Sharp Xg Ph70x Projector Quickstart Guide

MODEL
XG-PH70X
XG-PH70X-N
MULTIMEDIA PROJECTOR
SETUP MANUAL
Setting up the Screen.......................................... 2
Screen Size and Pr ojection Distance................ 3
Connecting Pin  Assignments.......................... 10
RS-232C Specifications and  Commands........ 12
Setting up the Projector Network Environment... 17
1. Connecting the Projector to  a Computer.......... 18
2. Setting an IP Address  for the Computer .......... 19
3. 
Setting up a Network Connection for the Projector......

-2
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat
and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For an optimal image, position the screen so that it is not in direct...

-3
Screen Size and Projection Distance
The projection screen size varies according to the distance from the lens of the projector to the screen.
The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp
Authorized Projector Dealer to details on all the lenses. (Refer to the lens operation manual when using a
lens.) Also, be sure to have service personnel install the optional lenses.
Install the projector so that projected images are projected onto the...

-4
Standard Zoom Lens (AN-PH31EZ : Standard Equipment with XG-PH70X)
F1.8-F2.0, f=25.6-31.3 mm
NORMAL Mode (4:3)
Picture (Screen) size Projection distance [L]
Diag. [χ
] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
450 (1143 cm) 996 cm ( 392) 560 cm (221)   17.9 m (58 10) 21.9 m (71 11)–280.2 cm (–1105/16) 93.4 cm (3649/64) ±149.4 cm (5853/64)
300 (762 cm) 664 cm (261) 374 cm (147) 12.0 m (39 3) 14.6 m (47 11)–186.8 cm (–7317/32) 62.3 cm (2433/64) ±99.6 cm (397/32)
250 (635 cm) 553 cm...

-5
Fixed Wide Lens (AN-PH10EX)
F2.5, f=11.6 mm
NORMAL Mode (4:3)
The formula for picture size and projection distance
[m/cm]
L (m) = 0.01626
χH1 (cm) = –0.762χH2 (cm) = –0.48768χW (cm) = ±0.22352χ[Feet/inches]
L (ft) = 0.01626χ / 0.3048
H1 (in) = –0.762χ / 2.54
H2 (in) = –0.48768χ / 2.54
W (in) = ±0.22352χ / 2.54
χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the...

-6
Wide-zoom Lens (AN-PH20EZ)
F2.5, f=21.2-25.8 mm
NORMAL Mode (4:3)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.03048
χL2 (m) = 0.03658χH1 (cm) = –0.762χW (cm) = ±0.3048χ[Feet/inches]
L1 (ft) = 0.03048χ / 0.3048
L2 (ft) = 0.03658χ / 0.3048
H1 (in) = –0.762χ / 2.54
W (in) = ±0.3048χ / 2.54
χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of...

-7
Tele-zoom Lens (AN-PH40EZ)
F2.4-F2.5, f=31.9-42.5 mm
Note
•Allow a margin of error in the value in the diagrams above.
• When the distance from the lens center to the bottom of the image [H] is\
 a negative number, this indicates
that the bottom of the image is below the lens center.
NORMAL Mode (4:3)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.04572
χL2 (m) = 0.06096χH1 (cm) = –0.762χW (cm) = ±0.3048χ[Feet/inches]
L1 (ft) = 0.04572χ / 0.3048
L2 (ft) = 0.06096χ / 0.3048
H1...

-8
Tele-zoom Lens (AN-PH50EZ)
F2.5, f=40.8-62.8 mm
Note
•Allow a margin of error in the value in the diagrams above.
• When the distance from the lens center to the bottom of the image [H] is\
 a negative number, this indicates
that the bottom of the image is below the lens center.
NORMAL Mode (4:3)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.06096
χL2 (m) = 0.09144χH1 (cm) = –0.762χW (cm) = ±0.3048χ[Feet/inches]
L1 (ft) = 0.06096χ / 0.3048
L2 (ft) = 0.09144χ / 0.3048
H1 (in) =...

-9
Tele-zoom Lens (AN-PH60EZ)
F2.4-F2.5, f=62.1-97.8 mm
Note
•Allow a margin of error in the value in the diagrams above.
• When the distance from the lens center to the bottom of the image [H] is\
 a negative number, this indicates
that the bottom of the image is below the lens center.
NORMAL Mode (4:3)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.09144
χL2 (m) = 0.14224χH1 (cm) = –0.762χW (cm) = ±0.3048χ[Feet/inches]
L1 (ft) = 0.09144χ / 0.3048
L2 (ft) = 0.14224χ / 0.3048
H1...

-10
RS-232C Terminal: 9-pin D-sub male connector
Pin No. Signal Name I/O Reference
1 Not connected
2R DReceive Data Input Connected to internal circuit
3S DSend Data Output Connected to internal circuit
4 Not connected
5S GSignal Ground Connected to internal circuit
6 Not connected
7R SRequest to Send Connected to CS in internal circuit
8C SClear to Send Connected to RS in internal circuit
9 Not connected
RS-232C Cable Recommended Connection: 9-pin D-sub female connector
Pin No. Signal Pin No. Signal
1CD...