Sharp Xg P20xu Projector User Manual

E-40
Operation Buttons
This function can be used to superimpose a black
screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and
“BLACK SCREEN” is displayed on the screen. To return
to the original projected image, press BLACK SCREEN
again.
You can use this tool by accessing the “Button Assign”
list on your GyroRemote. Choose popup list “2/5” and
press Function (1). (See page 
33.)
Superimposing a Black Screen
Projector
Projected Image
sg
Displaying...

E-41
Operation Buttons
Magnifying a Specific Portion of an Image
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
You can only use these tools by accessing the “Button
Assign” list on your GyroRemote. Choose popup list “3/
5” and press Function (1) or (2). (See page
 33.)
1Press Function (2) to zoom in. (Press Function (1)
to zoom out.)
149163664
2To return to 1, press UNDO.
•If you press Function (1) when...

E-42
Operation Buttons
Adjusting the Picture Aspect Ratio
Projector
RESIZE
UNDO
This function allows you to modify or customize the picture display mode
to enhance the input image. Depending on the input signal, you can
choose NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or SMART
STRETCH image.
1Press RESIZE. Each time RESIZE is pressed, the picture mode
changes as shown below.
2To return to the standard image, press UNDO while “RESIZE” is
displayed on the screen.
You can use this tool by accessing the...

E-43
Operation Buttons
Gamma Correction Function
On-screen Display
(Example: RGB mode)
ss s
STANDARD
PRESENTATION
CINEMA
CUSTOM
Projector
GAMMA
UNDO
•Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.
•Four gamma settings are available to allow for
differences in the images displayed and in the
brightness of the room.
•When you are displaying images with frequent, dark
scenes,...

E-44
Basic Operation
Using the GUI (Graphical User Interface) Menu Screen
Basic Operations
This projector has two sets of menu screens that allow you to adjust the image and various projector
settings. These menu screens which appear on pages 
47 to  62 can be operated from the projector or
the GyroRemote with the following procedure.
 
1  Press MENU to display the INPUT 1, 2, 3, 4 or 5
mode menu bar.
2Press ß/© to select an adjustment menu on the
menu bar.
3Press ∂/ƒ to select a specific adjustment...

E-45
Basic Operation
[ON/OFF]
[ON/OFF]
PictureOptions (2)
Options (1) Fine Sync
AudioTint30 30
Color30 30
Sharp30 30
Contrast30 30
Bright30 30
Red30 30
Blue
Reset30 30
CLR Temp
Progressive Mode Signal Type3 3
Component RGB
2D Progressive
3D Progressive
Film Mode
Auto Sync Clock150 150
150 150
Auto Sync Disp[ON/OFF]
Phase60 60
H-Pos
V-Pos
Reset
Save Setting
Select Setting
Special Modes60 60
Signal Info1
2
•
•
7
Resolution800
600
640
480
1
2
•
•
7
Resolution
Vert Freq
75 Hz
72 Hz 1...

E-46
Basic Operation
Menu Bars
Items on the INPUT 4 or 5 Mode Menu Bar
Main menuSub menuMain menuSub menu
PictureOptions (2)
AudioTint30 30
Color30 30
Sharp30 30
Contrast30 30
Bright30 30
Red30 30
Blue
Reset30 30
CLR Temp
Progressive Mode3 32D Progressive
3D Progressive
FAO
VAO Audio Out
SpeakerFilm Mode
Economy Mode Background
[ON/OFF]Auto Power OffMNTR Out/RS232C
[ON/OFF]
Startup ImageTreble30 30
Balance30 30
Bass30 30
Reset
Sharp
Sharp Custom
Custom Blue
None
None Options (1)DNR...

E-47
Basic Operation
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings. See page
44 for the procedure details.
e. g. RGB input in INPUT 1 or 2 mode
ß button
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blueFor more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
©...

E-48
Basic Operation
Adjusting the Picture
Progressive Mode
This function allows you to select the progressive display of a video signal. The progressive display
projects a smoother video image. See page 
44 for the procedure details.
Selects the progressive conversion mode.
2D Progressive
This function is useful to display fast-moving images such
as sports and action films. Mode that optimizes the image
in a displayed frame.
3D Progressive
This function is useful to display relatively slow-moving
images...

E-49
Basic Operation
•Computer image adjustments can be made easily by pressing AUTO SYNC (). See page 51 for details.
•To reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and press ENTER.
Adjusting the Computer Images (RGB menu only)
When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference
may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions
of the screen. Should this occur,...