Sharp Xgmb67xl Manual
Here you can view all the pages of manual Sharp Xgmb67xl Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
47 Useful Features Info This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only au- thorized users have access. • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 63). Even if the prod- uct warranty is valid, the keycode reset will incur a charge. Select “System...
Page 52
48 Input screen for keycode • You can not use the following buttons for keycode: • S STANDBY/ON • f ON • e STANDBY• h ENTER • l RETURN • B MENU/HELP •System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control. Press the 4 buttons on the remote control or on the projector to en- ter the new...
Page 53
49 Useful Features Setting up the Projector Network Environment (“Network” menu) If you do not want others to change the setting for the “Network” menu, set a password. Select “Password”, then press hENTER or Q. • The screen for entering the password appears. 1 1 11 1 1Setting a Password Press P or R to set the first digit in “New Password”, then press Q.2 Enter the remaining 3 digits, then press hENTER. • To return to the previous digit, press O. 3 Enter the same password in “Re- confirm”, then press...
Page 54
50 3 33 3 3 TCP/IP Setting 4 44 4 4Confirming the Projector Information You can confirm the MAC address and projector name. Selectable items IP Address Subnet Mask GatewayDescription Factory default setting: 192.168.150.002 Enter an IP address appropri- ate for the network. Factory default setting: 255.255.255.000 Set the subnet mask to the same as that of the computer and equipment on the network. Factory default setting: 000. 000. 000. 000 * When not in use, set to “000. 000. 000. 000”. Displayed...
Page 55
51 Useful Features Troubleshooting with the “Help” menu Utilizing the “Help” menu func- tions This function advises you to solve the problems during usage. • You can adjust the items with check marks (✔). • The items in the “Help” menu change, de- pending on the input signal or setting that you have selected. •If the problem is not solved, refer to “Troubleshooting”. (See pages 61 and 62.) • When selecting “sRGB” in Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot...
Page 56
52 Cleaning the lensUse a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film on the surface of the lens. As the surface of the lens can easily get damaged, be careful not to scrape or hit the lens. Cleaning the exhaust and intake ventsUse a vacuum cleaner to clean dust from the exhaust vent and the intake vent. Cleaning the projectorEnsure that you have unplugged...
Page 57
53 Appendix Cleaning the Dust Filters • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. Press SSTANDBY/ON on the pro- jector to put the projector into standby mode. • Wait until the cooling fan stops. • Disconnect the power cord and unplug the power cord from the AC socket. Remove the filter holders.• Turn the projector over. To remove the fil- ter holders, press in the tabs while lifting up. Clean the dust...
Page 58
54 Replace the filter holders.• Align the tabs on the filter holders while replacing them, and then press down on the tabs to lock them in place.4 Replacing the Dust Filters • If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center. After removing the filter holders (see step 2 of “Cleaning the Dust Filters”), remove the dust filters, then replace with new ones. • Pick the dust filters up with your...
Page 59
55 Appendix Maintenance Indicators About the lamp indicator When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will be displayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode. At this time, the lamp indicator will illuminate in red. If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. About the...
Page 60
56 Maintenance indicator Problem The internal temperature is abnormally high. The lamp does not illuminate. Time to change the lamp. The lamp does not illuminate. The power indicator blinks in red when the projector is on.Cause • Blocked air intake • Cooling fan breakdown • Internal circuit failure • Clogged air intake • The lamp is shut down abnormally. • Remaining lamp life becomes 5% or less. • Burnt-out lamp • Lamp circuit failure • The dust filter holder or lamp unit cover is open.Possible Solution...