Sharp Xg Ph50x Projector User Manual

							Introduction
-7
1. Read Instructions
All the safety and operating instructions should be read before
the product is operated.
2. Retain InstructionsThe safety and operating instructions should be retained for
future reference.
3. Heed WarningsAll warnings on the product and in the operating instructions
should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
6. AttachmentsDo not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and MoistureDo not use this product near water–for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8. AccessoriesDo not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury
to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the
manufacturer.
9. TransportationA product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
10. VentilationSlots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
11.
Power SourcesThis product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product
dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the
operating instructions.
12. Grounding or PolarizationThis product is provided with one of the following types of
plugs. If the plug should fail to fit into the power outlet,
please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type (mains) plug.
b. Three-wire grounding type (mains) plug with a grounding terminal.
This plug will only fit into a grounding type power
outlet.
IMPORTANT SAFEGUARDS
13. Power-Cord ProtectionPower-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from
the product.
14. LightningFor added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to
lightning and power-line surges.
15. OverloadingDo not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
16. Object and Liquid EntryNever push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
17. ServicingDo not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen intothe product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions, as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance, this indicates a need for service.
19. Replacement PartsWhen replacement parts are required, ensure that the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20. Safety CheckUpon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
21.W all or Ceiling MountingThis product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. HeatThis product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
CAUTION: Please read all of these instructions before you operate this product \
and save these
instructions for later use.
Electrical energy can perform many useful functions. This product has been engineered and manufactured to
assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic
rules for its installation, use and servicing. 
						

							-8
Ensure that you read the following safeguards when
setting up your projector.
Caution concerning the lamp unit
■Potential hazard of glass particles if lamp rup-
tures. In case of lamp rupture, contact your
nearest Sharp Authorized Projector Dealer or
Service Center for replacement.  See “Replac-
ing the Lamp” on page  93.
Caution concerning the setup of the pro-
jector
■ For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from hu-
midity, dust and cigarette smoke. When the
projector is subjected to these environments,
the vents and lens must be cleaned more
often. As long as the projector is regularly
cleaned, use in these environments will not
reduce the overall operation life of the unit.
Internal cleaning should only be performed
by  a Sharp Authorized Projector Dealer or
Service Center.
Do not set up the projector in places ex-
posed to direct sunlight or bright light.
■ Position the screen so that it is not in direct
sunlight or room light. Light falling directly on
the screen washes out the colors, making
viewing difficult. Close the curtains and dim
the lights when setting up the screen in a
sunny or bright room.
The projector may be safely tilted to a
maximum angle of 9 degrees.
■ Placement should be within 9 degrees of
horizontal.
If you have application requiring tilt angle
exceeding 9 degrees, please check with your
local Sharp sales office.
Warning about placing the projector in
a high position
■ When placing the projector in a high posi-
tion, ensure to secure it carefully to avoid per-
sonal injury caused by the projector falling
down.
Do not subject the projector to hard im-
pact and/or vibration.
■Take care with the lens so as not to hit or
damage the surface of the lens.
Rest your eyes occasionally.
■ Continuously watching the screen for long
hours will cause eye strain. Ensure to occa-
sionally rest your eyes.
Av oid locations with extremes of tem-
perature.
■ The operating temperature of the projector
is from 41°F to 104°F (+5°C to +40°C).
■ The storage temperature of the projector is
from –4°F to 140°F (–20°C to +60°C).
9°
IMPORTANT SAFEGUARDS 
						

