Sharp Xg Ph70x Projector User Manual

							Appendix
-99
To  AC socket
Power cord
ON button
ENTER button
MENU button
H&V LENS 
SHIFT
button
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
• Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1Connect the power cord.
• Plug the power cord into the AC socket
of the projector.
2Reset the lamp timer.
For Lamp 1
• When you reset the timer for AN-
PH7LP1, while simultaneously holding
down 
 a nd , press  on the
projector.
• “LAMP 1 100%” is displayed, indicating
that the lamp timer is reset.
For Lamp 2
• When you reset the timer for AN-
PH7LP2, while simultaneously holding
down 
 and , press  on the
projector.
• “LAMP 2 100%” is displayed, indicating
that the lamp timer is reset. 
						

							-100
Computer Compatibility Chart
•Multiple signal support
Horizontal Frequency: 15–126 kHz
Ve rtical Frequency: 43–200 Hz
Pixel Clock: 12–230 MHz
Sync signal: Compatible with TTL level
Computer
PC/
MAC/ WSHorizontal Frequency (kHz) Vertical 
Frequency (Hz) Horizontal 
Frequency (kHz) Vertical 
Frequency (Hz)
VGA
PC PC
SVGA
XGA VESA 
Standard
Resolution
640 
× 350
1,152 
× 864
1,280 
× 720
1,280 × 768
1,280 × 800
1,360 × 768
1,366 × 768
1,152 
× 882
1,280 
×1,024
1,400 
×1,050
720 
× 350
640 
× 400
720 
× 400
640 
× 480
800 
× 600
1,024 
× 768 Display
Upscale
True
27.0 60
27.0 60
27.0 60
60
31.5 70
31.5 70
31.5
70
31.5 60
34.7 70
37.9 72
37.5 75
43.3 85
47.9 90
53.0 100
61.8 120
78.5 150
80.9 160
100.4 200
31.4 50
35.1 56
37.9 60
44.5 70
48.1 72
46.9 75
53.7 85
56.8 90 DVI
Support VESA 
Standard
Resolution Display DVI
Support
64.0 100
77.2 120
98.3 150
102.1 160
125.6 200
98.8 120 31.5 70
37.9 85
37.9
27.0 85
37.9 85
26.2 50 PC/
MAC/ WS
Advanced Intelligent 
Compression
Advanced Intelligent 
Compression
54.3 60
67.5 75
75.7 80
77.3 85
65.9 72 54.8 60
67.4 74
64.0 60
1,600 
×1,200
SXGA
WXGA
SXGA+ UXGA 91.1 85
74.7 52 80.0 75 78.1 74 74.6 70
81.3 65
90.1 72
93.8 75
106.3 85 75.0 60
108.4 100
64.0 60
87.5 70
MAC 16
MAC 21HP (WS)
WS
MAC 13
MAC 19
PC (WS)
SUN (WS)
Intelligent 
Compression
Upscale
640 
× 480
832 × 624 34.9
1,152 
× 870 68.5 67
60.0
1,280 ×1,024 78.1 72
60.0 60
1,024 
× 768
1,280 
× 960
VGA
SVGA
SXGA
SXGA XGA
True
48.4 60
75
85.9 85
1,152 
× 900 60.9 66
71.9 76 49.6 75
75
90.2 100 64.0 70
64.1 72 45.0 60
47.6 60
47.8 60 47.8 60
62.7 75
113.2 140 35.5 43
40.3 50
48.4 60
58.1 72
68.7 85 60.0 75
73.5 90
77.2 96
80.6 100 56.5 70
•
Compatible with sync on green signal
• UXGA, SXGA+ and SXGA compatible in advanced
intelligent compression
• AICS (Advanced Intelligent Compression and Ex-
pansion System) resizing technology
The following is a list of modes that conform to VESA.  However, this projector supports other signals
that are not VESA standards.
