Sharp Xv Z7000u Projector User Manual

E-1
Important
InformationIMPORTANT
For your assistance in reporting the loss or theft of your
Color LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of “Supplied Accessories”
on page 10.
Before using the LCD projector, please read this operation manual carefully.
OPERATION MANUALENGLISH
Model No.: XV-
Z7000U
Serial...

E-2
Important
Information
ENGLISH
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the ON/OFF button on the projector or the POWER
button on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP...

E-3
Important
Information
Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your
personal safety. However IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order
not to defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and
servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “IMPORTANT
SAFEGUARDS”...

E-4
Important
Information
Outstanding Features
1. FOR USE WITH DTV
Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems.
(Page 11)
2. ADVANCED VIDEO  CIRCUITRY
Provides high quality images with minimal dot crawl and cross color noise.
3. 3D DIGITAL UNIFORMITY
Equipped with new 3D digital uniformity technology for a clearer, more uniform image.
4. ACTIVE DIGITAL KEYSTONE CORRECTION
Corrects keystone distortion caused when the projected image...

E-5
Important
Information
Important Information
Contents
IMPORTANT SAFEGUARDS …………………… 3
Outstanding Features …………………………… 4
For SHARP Assistance (U.S.A. only) ………… 4
Contents …………………………………………… 5
Usage Guidelines ………………………………… 6
Part Names ………………………………………… 7
Air Filter Maintenance …………………………… 35
Lamp/Maintenance Indicators ………………… 37
Replacing the Projection Lamp ………………… 38
Using the Kensington Lock …………………… 40
Troubleshooting …………………………………… 40
Appendix
Maintenance & Troubleshooting
Useful Features
Freeze...

E-6
Important
Information
Usage Guidelines
95˚F
(35˚C)
41˚F
(5˚C)
Temperature Monitor Function
If the projector starts to overheat due to setup problems or a dirty air filter, “TEMP.”
will appear in the lower-left corner of the picture. If the temperature continues to
rise, the lamp will turn off, the TEMPERATURE WARNING indicator on the projector
will flash, and after a 90-second cooling-off period the power will shut off. Refer
to “Lamp/Maintenance Indicators” on page 37, for details.
•The cooling...

E-7
Important
Information
Part Names
PICT MODE/ENTER button
Projector
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Front and Top View
ON/OFF
POWERLAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENUPICT MODE
16
20
31
20
19
20
15
15
20
37
37
6
18
15
15
9
41
35
Cooling fan (Exhaust vent)ON/OFF button
POWER indicator
INPUT/BACK button
KEYSTONE/Adjustment
(∂/ƒ) buttons
ZOOM knob
FOCUS ringLAMP REPLACEMENT
indicator
TEMPERATURE WARNING
indicator
Remote control...

E-8
Important
Information
Front View
Part Names
Top View
Remote Control
VOL
POWER
MUTE
BACK
MENU
ENTER
RGB/
COMPONENT
INPUT 1PICT MODE
AUTO SYNC INPUT 2 GAMMA
KEYSTONEVIDEO FREEZE S-VIDEO CLR TEMP
16
16
12
20
16
16
16
16
19
15
20
20
20
26
31
30
29
28KEYSTONE buttonsPOWER button
BACK button
MENU button
AUTO SYNC button
GAMMA button
FREEZE button VOLUME buttons
MUTE button
Mouse (∂/ƒ)/
Adjustment (∂/ƒ)
buttons
INPUT 1 button
INPUT 2 button
S-VIDEO button
VIDEO buttonENTER button RGB/COMPONENT
button
PICT...

E-9
Important
Information
Part Names
Positioning the Remote Control
The remote control can be used to control the projector within the ranges shown below.
•The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Attaching the Rubber Leg Tips
The rubber leg tips are provided to prevent the remote
control from skidding and shaking over a flat surface.
30˚45˚
23 (7 m)
30˚
45˚
30˚
Remote...

E-10
Setup & Connections
Setup & Connections
Supplied Accessories
Rubber leg tips
for remote control
GLEGG9095CEZZ
Remote control
RRMCG1636CESA
Two AAA size batteries
LCD projector operation manual
TINS-7273CEZZ Lens cap
PCOVZ1095CEKA Extra air filter
PFILD0123CEZZLens cap strap
UBNDT0013CEZZ
Power cord
CACCU5013DE01DIN-D-sub RS-232C cable
QCNW-5288CEZZ