							Introduction
-9
Using the projector in other countries
■The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, ensure
to use an appropriate power cord for the coun-
try you are in.
Temperature monitor function
■If the projector starts to over-
heat due to setup problems or
b lockage of the air vents, “
”
and “
”  will illuminate in
the lower left corner of the picture. If the tem-
perature continues to rise, the lamp will turn off,
the temperature warning indicator on the pro-
jector will blink, and after a 90-second cooling-
off period the projector will enter the standby
mode. Refer to “Maintenance Indicators” on
page  91 for details.
Info
•The cooling fan regulates the internal tem-
perature, and its performance is automati-
cally controlled. The sound of the fan may
change during projector operation due to
changes in the fan speed. This does not
indicate malfunction.
• Do not unplug the power cord during pro-
jection or cooling fan operation. This can
cause damage due to rise in internal tem-
perature, as the cooling fan also stops.
Optional lens installation
■ Be sure to have service personnel install the
optional lenses.
Do not block the intake and exhaust
vents.
■Allow at least 11 13/16 inches (30 cm) of space
between the exhaust vent and the nearest
w all or obstruction.
■ Ensure that the intake vents and the exhaust
vent are not obstructed.
■ If the cooling fan becomes obstructed, a pro-
tection circuit will automatically put the pro-
jector into standby mode to prevent overheat
damage. This does not indicate a malfunc-
tion (See pages  91 and  92.). Remove the pro-
jector power cord from the wall outlet and wait
at least 10 minutes. Place the projector where
the intake and exhaust vents are not blocked,
plug the power cord back in and turn on the
projector. This will return the projector to the
normal operating condition.
Caution regarding usage of the projector
■ When  using the projector, ensure not to sub-
ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with the
lens. If you  are not to use  the projector for a
long time, en sure to unplug the power cord from
the wall outlet, and disconnect any other cables
connected to it.
■ Do not use the projector while holding the
lens.
■ When storing the projector, ensure to attach
the lens cap to the projector. (See page  13.)
■ Do not expose the projector to direct sunlight
or near heat sources. The projector may
change color or become deformed.
Other connected equipment
■When connecting a computer or other audio-
visual equipment to the projector, make the
connections AFTER unplugging the power
cord of the projector from the AC outlet and
turning off the equipment to be connected.
■ Please read the operation manuals of the pro-
jector and the equipment to be connected for
instructions on how to make the connections. 
						

							-10
PDF operation manuals in several languages are included in the CD-ROM, s\
o that you can
work with the projector. To utilize these manuals, you need to install Adobe® Reader® on your
computer (Windows® or Macintosh®).
Please download Adobe
® Reader® from the Internet (http://www.adobe.com).
Accessing the PDF manuals
For Windows®:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4
When you want to view the operation manual
1) Double click the “MANUALS” folder.
2) Double click the language (name of the
folder) that you want to view.
3) Double click the “PH50” pdf file to access the projector manuals.
When you want to view the setup guide
1) Double click the “SETUP” folder.
2) Double click the language (name of the
folder) that you want to view.
3) Double click the “S_PH5” pdf file to access the setup guide. For Macintosh
®:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3
When you want to view the operation manual
1) Double click the “MANUALS” folder.
2) Double click the language (name of the
folder) that you want to view.
3) Double click the “PH50” pdf file to access the projector manuals.
When you want to view the setup guide
1) Double click the “SETUP” folder.
2)Double click the language (name of the
folder) that you want to view.
3) Double click the “S_PH5” pdf file to access the setup guide.
How to Access the PDF Operation Manuals
Info
•If the desired pdf file cannot be opened by double clicking the mouse, start Adobe® Reader® first, then
specify the desired file using the “File”, “Open” menu.
SETUP GUIDE
Refer to the “SETUP GUIDE” contained on the supplied CD-ROM for de\
tails.
Setting up the Screen .................................... 2
Screen Size and Projection Distance ........... 3
Connecting Pin Assignments ..................... 10
RS-232C Specifications and Commands ... 12
Setting up the Projector Network Environment ............................................ 17
Controlling the Projector via LAN .............. 23 Setting the Projector Using
RS-232C or Telnet ................................... 28
Controlling the Projector Using RS-232C or Telnet ................................... 31
Stack Projection ........................................... 38
Video Wall  Projection ................................... 41
Tr oubleshooting ........................................... 50
Dimensions ................................................... 53 
						

							Introduction
-11
Accessories
Two R-6 batteries
(“AA” size, UM/SUM-3, HP-7 or similar)
Power cord
*
F or U.S., Canada, etc.
(12 (3.6 m))
9NK3090152800 For Europe, except U.K.
(6 (1.8 m))
9NK3090152700
*Use the power cord that corresponds to the wall outlet in your country.
Projector manual and
technical reference
CD-ROM
9NK3532094500
(1)
(2) (3) (4)
Remote mouse receiver
(53 (1.6 m))
9NK3790197000Cap for the standard zoom lens
9NK3797200400
Supplied accessories
RGB cable
(910 (3.0 m))
9NK3080431000 For U.K., Hong Kong
and Singapore
(6 (1.8 m))
9NK3090152900
F
or Australia, New
Zealand and Oceania
(6 (1.8 m))
9NK3090152600
Operation manual
(this manual)
9NK5010011800
Remote control
9NK5041808700
■ Cable
3 RCA to 15-pin D-sub cable (910 (3.0 m)) AN-C3CP2
■ Lamp
Lamp unit 1 AN-PH50LP1
Lamp unit 2 AN-PH50LP2
Note
•Some of the optional accessories may not be available depending on the r\
egion. Please check with your
nearest Sharp Authorized Projector Dealer or Service Center.
Optional accessories 
						