The table below lists signal codes that are compatible with the projector. When the images are distorted or
cannot be projected, adjust the output signal of your computer and so forth while referring to the table below. 
						

							Appendix
-101
Note
•Depending on the notebook computer, the image cannot be displayed or noise may appear in simulta-
neous (CRT/LCD) mode. In this case, turn off the LCD display on the notebook computer. For more
details, refer to the operation manual of the notebook computer.
• When this projector receives 640  × 350 VESA format VGA signals, “640  × 400” appears on the screen.
• When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set to “Auto” or “RGB”, the
image may not be projected as desired. In this case, select either INPUT 4 (video) or INPUT 5 (S-video).
DTV
15.7
31.5
33.8
15.6
31.3
45.0
37.5
33.8
33.8
28.1
480I
/525I480P/525P
540P
576
I /625I576P/625P
720P/750P
720P/750P
1035
I /1125I1080I/1125I1080I/1125I
60
60
60
50
50
60
50
60
60
50Signal Vertical Frequency (Hz) DVI Support (Compatible with HDCP)  Horizontal Frequency (kHz) 
						

							-102
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Po wer to the external connected devices is off.
• The selected input mode is wrong.
•Cables incorrectly connected to side panel of the projector.
•Remote control batteries have run out.
•External output has not been set when connecting notebook computer.
•Cables incorrectly connected to the side panel of the projector.
•“Bright” is set to minimum position.
• The “BLACK SCREEN” function is working.
•Image adjustments are incorrectly set.
(INPUT 1, INPUT 2, INPUT 3 only)
• Input signal type (RGB/Component) is incorrectly set.
(INPUT 4, INPUT 5 only)
• Video Input system is incorrectly set.
•Adjust the focus.
•The projection distance exceeds the focus range.
• There is fog on the lens. If the projector is carried from a cold
room into a warm room, or if it is suddenly heated,
condensation may form on the surface of the lens and the
image will become blurred. Please set up the projector at least
one hour before it is to be used. If condensation should form,
remove the power cord from the wall outlet and wait for it to
clear.
(Computer Input only)
• Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
• Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
• Tu rn off the LCD display of the notebook computer.
•Noise may appear depending on the computer.
•Cables incorrectly connected to side panel of the projector.
•Volume is set to minimum.
• The “MUTE” function is working.
• The “Speaker” menu is set to “OFF”.
•If the picture is normal, the sound is due to cabinet shrinkage
caused by room temperature changes. This will not affect
operation or performance.
• See “Maintenance Indicators”.
Problem
An unusual sound is
occasionally heard from the cabinet.
Maintenance
indicator illuminates or blinks in red.
P age
37
—
45
27 –36
17
27
27 –36
60
50
60
63
76
40
22—
68
68
101 —
27 –36
46
46
73
—
94
Sound is heard but no picture appears.
Color is faded or poor.
Picture is blurred;noise appears.
Picture appears but no sound is heard.
No picture and no sound
or projector does not star t. 
						

							Appendix
-103
CheckProblemPage
The projector cannot be
turned on or put into the standby mode using theON or STANDBY button
on the projector.
All buttons on the
projector and the remote control are unavailable.
Picture is green on INPUT 1or 2
(COMPONENT).
Picture is pink (no green)on INPUT 1, 2 or 3
(RGB).
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes flickers.
The lamps take a long
time to turn on.
Picture is dark.
The remote control cannot be used. •
If the “Keylock Level” menu is set to “Level A” or “Level B”, all or
specific buttons on the projector are unavailable. Use the
remote control to operate the projector.
•If the “Stack Setting” menu is set to “Slave” and the “Keylock
Level” menu is set to “Level B”, all buttons on the projector and
the remote control are unavailable. Connect the remote control
to the projector, and then use the remote control to operate the
projector.
• Change the input signal type setting.
•Image adjustments are incorrectly set.
•When temperature inside the projector increases, the cooling
fan runs faster.
• The lamp indicator is illuminating in red.
