Sharp Xg Ph50x Nl Projector User Manual

Introduction
-7
1. Read Instructions
All the safety and operating instructions should be read before
the product is operated.
2. Retain InstructionsThe safety and operating instructions should be retained for
future reference.
3. Heed WarningsAll warnings on the product and in the operating instructions
should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or...

-8
Ensure that you read the following safeguards when
setting up your projector.
Caution concerning the lamp unit
■Potential hazard of glass particles if lamp rup-
tures. In case of lamp rupture, contact your
nearest Sharp Authorized Projector Dealer or
Service Center for replacement.  See “Replac-
ing the Lamp” on page  93.
Caution concerning the setup of the pro-
jector
■ For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from...

Introduction
-9
Using the projector in other countries
■The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, ensure
to use an appropriate power cord for the coun-
try you are in.
Temperature monitor function
■If the projector starts to over-
heat due to setup problems or
b lockage of the air vents, “
”
and “
”  will illuminate in
the lower left corner of the picture. If the tem-
perature continues...

-10
PDF operation manuals in several languages are included in the CD-ROM, s\
o that you can
work with the projector. To utilize these manuals, you need to install Adobe® Reader® on your
computer (Windows® or Macintosh®).
Please download Adobe
® Reader® from the Internet (http://www.adobe.com).
Accessing the PDF manuals
For Windows®:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4
When you want to view the operation manual
1) Double...

Introduction
-11
Accessories
Two R-6 batteries
(“AA” size, UM/SUM-3, HP-7 or similar)
Power cord
*
F or U.S., Canada, etc.
(12 (3.6 m))
9NK3090152800 For Europe, except U.K.
(6 (1.8 m))
9NK3090152700
*Use the power cord that corresponds to the wall outlet in your country.
Projector manual and
technical reference
CD-ROM
9NK3532094500
(1)
(2) (3) (4)
Remote mouse receiver
(53 (1.6 m))
9NK3790197000Cap for the standard zoom lens
9NK3797200400
Supplied accessories
RGB cable
(910 (3.0 m))
9NK3080431000 For...

-12
Accessories
■Lens Projection distance for 100 screen size
Fixed wide lens ( × 0.8) AN-PH10EX 54 (1.6 m)
Wide-zoom lens ( × 1.5 – 1.8) AN-PH20EZ 10 – 12 (3.0 m – 3.7 m)
Standard zoom lens ( × 1.8 – 2.2) AN-PH30EZ 12 – 148 (3.7 m – 4.5 m)
(attached to XG-PH50X)
Tele-zoom lens ( × 2.25 – 3.00) AN-PH40EZ 15 – 20 (4.6 m – 6.1 m)
Tele-zoom lens ( × 3.0 – 4.5) AN-PH50EZ 20 – 30 (6.1 m – 9.1 m)
Tele-zoom lens ( × 4.5 –7.0) AN-PH60EZ 30 – 468 (9.1 m – 14.2 m)
Optional lenses
No lens is attached to...

Introduction
-13
37
37
45
70
40
40
73
39
41
56
39
56
56
56
46
17
45
14
14·91
14·91
14·91
94
90
ENTER buttonFor setting items selected or adjusted on the menu.
KEYSTONE buttonFor entering the Keystone  Correction mode.
Carrying handleFor carrying theprojector. 
STANDBY buttonFor putting the projector into standby mode.
ON buttonFor turning the power on.
Adjustment buttons  (' /" /\ /| )
For selecting menu items 
and other settings.
ZOOM buttonFor adjusting the projected  image size.
FOCUS...

-14
About the Indicators on the Projector
Power indicator
Red on ...
 Normal (Standby)
Green on  ...
 Normal (Power on)
Red blinks  ...
 The intake vent cover is open. 
(See page  90.)
Temperature warning indicator
Off  ...
 Normal
Red blinks/on  ...
The internal temperature is abnormally
high. (See page  91.)
Lamp indicators 1, 2
Green on  ...
 Normal
Green blinks  ...
 
The lamp is warming up.
Red on  ...
 The lamp has been shut down abnormally or 
needs to be changed. (See page  91.)
Part Names and...

Introduction
-15
Projector (Side View)
Using the Kensington Lock
•This projector has a Kensington Security Standard connector for use with\
 a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructi\
ons on how to use it to secure the
projector.
Numbers in  refer to the main pages in this operation manual where the topic is explained.
INPUT 1 terminalTerminal for computer RGB 
and component signals.
AUDIO input (1) terminalAudio input terminal for  INPUT...

-16
Note
•All the buttons on the remote control, except the mouse/adjustment button and the ADJ./MOUSE switch,
are made of luminous material that is visible in the dark. Visibility will diminish over time. Exposure to
light will recharge the luminous buttons.
Remote Control
40
18
37
56
39
40
45
70
18
48
37
47
19
41
46
50
46
46
50
47
STANDBY buttonFor putting the projector into  
standby mode.
ZOOM buttonsFor adjusting the projected  image size.
KEYSTONE buttonFor entering the Keystone Correction mode....