							-12
Accessories
■Lens Projection distance for 100 screen size
Fixed wide lens ( × 0.8) AN-PH10EX 54 (1.6 m)
Wide-zoom lens ( × 1.5 – 1.8) AN-PH20EZ 10 – 12 (3.0 m – 3.7 m)
Standard zoom lens ( × 1.8 – 2.2) AN-PH30EZ 12 – 148 (3.7 m – 4.5 m)
(attached to XG-PH50X)
Tele-zoom lens ( × 2.25 – 3.00) AN-PH40EZ 15 – 20 (4.6 m – 6.1 m)
Tele-zoom lens ( × 3.0 – 4.5) AN-PH50EZ 20 – 30 (6.1 m – 9.1 m)
Tele-zoom lens ( × 4.5 –7.0) AN-PH60EZ 30 – 468 (9.1 m – 14.2 m)
Optional lenses
No lens is attached to XG-PH50X-NL. The standard zoom lens is attached t\
o XG-PH50X.
The optional lenses from Sharp are also available for specialized applic\
ation. Please see
your nearest Sharp Authorized Projector Dealer for details on all the lenses. (Refer to the
lens operation manual when using a lens.) Also, ensure to have service personnel install the
optional lenses.
Throw Distance
The graph below is for 100 inches (254 cm) screen with 4:3 normal mode\
.
Screen
5 101520253035 4550 40 (ft)
Standard zoom lens (AN-PH30EZ)12–148 (3.7 m–4.5 m)
Throw distance ratio 1:1.8–2.2
Fixed wide lens (AN-PH10EX)
54 (1.6 m)
Throw distance ratio 1:0.8
Tele-zoom lens (AN-PH40EZ) 15–20 (4.6 m–6.1 m)
Throw distance ratio 1:2.25–3.00
Tele-zoom lens (AN-PH50EZ) 20–30 (6.1 m–9.1 m)
Throw distance ratio 1:3.0–4.5
Tele-zoom lens (AN-PH60EZ)30–468 (9.1 m–14.2 m)
Throw distance ratio 1:4.5–7.0
Wide-zoom lens (AN-PH20EZ) 10–12 (3.0 m–3.7 m)
Throw distance ratio 1:1.5–1.8 
						

							Introduction
-13
37
37
45
70
40
40
73
39
41
56
39
56
56
56
46
17
45
14
14·91
14·91
14·91
94
90
ENTER buttonFor setting items selected or adjusted on the menu.
KEYSTONE buttonFor entering the Keystone  Correction mode.
Carrying handleFor carrying theprojector. 
STANDBY buttonFor putting the projector into standby mode.
ON buttonFor turning the power on.
Adjustment buttons  (' /" /\ /| )
For selecting menu items 
and other settings.
ZOOM buttonFor adjusting the projected  image size.
FOCUS buttonFor adjusting the focus.
39
Power indicator
MENU button
For displaying adjustment 
and setting screens.
UNDO buttonFor undoing an operation 
or returning to the previous 
display.
AUTO SYNC buttonFor automatically 
adjusting images when 
connected to a computer.
INPUT 1, 2, 3 buttonFor switching input mode 
1, 2 or 3. 
INPUT 4, 5 buttonFor switching input mode 
4 or 5. 
Volume buttonsFor adjusting the speaker 
sound level.
Temperature warning 
indicator
Lamp indicator 2 Lamp indicator 1
Remote control  sensor
Speaker
Adjustment foot 
(on the bottom of  the projector)
90Intake vent Adjustment foot 
(on the bottom of 
the projector)
Lamp unit cover
Intake vent 
73Speaker
H & V LENS SHIFT button
For shifting the lens horizontally 
and vertically.
Projector
Part Names and Functions
•Attaching the lens cap
Push the lens cap on until it clicks
into position.
• Removing the lens cap
Pull the lens cap directly outward.
Numbers in  refer to the main pages in this operation manual where the topic is explained.
T op View
Front View 
						

							-14
About the Indicators on the Projector
Power indicator
Red on ...
 Normal (Standby)
Green on  ...
 Normal (Power on)
Red blinks  ...
 The intake vent cover is open. 
(See page  90.)
Temperature warning indicator
Off  ...
 Normal
Red blinks/on  ...
The internal temperature is abnormally
high. (See page  91.)
Lamp indicators 1, 2
Green on  ...
 Normal
Green blinks  ...
 