Replace the lamp.
•Cables incorrectly connected to the projector or the connected
equipment works improperly.
•If this happens frequently, replace the lamp.
• The lamps will eventually need to be changed.
The lamps have reached the end of its life. Replace the lamps.
•Operate the remote control while pointing it at the projector’s
remote control sensor.
• The remote control may be too far away from the projector.
• If direct sunlight or a strong fluorescent light is shining on the
projector’s remote control sensor, place the projector where it
will not be affected by strong light.
• The batteries may be depleted or inserted incorrectly. Make
sure the batteries are inserted correctly or insert new ones. 85
18
84
85
63
60
9
, 10
93 –95
94
27 –36
97
97
17
17
This projector is equipped with a microprocessor. Its performance could be adversely affected by
incorrect operation or interference. If this should happen, unplug the projector and plug it in again
after more than 5 minutes. 
						

							-104
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first refer to the
“Troubleshooting” section on pages 102 and  103. If this operation manual does not answer
y our question, please contact the SHARP Service departments listed below.
U .S.A. Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
[email protected]
http://www.sharplcd.com
Canada Sharp Electronics of Canada Ltd. (905) 568-7140
http://www.sharp.ca
Mexico Sharp Electronics Corporation Mexico Branch
(525) 716-9000
http://www.sharp.com.mx
Latin America Sharp Electronics Corp. Latin American Group
(305) 264-2277
[email protected]
http://www.siempresharp.com
Germany Sharp Electronics (Europe) GMBH 01805-234675
http://www.sharp.de
U. K. Sharp Electronics (U.K.) Ltd.
08705 274277
http://www.sharp.co.uk/customersupport
Italy Sharp Electronics (Italy) S.P.A. (39) 02-89595-1
http://www.sharp.it
France Sharp Electronics France 01 49 90 35 40
[email protected]
http://www.sharp.fr
Spain Sharp Electronica Espana, S.A. 93 5819700
[email protected]
http://www.sharp.es
Switzerland Sharp Electronics (Schweiz) AG 0041 1 846 63 11
[email protected]
http://www.sharp.ch
Sweden Sharp Electronics ( Nordic ) AB (46) 8 6343600
[email protected]
http://www.sharp.se
A ustria Sharp Electronics (Europe) GMBH
Branch Office Austria
0043 1 727 19 123
[email protected]
http://www.sharp.at Benelux SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
9900-0159 Belgium
http://www.sharp.nl
http://www.sharp.be
http://www.sharp.lu
A ustralia Sharp Corporation of Australia
Pty. Ltd.
1300-135-022
http://www.sharp.net.au
New Zealand Sharp Corporation of New Zealand (09) 634-2059, (09) 636-6972
http://www.sharp.net.nz
Singapore Sharp-Roxy Sales (S) Pte. Ltd. 65-226-6556
[email protected]
http://www.sharp.com.sg
Hong Kong Sharp-Roxy (HK) Ltd. (852) 2410-2623
[email protected]
http://www.sharp.com.hk
T aiwan Sharp Corporation (Taiwan)
0800-025111
http://www.sharp-scot.com.tw
Malaysia Sharp-Roxy Sales & Service Co. (60) 3-5125678
U .A.E. Sharp Middle East Fze
971-4-81-5311
[email protected]
Thailand Sharp Thebnakorn Co. Ltd. 02-236-0170
[email protected]
http://www.sharp-th.com
K orea Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
[email protected]
http://www.sharpkorea.co.kr
India Sharp Business Systems (India) Limited
(91) 11- 6431313
[email protected] 
						

							Appendix
-105
Specifications
Multimedia Projector
XG-PH70X (standard zoom lens attached)/XG-PH70X-N (no lens attached)
