Sharp Xg P25x Projector User Manual

E-28
Setup & Connections
Adjusting the Projection Distance
AN-P9MX
Throw distance ratio
1:0.9
NORMAL Mode (4:3)
300
200
150
100
84
72
60
40240
160
120
80
67
58
48
32180
120
90
60
50
43
36
2418 1
12 0
9 0
5 11
4 11
4 2
3 6
2 3(5.5 m)
(3.7 m)
(2.7 m)
(1.8 m)
(1.5 m)
(1.3 m)
(1.1 m)
(0.7 m)Diag. WidthScreen size (4:3) (X)
HeightProjection distance (L)7 6
5 0
3 9
2 6
2 1
1 10
1 6
1 0(228.6 cm)
(152.4 cm)
(114.3 cm)
(76.2 cm)
(64.0 cm)
(54.9 cm)
(45.7...

E-29
Setup & Connections
Adjusting the Projection Distance
AN-P48EZ
Throw distance ratio
1:4.6 to 6.1
NORMAL Mode (4:3)
3
0
0
2
0
0
1
5
0
1
0
0
8
4
7
2
6
02
4
0
1
6
0
1
2
0
8
0
6
7
5
8
4
81
8
0
1
2
0
9
0
6
0
5
0
4
3
3
61
1
9 9
8
0 1
6
0 0
4
0 4
3
3 1
0
2
9 2
2
4 3(3
6
.5
 m
)
(2
4
.4
 m
)
(1
8
.3
 m
)
(1
2
.3
 m
)
(1
0
.3
 m
)
(8
.9
 m
)
(7
.4
 m
)Diag.Width Screen size (4:3) (X)
HeightProjection distance (L)
Maximum (l1)9
1 6
6
1 4
4
5 1
1
3
0 1
0
2
5 1
1
2...

E-30
Setup & Connections
Rear Projection
• Place a translucent screen between the projector and
the audience.
• Use the projector’s menu system to reverse the
projected image. (See page 
51 for use of this
function.)
• Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
Projection Using a Mirror
• When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the...

E-31
Operation Buttons
Selecting the Input Signal Source
Using the Operation Buttons
Press INPUT 1.2.3 or INPUT 4.5on the projector or
INPUT (1,2,3,4 or 5) on the remote control to change
the mode.
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
INPUT 1 ModeINPUT 2 ModeINPUT 3 Mode
INPUT 4 ModeINPUT 5 Mode
On-screen Display Projector Remote control
INPUT
Adjusting the Volume
PressVOLUME /to...

E-32
Operation Buttons
This function can be used to superimpose a black
screen over the projected image.
Blacking out the Projected ImagePressBLACK SCREEN. The screen turns black and
“BLACK SCREEN” is displayed on the screen. To return
to the original projected image, pressBLACK SCREEN
again.
Superimposing a Black Screen
Projector
Projected Image
sg
Displaying a Still Image
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer...

E-33
Operation Buttons
Magnifying a Specific Portion of an Image
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
1PressENLARGE () to zoom in. (Press ENLARGE
() to zoom out.)
149163664
2To return to 1, press UNDO.
• If you press ENLARGE () when the zoom is set to 
1,
no change will occur. And if you press ENLARGE () when
the zoom is set to 
64, no change will occur.
• If the input signal is changed during...

E-34
Operation Buttons
Displaying and Setting the Break Timer
Remote controlThis function can be used to show the remaining time
for break during meeting.
1PressBREAK TIMER. The timer starts to count
down from 5 minutes.
• You can set the Break Timer 1 to 60 minutes with ∂/ƒ.
The timer starts to count down as soon as ∂/ƒ is
pressed.
2PressBREAK TIMER to cancel the Break Timer.
BREAK TIMER ∂/ƒ
Computer Image Adjustments using AUTO SYNC
This function can be used to automatically adjust a
computer...

E-35
Operation Buttons
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or
SMART STRETCH image.
1PressRESIZE. Each timeRESIZEis pressed, the
picture mode changes as shown below.
2To return to the standard image, pressUNDOwhile
“RESIZE” is displayed on the screen.
COMPUTER
Projector
Remote control
UNDO
RESIZE
1024
 768 – 800
 600...

E-36
Operation Buttons
Adjusting the Picture Aspect Ratio
VIDEO
1024
 768 768 
 576*
––
720P, 1035I, 1080I1024
 576*1024
 576*
–480I, 480P, 580I, 580P, 
NTSC, PAL, SECAM
• “STRETCH” is fixed when 720P, 1035I or 1080I signals are entered.
* The Digital Shift function can be used with these images.
480I, 480P, 580I, 580P,
NTSC, PAL, SECAM
720P, 1035
I, 1080I
NORMAL BORDER STRETCH SMART STRETCH
4:3 aspect ratio
Letter box, squeeze
16:9 aspect ratio
Input SignalOutput screen image
NORMAL
Projects a full...

E-37
Operation Buttons
Gamma Correction Function
On-screen Display
(Example: RGB mode)
ss s
STANDARD
PRESENTATION
CINEMA
CUSTOM
Projector• Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.
• Four gamma settings are available to allow for
differences in the images displayed and in the
brightness of the room.
• When you are displaying images with frequent, dark
scenes, such as a...