Sharp Xv Z10000u Projector User Manual

							Appendix
-89
Glossary
Advanced intelligent compression
High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.
Aspect Ratio
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background
Initial setting image projected when no signal is
being output.
Clock
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)
Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.
C.M.S.  (Color Management System)
Function allows you individually adjust the display
characteristics of six colors (R: Red, Y: Yellow, G:
Green, C: Cyan, B: Blue, M: Magenta)
Digital Shift Setting
The image can be moved vertically when the im-
age display mode is set to SMART STRETCH or
CINEMA ZOOM during input of video or DTV sig-
nals.
Dot by dot
Mode that projects images in their native resolution.
Gamma
Image quality enhancement function that offers a
richer image by brightening the darker portions
of the image without altering the brightness of the
brighter portions.
HDCP
Display digital interface that also supports Ana-
log interfaces.
Keystone correction
Function to digitally correct a distorted image
when the projector is set up at an angle, smooth-
ens out jaggies on keystone images and com-
presses the image not only horizontally but verti-
cally keeping the 4:3 aspect ratio.
Phase
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.
Progressive Mode
The progressive display projects a smoother video
image. You can select three different modes: 2D
Progressive, 3D Progressive and Film Mode.
Resize
Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select six different modes: SIDE BAR, SMART
STRETCH, CINEMA ZOOM, STRETCH, DOT BY
DOT or NORMAL.
Smart Stretch
Mode that stretches the right and left sides of the
4:3 image horizontally while maintaining the as-
pect ratio around the center of the image to dis-
play it on the WIDE screen.
Stretch
Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen. 
						

							-90
2D Progressive .................................................... 46
3D Progressive .................................................... 46
AC socket ............................................................ 16
Adjusting Computer Images ................................ 53
Adjusting the Lens ............................................... 26
Adjusting the Picture ............................................ 44
Adjustment buttons .............................................. 32
Adjustment feet .................................................... 25
Aspect ratio .......................................................... 59
Auto Power Off .................................................... 68
Auto Sync Adjustment ......................................... 55
AUTO SYNC button ............................................. 55
Auto Sync Disp .................................................... 56
Background .......................................................... 66
Batteries ............................................................... 13
Ceiling-mount setup ............................................. 30
CD-ROM ................................................................ 9
Chroma ................................................................ 51
CINEMA ZOOM ................................................... 59
Clock .................................................................... 53
CLR Temp (Color Temperature) .......................... 44
C.M.S. .................................................................. 50
Color Selected ..................................................... 50
DC 12V OUTPUT terminal .................................. 11
Digital Shift ........................................................... 62
DNR ..................................................................... 63
DOT BY DOT ....................................................... 59
ENTER button ...................................................... 32
Exhaust vent ........................................................ 73
Film Mode ............................................................ 46
Fine Sync ............................................................. 53
Focus ring ............................................................ 26
HIGH CONTRAST/HIGH BRIGHTNESS
MODE button .................................................... 61
Hue ...................................................................... 51
INPUT 1 terminals ............................................... 18
INPUT 1 – 5 modes ............................................. 33
INPUT 2 terminals ............................................... 18
INPUT 3 terminal ................................................. 17
INPUT 4 terminal ................................................. 17
INPUT 5 terminal ................................................. 19
INPUT button ....................................................... 32
Intake vent ........................................................... 73
Kensington Security Standard connector ............ 11
KEYSTONE button .............................................. 36
Keystone correction ............................................. 36
Index
Lamp .................................................................... 76
Lamp replacement indicator ................................ 32
Lens cap .............................................................. 10
Lens shift dial ....................................................... 27
LIGHT button ....................................................... 12
Lightness ............................................................. 51
MENU button ....................................................... 32
NORMAL .............................................................. 60
Optional accessories ........................................... 14
OSD Display ........................................................ 64
PDF ........................................................................ 9
Phase ................................................................... 53
PICTURE SETTING button ................................. 47
Power (ON/OFF) buttons ..................................... 32
Power cord ........................................................... 16
Power indicator .................................................... 32
PRJ mode ............................................................ 69
Progressive Mode ................................................ 46
Remote control .................................................... 12
Remote control sensor ........................................ 13
Remote control signal transmitters ...................... 13
Replacing the lamp .............................................. 76
RESIZE button ..................................................... 58
Reversing/Inverting Projected Images ................ 69
RGB/COMP. button .............................................. 18
RS-232C terminal ................................................ 23
Save Setting ........................................................ 53
Select Setting ....................................................... 54
Selecting the on-screen display language .......... 34
SharpVision Manager ............................................ 9
SIDE BAR ............................................................ 59
Signal Info ............................................................ 55
Signal Type .......................................................... 65
SMART STRETCH .............................................. 59
Special Modes ..................................................... 54
Status ................................................................... 70
STRETCH ............................................................ 59
Supplied accessories ........................................... 14
Target ................................................................... 50
Temperature warning indicator ............................ 74
Terminal cover ..................................................... 11
UNDO button ....................................................... 37
Video System ....................................................... 66
WIRED R/C JACK ............................................... 24
WIRED REMOTE control input terminal ............. 24
Zoom knob ........................................................... 26 
						