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV576 I/DTV576P/DTV720P/DTV1035 I/DTV1080 I
0.7 DLP
® chip  × 1
No. of dots:  786,432 dots (1,024 [H]  × 768 [V])
1.2  × electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard equipment with X\
G-PH70X)260 W  × 2
15-pin mini D-sub connector
Y:  1.0 Vp-p, sync negative, 75  Ω terminated
P
B:  0.7 Vp-p, 75  Ω terminated
PR:  0.7 Vp-p, 75  Ω terminated
750 TV lines (DTV720P)
BNC connector
Y:  1.0 Vp-p, sync negative, 75  Ω terminated
P
B:  0.7 Vp-p, 75  Ω terminated
PR:  0.7 Vp-p, 75  Ω terminated
15-pin mini D-sub connector, 5 BNC connector: RGB separate/composite sync (TTL)/sync
on green type analog input: 0–0.7 Vp-p, positive, 75  Ω terminated
Horizontal sync. signal: TTL level (positive/negative) or composite sync (Apple only)
Ve rtical sync. signal: Same as above
D VI connector (24-pin), RGB (digital), 250 –1,000 mV, 50  Ω (Compatible with HDCP)
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75  Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75  Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75  Ω terminated
ø3.5 mm stereo minijack, RCA terminal
0.5 Vrms, more than 22 k Ω
ø3.5 mm minijack
0.5 Vrms, less than 2.2 k Ω
9-pin D-sub connector
8-pin RJ-45 modular connector
12–230 MHz
43–200 Hz
15–126 kHz
3.0 W (stereo)
3.3 cm round  × 2
AC  100–240 V
6.6 A (AC 100 V)–2.7 A (AC 240 V)
50/60 Hz
650 W (when “Eco Mode” is “OFF”)/570 W (when “Eco Mode” is “ON”) with AC 100 V
620 W (when “Eco Mode” is “OFF”)/550 W (when “Eco Mode” is “ON”) with AC 240 V
0.8 W (AC 100 V) – 1.1 W (AC 240 V) (When “Monitor Out” and “LAN/RS232C” are set to “Disable”.)2,440 BTU/hour (when “Eco Mode” is “OFF”)/2,140 BTU/hour (when “Eco Mode” is “ON”)
with AC 100 V
2,330 BTU/hour (when “Eco Mode” is “OFF”)/2,070 BTU/hour (when “Eco Mode” is “ON”)
with AC 240 V
41°F to 104°F (+5°C to +40°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
16 
5/32  × 7 3/32  × 18 35/64 (410 (W)  × 180 (H)  × 471 (D) mm) (main body only)
16 5/32  × 7 37/64  × 18 35/64 (410 (W)  × 192.1 (H)  × 471 (D) mm) (including adjustment footand projecting parts)
XG-PH70X: 32.9 lbs. (14.9 kg)
XG-PH70X-N: 30.3 lbs. (13.7 kg)
Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
Po wer cord for U.K., Hong Kong and Singapore, Power cord for Australia, New Zealand and
Oceania, RGB cable
, Remote mouse receiver, Cap for the standard zoom lens, Projector
manual and technical reference CD-ROM, Operation manual
Product type Model
Video system
Display device
Standard zoom lens Projection lamp
Component input (INPUT 1)/output (OUTPUT) signal
Horizontal resolution
Component input (INPUT 2) signal
RGB input (INPUT 1/2)/output(OUTPUT) signal
RGB digital input signal (INPUT 3)Video input signal(INPUT 4)
S-video input signal (INPUT 5)
A udio input signal
A udio output signal
(AUDIO OUTPUT 1–5) RS-232C ter minal
LAN terminal Pixel clock
Ve rtical frequency
Horizontal frequency Audio output
Speaker system Rated voltageInput current
Rated frequency
Po wer consumption
Po wer consumption (standby)
Heat dissipation
Operating temperature Storage temperature Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performancespecification figures indicated are nominal values of production units. There may be somedeviations from these values in individual units. 
						

							-106
Glossary
Advanced intelligent compression (Page 100)
High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.
