Sharp Xv Z9000u Projector User Manual

E-31
Basic Operation
Selecting the Signal Type
This function allows you to select the input signal type
COMPONENT or RGB for INPUT 1 or 2.
1Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2Press 
/ to select “Signal Type”, and then
press
.
3Press 
/ to select “RGB” or “Component”.
4Press ENTER to save the setting.
5To exit the GUI, press MENU.
Adjusting the Picture
(GUI) On-screen Display
(GUI) On-screen Display
Progressive Mode
This function allows you to...

E-32
Basic Operation
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the DMD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
• Computer image adjustments can be made easily by pressing
AUTO SYNC () on the remote control. See page 35 for details.
(Select the desired computer input mode...

E-33
Basic Operation
Adjusting the Computer Images (RGB menu only)
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect a computer to the projector.
Saving the adjustment setting
1Press MENU.
2Press 
/ to select “Fine Sync”.
3Press 
/ to select “Save Setting”, and then
press 
.
4Press 
/ to select the desired memor y location
of the...

E-34
Basic Operation
Adjusting the Computer Images (RGB menu only)
Special Mode Adjustment
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.
1Press MENU.
2Press 
/ to select “Fine Sync”.
3Press 
/ to select “Special Modes”, and then
press 
.
4Press 
/ to select the optimal resolution....

E-35
Basic Operation
Adjusting the Computer Images (RGB menu only)
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by
pressing the AUTO SYNC button on the remote
control, or automatically by setting “Auto Sync” to
“Normal” or “High Speed” in the projector’s GUI menu.
OFF
•Synchronized adjustment is not automatically
performed.
•Press AUTO SYNC to perform manual adjustment.
Normal
•Synchronized adjustment is automatically performed
the same...

E-36
Basic OperationReducing Image Noise (VIDEO menu only)
Auto Sync Display Function
Normally, an image is not superimposed during Auto
Sync adjustment. You can, however, choose to
superimpose a background image during Auto Sync
adjustment.
1Press MENU.
2Press 
/  to select “Fine Sync”.
3Press  
/  to select “Auto Sync Disp”.
4Press 
/ to select “” to superimpose a
background image or “
” to remove the
background image during Auto Sync adjustment.
5To exit the GUI, press MENU.
2,3,4
1,5
(GUI) On-screen...

E-37
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
1Press MENU.
2Press 
/ to select “Options”.
3Press 
/ to select “OSD Display”, and then
press 
.
4Press 
/ to select the desired On-screen
Display.
5Press ENTER to save the setting.
6To exit the GUI, press MENU.
(GUI) On-screen Display
Setting the Video Signal (VIDEO menu only)
The video input system mode is preset to “Auto”;
however, it can be...

E-38
Basic Operation
Selected item
Theater Mode Functions
Function as a toggle switch for controlling the quantity
of projected light. Select “NORMAL” or “BRIGHT” to
decrease or increase brightness, power consumption
and fan noise.
This function can be operated using the THEATER
MODE button on the remote control, as well as the GUI
menu screen.
Description of Theater Modes
Operating the Theater Mode Function with
the Remote Control
1Press THEATER MODE on the remote control.
The present Theater Mode is...

E-39
Basic Operation
Selecting a Background Image
(GUI) On-screen DisplayThis function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
1Press MENU.
2Press 
/ to select “Options”.
3Press 
/ to select “Background”, and then
press 
.
4Press 
/ to select the background image you
want to display on the screen.
5Press ENTER to save the setting.
6To exit the GUI, press MENU.
Selected item
Blue
NoneDescription
Blue screen
Black screen
1,6...

E-40
Basic Operation
With this function, you can adjust the vertical size of
the display to allow for subtitles.
Description of Subtitle Setting
1Press MENU.
2Press 
/ to select “Options”.
3Press 
/ to select “Subtitle”.
4Press 
/ to move the  mark of the subtitle
setting.
5To exit the GUI, press MENU.
•The RESIZE modes that are available for the Subtitle setting
are SMART STRETCH and CINEMA ZOOM only. Please refer
to the page 24 for details.
•The value of the Subtitle setting may be changed using the...