Sharp Xg P25x Projector User Manual

E-38
Basic Operation
Using the GUI (Graphical User Interface) Menu Screen
Basic Operations
This projector has two sets of menu screens that allow you to adjust the image and various projector
settings. These menu screens can be operated from the projector or the remote control with the following
procedure.
1 PressMENUto display the INPUT 1, 2, 3, 4 or 5
mode menu bar.
2Pressß/© to select an adjustment menu on the
menu bar.
3Press∂/ƒ to select a specific adjustment item.
4To display a single adjustment...

E-39
Basic Operation
[ON/OFF][ON/OFF]
PRJ Mode
Stack Setting
Keylock Level
Set Inputs
RS-232C
Set ID No.
PasswordCeilingFront
CeilingRear Front
Rear
Level B
Input 1
Input 2
Input 3
Input 4
9600bps
115200bps
ID No. Input 5
38400bps
Old Password
Reconfirm New Password Slave
Level A Master Normal
Normal
Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Status
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
PictureOptions (2)
Options (1) Fine Sync
AudioTint30 30
Color30 30...

E-40
Basic Operation
Menu Bars
Items on the INPUT 4 or 5 Mode Menu Bar
Main menuSub menuMain menuSub menuPictureOptions (2)
AudioTint30 30
Color30 30
Sharp30 30
Contrast30 30Bright30 30
Red30 30Blue
Reset30 30CLR Temp
Progressive Mode3 32D Progressive
3D Progressive
FAO
VAO Audio Out
SpeakerFilm Mode
Background
Startup ImageTreble30 30
Balance30 30
Bass30 30Reset
Sharp
Sharp Custom
Custom Blue
None
None Options (1)DNR
OSD Display
[ON/OFF] [ON/OFF]
Video SystemNormal
PAL (50/60Hz)...

E-41
Basic Operation
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings. See page
38 for the procedure details.
e. g. RGB input in INPUT 1 or 2 mode
ß button
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blueFor more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
©...

E-42
Basic Operation
Adjusting the Picture
Progressive ModeThis function allows you to select the progressive display of a video signal. The progressive display
projects a smoother video image. See page 38 for the procedure details.
Selects the progressive conversion mode.
2D Progressive
This function is useful to display fast-moving images such
as sports and action films. This mode optimizes the image
in a displayed frame.
3D ProgressiveThis function is useful to display relatively slow-moving
images...

E-43
Basic Operation
• Computer image adjustments can be made easily by pressing AUTO SYNC (). See page 45 for details.
• To reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and press ENTER.
Adjusting the Computer Images (RGB menu only)
When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference
may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions
of the screen. Should this...

E-44
Basic Operation
Adjusting the Computer Images (RGB menu only)
Special Mode AdjustmentOrdinarily, the type of input signal is detected and the correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu
screen may need to be selected to match the computer display mode. See page 
38 for the procedure
details.
• Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may...

E-45
Basic Operation
Adjusting the Computer Images (RGB menu only)
Auto Sync Adjustment• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by setting
“Auto Sync” to “Normal” or “High Speed” in the projector’s GUI menu. See page 
38 for the procedure
details.
Off• Synchronized adjustment is not automatically performed.
• Press AUTO SYNC to perform manual adjustment.
Normal• Synchronized adjustment is automatically performed...

E-46
Basic Operation
Adjusting the Sound
This projector’s audio is factory preset to standard settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings. See page 38 for the procedure details.
ß buttonSelected item
Increased audio from the right speaker
For stronger treble
For stronger bass
© button
Increased audio from the left speaker
For weaker treble
For weaker bassBalance
Treble
Bass
Reset
All audio adjustment items are returned to the factory preset...

E-47
Basic Operation
Displaying Dual Pictures (RGB menu only)
Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3.  See page 
38 for the procedure details.
Reducing Image Noise (VIDEO menu only)
Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color
noise. See page 38 for the procedure details.
• If the...