Aspect ratio (Page 48)
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync (Page 70)
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background (Page 77)
Initial setting image projected when no signal is
being output.
Border (Page 48)
Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.
Clock (Page 68)
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)  (Page 61)
Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
wa rmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.
C.M.S. (Color Management System) (Page 64)
Function allows you individually adjust the display
characteristics of six colors (R: Red, Y: Yellow, G:
Green, C: Cyan, B: Blue, M: Magenta)
Dot by Dot (Page 48)
Mode that projects images in their native resolution.
Ke ylock Level (Page 85)
Mode that can lock the operation of projector but-
tons to prevent unauthorized adjustment.
Keystone Correction (Page 41)
Function to digitally correct a distorted image
when the projector is set up at an angle, smooth-
ens out jaggies on keystone images and com-
presses the image not only horizontally but verti-
cally keeping the 4:3 aspect ratio.
Phase (Page 68)
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.
Pict in Pict (Page 74)
The Pict in Pict (picture in picture) function allows
you to display two pictures on the same screen.
Y ou can display the image input from a video as
an inset picture overlapping the main picture in-
put from a computer.
Picture Mode (Page 60)
Image quality enhancement function that offers a
r icher image by brightening the darker portions
of the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and CUSTOM.
Progressive (Page 62)
The progressive display projects a smoother video
image. You can select three different modes: 2D
Progressive, 3D Progressive and Film Mode.
Resize (Page 48)
Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select six different modes: NORMAL, FULL, DOT
BY DOT, BORDER, STRETCH and SMART
STRETCH.
Shifting the lens (Page 38)
Function to adjust the position of the projected im-
age for the position of the screen by shifting the lens
horizontally and vertically.
Smart Stretch (Page 49)
Projects the image fully in a 16:9 screen by en-
larging only the surrounding areas while keeping
the aspect ratio in the middle part of the image at
4:3.
sRGB (Page 64)
An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the color changes according
to DLP features, so that the images are displayed
in a natural tint based on an original image, when
“C.M.S. Adjustment” is set to “sRGB”.
Stack Setting (Page 84)
Setting for the stack projection that allows you to
increase the brightness of an image by stacking
m ultiple projectors and projecting same image
simultaneously. You can control projectors for the
stack projection by assigning a projector as the
master and the other projectors as the slaves.
Stretch (Page 48)
Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.
System Lock (Page 79)
If the “Keycode” set in the projector is not cor-
rectly entered, the projector will not operate even
if signals are entered. 
						

							Appendix
-107
AC soc ket....................................................................... 37
ADJ./MOUSE s witch...................................................... 18
Adjustment buttons ........................................................ 56
Adjustment feet .............................................................. 39
Advanced intelligent  compression.............................. 100
All Reset ........................................................................\
 91
Aspect ratio .................................................................... 48
A udio ........................................................................\
...... 72
A UDIO input (1) ter minal............................................... 27
A UDIO input (2, 3)  terminal........................................... 28
A UDIO input (4, 5)  terminals......................................... 34
A udio Out ....................................................................... 72
A UDIO OUTPUT ter minal............................................. 36
A uto Power  Off............................................................... 79
A uto Search ................................................................... 78
A uto Sync (Auto  Sync adjustment) ............................... 70
AU TO  SYNC button ....................................................... 70
A uto Sync Disp .............................................................. 71
Background .................................................................... 77
BLACK SCREEN b utton................................................ 50
Border ........................................................................\
.... 48
BREAK TIMER  b utton................................................... 50
Bright Boost ................................................................... 61
C .M.S. (Color Management  System)............................ 64
C .M.S. Adjustment ......................................................... 64
Carrying handle ............................................................. 13
Clock ........................................................................\
...... 68
CLR Temp  (Color T emperature).................................... 61
DHCP Client .................................................................. 89
Digi. Shift ........................................................................\
 75
Direct Power  On ............................................................ 87
DNR ........................................................................\
....... 62
Dot By Dot ..................................................................... 48
Eco Mode ....................................................................... 78
ENLARGE buttons ......................................................... 46
ENTER button ................................................................ 56
Exhaust vent .................................................................. 93
F an Mode ....................................................................... 86
Fine Sync ....................................................................... 68
FOCUS buttons ............................................................. 40
FREEZE button ............................................................. 47
Gateway ........................................................................\
. 90
Geometric adjustment ................................................... 42
H & V ke ystone.............................................................. 43
H & V LENS SHIFT  button ............................................ 39