							Appendix
-91
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when
shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair
the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for
parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any
Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal
service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of
purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED
WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED
TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein,
or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive
remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute
complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any
way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not
apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
Model Specific Section (In-Home Service)
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded fromWarranty Coverage (if any):
Where to Obtain Service:
What to do to Obtain Service:XV-Z10000 Projector
(Be sure to have this information available when you need service
for your Product.)
One (1) year parts and labor from date of purchase except for the
Projector Lamp for which the warranty period is ninety (90) days
from date of purchase. After the ninety (90) day warranty period on
the Projector Lamp, parts and labor for a lamp replacement are the
responsibility of the consumer.
Cleaning of Optical System and/or replacement of any filter.
Labor & materials required to remove and reinstall a suspended
projector in installations not accessible with a standard (8 step)
ladder or ceilings exceeding 12’ in height.
Labor & materials required to remove and reinstall a projector in
complex systems including, but not limited to, projectors installed
in custom enclosures, projectors connected to third party control
and automation systems, and realignment of projectors installed in
“mirrored” rear projection enclosures.
From a Sharp Authorized Servicer located in the United States. To
find the location of the nearest Sharp Authorized Servicer, call Sharp
toll free at 1-800-BE-SHARP.
Contact your Sharp Authorized Servicer to obtain in-home service
for this Product. The Servicer will come to your home and if
necessary to remove the Product for repair at the Servicer’s facility,
the Servicer will reinstall it upon completion of repair. Be sure to
have Proof of Purchase available.
VALID IN USA ONLY
TO OBTAIN PRODUCT INFORMATION, CALL 1-877-DTV-SHARP OR VISIT www.sharpusa.com. 
						

							-92
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called  Sharp ) gives the following express warranty to the first consumer purchaser for
this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp
Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any
such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the
product as specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp s Authorized Service
Centres or Sharp s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited
to head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including
but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons,
cables and paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or
liquid spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp
product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre
or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp s discretion on any Sharp television
with the screen size of 27  or larger and on any Sharp Over  The Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee
is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and
all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting
from a defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product
or the loss of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs
incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations
and responsibilities of Sharp to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether
based on contract, negligence, strict liability or otherwise.
WARRANTY PERIODS
Projector 1 year (bulb 90 days)
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD.
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East
Mississauga, Ontario
L4Z 1W9
(905) 568-7140
Web site: www.sharp.ca
VALID IN CANADA ONLY 
						

							SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A440WJZZA
XV-Z10000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV-
Z10000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH ............. -1 –  -92
FRANÇAIS ...........
 -1 –  -91
ESPAÑOL ............
 -1 –  -90
PORTUGUÊS ......
 -1 – -90