationIMPORTANT SAFEGUARDS
95˚F
(+
35˚C)
41˚F
(+
5˚C)
CAUTION
PRECAUCIÓN
PRÉCAUTION
BQC-XVZ90+++1
Caution Concerning the Lamp Unit
There is a potential hazard of glass particles if the lamp ruptures. In case of
lamp rupture, contact your nearest Authorized SharpVision Service Center
or Dealer for a replacement.
See “Replacing the Lamp” on page 46.
Cautions Concerning the Setup of the Projector
For minimal servicing and to maintain high image quality, SHARP recommends
that this...

E-5
Important
Information
IMPORTANT SAFEGUARDS
Temperature Monitor Function
If the projector starts to overheat due to setup problems “TEMP” and “” will
blink in the lower-left corner of the picture. If the temperature continues to
rise, the lamp will turn off, the TEMPERATURE WARNING indicator on the
projector will blink, and after a 90-second cooling-off period the power will
shut off. Refer to “Lamp/Maintenance Indicators” on page 44 for details.
•The cooling fan regulates the internal temperature,...

E-6
Important
InformationContents
Important Information
IMPORTANT SAFEGUARDS ................... 3
Contents ................................................... 6
Outstanding Features ............................. 7
Part Names .............................................. 8
Supplied Accessories ............................. 11
Connections ............................................ 12
Power Supply ............................................ 12
Connecting to Video Equipment ............... 12
Connecting...

E-7
Important
Information
Outstanding Features
1. DMD™* (Digital Micromirror Device) Chip
The DMD Chip allows for a higher contrast image. It enables smoother expression of details of an image,
and high picture quality for an exciting theater experience.
* Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
2. Five Speed Primary Color Wheel
The color wheel consists of only the three primary colors of the light and creates a higher contrast image
with...

E-8
Important
InformationPart Names
Projector
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Front and Top View
16
5
5
POWER indicator
4Exhaust ventilative hole LAMP 
REPLACEMENT indicator TEMPERATURE 
WARNING indicator
19ADJUSTMENT buttons
(∂/ƒ/ß/©) 
26UNDO button
26MENU button
24RESIZE button
24INPUT button
17Swivel Stand 
LOCK/UNLOCK lever
15Remote control sensor
9Lens cap
Zoom knob16
Exhaust ventilative hole4
Focus ring16
18Lens shift dial
19ENTER...

E-9
Important
Information
Part Names
Projector
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Side and Rear View
13
1314
49Intake ventilative hole
AC socketIntake ventilative hole
49
13INPUT 2 DVI digital port
INPUT 1 COMPONENT
terminals (RCA)
INPUT 4 VIDEO terminal (RCA) DIGITAL INPUT 
TYPE switch13INPUT 3 S-VIDEO terminal
(4-pin Mini DIN)14RS-232C port 
(9-pin D-sub)
15Remote control sensor
12
Attaching the Lens Cap
After putting the lens cap strap...