Image Capture ............................................................... 76
Image resizing ............................................................... 44
INPUT 1 – 5  modes....................................................... 45
INPUT 1 ter minal........................................................... 27
INPUT 2 ter minals......................................................... 28
INPUT 3 ter minal........................................................... 29
INPUT 4 ter minal........................................................... 34
INPUT 5 ter minal........................................................... 34
INPUT buttons ............................................................... 45
Intake v ent..................................................................... 93
IP Address ..................................................................... 90
K ensington Security Standard  connector..................... 15
Ke ycode ........................................................................\
. 79
Ke ylock Leve l................................................................. 85
KEYSTONE b utton........................................................ 41
Ke ystone Correction ...................................................... 41
Lamp ........................................................................\
...... 96
Lamp indicators 1,  2...................................................... 94
Lamp Mode .................................................................... 83
Index
Lamp Timer (Lif e) .......................................................... 83
Lamp unit cove r............................................................. 97
LAN terminal .................................................................. 35
LAN/RS232C ................................................................. 88
Language ....................................................................... 92
L-click b utton.................................................................. 19
Lens cap ........................................................................\
 13
MENU button ................................................................. 56
Monitor Out .................................................................... 88
Mouse button ................................................................. 19
MUTE button .................................................................. 46
Network ........................................................................\
.. 89
Nor mal ........................................................................\
... 48
ON button ...................................................................... 37
Options (1) ..................................................................... 74
Options (2) ..................................................................... 82
OSD Display .................................................................. 75
OUTPUT (FOR INPUT 1, 2)  terminal........................... 36
P air Stack ....................................................................... 85
P ass word ....................................................................... 82
Phase ........................................................................\
..... 68
Pict in Pict ...................................................................... 74
Picture ........................................................................\
.... 60
Picture Mode ................................................................. 60
PICTURE MODE b utton................................................ 47
Po wer cord ..................................................................... 37
Po wer indicator .............................................................. 14
PRJ Mode ...................................................................... 84
Progressive .................................................................... 62
R-click b utton................................................................. 19
Remote control .............................................................. 17
Remote control sensor .................................................. 17
Remote mouse receiv er ................................................ 19
Resize ........................................................................\
.... 48
RESIZE button ............................................................... 48
RGB cable ..................................................................... 27
RS-232C ........................................................................\
 87
RS-232C terminal .......................................................... 35
Save  Setting .................................................................. 68
Select Setting ................................................................ 69
Service Mode ................................................................. 90
Set Inputs ....................................................................... 86
Signal Info ...................................................................... 70
Signal Type .................................................................... 63
Smart Stretch ................................................................ 49
Speaker ........................................................................\
.. 73
Special Modes ............................................................... 69
sRGB ........................................................................\
..... 64
Stack Setting ................................................................. 84
STANDBY b utton........................................................... 37
Startup Image ................................................................ 77
Status ........................................................................\
..... 92
Stretch ........................................................................\
... 48
Subnet Mask .................................................................. 90
System Lock .................................................................. 79
TCP/IP ........................................................................\
... 89
T emperature war ning indicator...................................... 94
UNDO button ................................................................. 56
Video System ................................................................ 76
V olume buttons .............................................................. 46
WIRED R/C JA CK ......................................................... 18
WIRED REMOTE ter minal............................................ 18
ZOOM buttons ............................................................... 40 
						

							SHARP CORPORATION