The lamp is warming up.
Red on  ...
 The lamp has been shut down abnormally or 
needs to be changed. (See page  91.)
Part Names and Functions 
						

							Introduction
-15
Projector (Side View)
Using the Kensington Lock
•This projector has a Kensington Security Standard connector for use with\
 a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructi\
ons on how to use it to secure the
projector.
Numbers in  refer to the main pages in this operation manual where the topic is explained.
INPUT 1 terminalTerminal for computer RGB 
and component signals.
AUDIO input (1) terminalAudio input terminal for  INPUT 1.
INPUT 2 terminalsBNC terminals for computer RGB and component  signals.
INPUT 4 terminalTerminal for connecting video equipment.
INPUT 5 terminalTerminal for connecting 
video equipment with an  S-video terminal.
AUDIO input (4, 5) terminalsShared audio input terminals for  INPUT 4 and 5.
RS-232C terminalTerminal for controlling the 
projector using a computer.
WIRED REMOTE terminalFor connecting the remote 
control to the projector when  the signals from the remote  control cannot reach the remote control sensor.
INPUT 3 terminalTerminal for DVI digital RGB 
and digital component signals.
OUTPUT (FOR INPUT 1, 2) 
terminal
Output terminal for computer 
RGB and component signals. 
Shared for INPUT 1 and 2.
AUDIO input (2, 3) terminalShared audio input terminal for 
INPUT 2 and 3.
AUDIO OUTPUT terminalAudio output terminal shared 
for INPUT 1–5.
Remote control sensor
Exhaust ventThe speed and pitch of 
the cooling fan may 
change during operation 
in response to internal 
temperature changes. 
This is normal operation 
and does not indicate a 
malfunction.
AC socketConnect the supplied Power 
cord.
Kensington Security 
Standard connector LAN terminal
Terminal for controlling the 
projector using a computer 
via network.
37
17
90
35
29
36
28
36
27
27
28
35
34
18
34
34
T
erminals Refer to “INPUT/OUTPUT Terminals and Connectable Main Equipment” on
page 24. 
						

							-16
Note
•All the buttons on the remote control, except the mouse/adjustment button and the ADJ./MOUSE switch,
are made of luminous material that is visible in the dark. Visibility will diminish over time. Exposure to
light will recharge the luminous buttons.
Remote Control
40
18
37
56
39
40
45
70
18
48
37
47
19
41
46
50
46
46
50
47
STANDBY buttonFor putting the projector into  
standby mode.
ZOOM buttonsFor adjusting the projected  image size.
KEYSTONE buttonFor entering the Keystone Correction mode.
ENLARGE (enlarge/reduce)  buttons
For enlarging/reducing part of the 
image.
INPUT 1, 2, 3, 4 and 5 buttonsFor switching to the respective input modes.
AUTO SYNC buttonFor automatically adjusting images when connected to a computer.
BREAK TIMER button For setting the break time. 
L-click buttonFor the left click while the 
ADJ./MOUSE switch is the  MOUSE position. 
FOCUS buttonsFor bringing the projected image  into focus.
Mouse/adjustment button 
(' /" /\ /| )
• For moving the computer 
cursor while the 
ADJ./MOUSE switch is the 
MOUSE position.
•  For selecting menu items 
while the ADJ./MOUSE 
switch is the ADJ. position. 
ENTER buttonFor setting items selected or 
adjusted on the menu.
FREEZE buttonFor freezing images.
RESIZE buttonFor switching the screen size.
BLACK SCREEN buttonFor temporarily display the black 
screen. 
PICTURE MODE button
For switching the picture mode.
WIRED R/C JACKFor connecting the remote control 
to the projector when the signals 
from the remote control cannot 
reach the remote control sensor.
V olume buttonsFor adjusting the speaker sound level.
MUTE buttonFor temporarily turning off the 
sound.
R-click/UNDO button•  For the right click while the 
ADJ./MOUSE switch is the 
MOUSE position.
•  For undoing an operation or 
returning to the previous 
display while the ADJ./MOUSE 
switch is the ADJ. position.
MENU buttonFor displaying adjustment and 
setting screens.
ON buttonFor turning the power on.
ADJ./MOUSE switchFor switching the remote control 
modes.
H & V LENS SHIFT buttonFor shifting the lens horizontally 
and vertically.
19·56
19·56
Numbers in   refer to the main pages in this operation manual where the topic is explained.
Part Names and Functions