Sharp Xg Ph50x Nl Projector User Manual

Useful Features
-57
3Press '
' '
'
'  or 
"
" "
"
"  to select the item
you want to adjust.
• Pressing  displays the items on the
lower part of the “Picture” menu.
To adjust the pro-
jected image while
viewing it
Press .
• The selected single adjustment item
(e.g. “Bright”) appears instead of the
menu.
• When pressing 
'
' '
'
'  or 
"
" "
"
" , the following
item (“Color” after “Bright”) will be dis-
played.
Note
• Press  to...

-58
Menu items
Menu Selections (Settings)
Example: Setting “OSD Display”
•This operation can also be performed by using
the buttons on the projector.
1Press .
• The “Picture” menu screen for the se-
lected input mode is displayed.
2Press 
\
\ \
\
\  or 
|
| |
|
|  to display the other
menu items.
• There are eight menu items as shown
below.
Note
•The “Fine Sync” menu is not available
for selecting INPUT 4 or INPUT 5.
Example: “Options (1)” screen menu
The menu can be operated to achieve two functions,...

Useful Features
-59
Sub menu
3Press '
' '
'
'  or 
"
" "
"
"  to select the
item you want to set.
Note
• Press  to return to the previous
screen.
• In some menu, select the icon using
 .
4Press 
|
| |
|
|  to shift the cursor to the
sub menu.
5Press  '
' '
'
'  or 
"
" "
"
"  to select the set-
ting of the item displayed in the
sub menu.
6Press .
• The selected item is set.
Note
•Some adjustment items will display a...

-60
You can adjust the projector’s picture to your preferences using the “Picture” menu.
Picture Adjustment (“Picture” menu)
Selecting the  Picture Mode
This function allows you to select the picture
mode in accordance with brightness of the room
or content of the image to be projected.
In all picture modes, items on the “Picture” menu
can be adjusted and saved.
Menu operation  Page 58
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Picture Modes
Note
• You can also press  on the...

Useful Features
-61
Adjusting the Color Temperature
Menu operation  Page 56
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of  Color Temperature  Settings
Note
• “CLR Temp” cannot be set when “C.M.S. Ad-
justment” on the “C.M.S.” menu is set to “sRGB”.
(See page  64.)
Selectable items
4500K
10500K
Description
F or lower color temperature for warmer,
reddish incandescent-like images.
F or higher color temperature for cooler,
bl uish, fluorescent-like images.
Emphasizing the Contrast...

-62
Selecting the Progressive Mode
Menu operation  Page  58
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of  Progressive
*The film source is a digital video recording with the original
encoded as is at 24 frames/second. The projector can con-
vert this film source to progressive video at 60 frames/sec-
ond with NTSC and PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a high-definition image.
Note
•In NTSC or PAL60Hz, even if the 3D Progressive
mode has been set,...

Useful Features
-63
Signal Type Setting
This function allows you to select the input sig-
nal type RGB or component for INPUT 1, INPUT
2 or INPUT 3.
Menu operation  Page 58
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Signal Type Settings
INPUT 1/INPUT 2
Description
Input signals are automatically recog-
nized as RGB or component.
Set when RGB signals are received.
Set when component signals are
received.
Selectable items
Auto
RGB
Component
INPUT 3
Description
Set when digital...

-64
Color Management System (“C. M. S. ” menu)
This function allows you to individually adjust the display characteristics of six colors (R:
Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta).
Selecting the Color Repro-
duction Mode
This function allows you to select the color re-
production mode for the projected images.
Menu operation  Page 58
Example: “C.M.S.” screen menu
Description of C.M.S. Adjustment
Note
•sRGB is an international standard of color repro-
duction regulated by the IEC...

Useful Features
-65
For more chromatic value of
the target color
For less chromatic value of
the target colorFor more brightness of the
target color
For less brightness of the
target color
Setting the Brightness of the
Target Color
This function allows you to set the brightness of
the selected target color.
Menu operation  
Page  56
Example: “C.M.S.” screen menu
Description of Brightness
Press  \ Press |
Setting the Chromatic Value
of the Target Color
This function allows you to set the chromatic
value...

-66
For stronger yellow of the
target color
For stronger red of the
target color
Setting the Hue of the Target
Color
This function allows you to set the hue of the
selected target color.
Menu operation  
Page  56
Example: “C.M.S.” screen menu
Description of Hue
Press \ Press |
Resetting User-defined
Color Settings
This function allows you to reset the specific tar-
get color or all of the six colors.
Menu operation  Page  56
Example: “C.M.S.” screen menu
Description of Reset
Description
“Lightness”,...