Sharp Xg P20xu Projector User Manual

E-10
Important
Information
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
38
35
13
17
38
18
4
4
70
56
16
16
14
14
15
65
17
17
16
39
67
44
51
42
43
44
70
3
44
32
19
67
39
21
39
37
40
44
20
52
67
20
32
Front View
Projector
MUTE buttonVOLUME buttons (/)
MENU button
ADJUSTMENT buttons
(∂/ƒ/ß/©) AUTO SYNC button
RESIZE button
GAMMA button
Foot releases POWER buttons (ON/OFF)
LENS button
ENTER button INPUT 1, 2, 3, 4, 5 buttons
LEARN button
BLACK SCREEN...

E-11
Important
Information
Battery
coverBattery
cover
39
33
32
35
32
33
36
35
4444
39
33
32
21
33
33
36
37
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
GyroRemote
Part Names
Front View
Inserting and removing the batteries
Batteries are not pre-installed at the factory. When inserting batteries for the first time, follow steps 1, 3 and 4
below.Rear View
Bottom View
Bottom View
Function
button (1)
INPUT button
LEFT-CLICK/
ENTER button
POWER button...

E-12
Important
InformationAccessories
ø2.5–ø3.5 mm wired remote
control cable
QCNW-5943CEZZ
Computer audio cable
(ø3.5 mm stereo minijack cable)
QCNW-4870CEZZ RGB cable
QCNW-5304CEZZUSB mouse control cable
QCNW-5916CEZZ
Three BNC-RCA adaptors
QPLGJ0107GEZZ
GyroRemote
RRMCG1631CESA
Power cord
QACCU5013DE01
Extra air filter
PFILD0080CEZZ
Lens cap
PCAPH1056CESA
Four AAA size batteries
Supplied Accessories
DVI cable (9 10, 3 m)
AN-C3DV
3RCA to 15pin D-sub cable (9 10, 3 m)
AN-C3CP
5BNC to 15pin D-sub...

E-13
Setup & Connections
Power Supply
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the rear of the projector.
Power cord
Make the necessary connections before proceeding. Connect the power cord to a wall outlet.
The POWER indicator lights up red and the projector enters standby mode.
Connections
POWER indicator
• If the bottom filter cover is not securely installed, the POWER indicator flashes. 

E-14
Setup & Connections
Projecting Computer Images
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images.
Connecting to a computer using the standard 15-pin Input
1Connect one end of the supplied RGB cable to the INPUT 1 port on the projector.
2Connect the other end to the monitor output port on the computer. Secure the connectors by tightening the
thumb screws.
3To use the built-in audio system, connect one end of the supplied...

E-15
Setup & Connections
Projecting Computer Images
•This projector uses a 5 BNC computer input to prevent deterioration of image quality.
•Connect the R (P
R), G/G sync (Y), B (PB), HD/C sync and VD cables (sold separately) to the correct input
terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5
BNC cable (sold separately) directly from the input terminals on the projector to the computer.
Connecting to an external RGB switcher or other compatible...

E-16
Setup & Connections
Projecting Computer Images
Connecting to a computer using the RS-232C Port
When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross
type, sold separately), the computer can be used to control the projector and check the status of the projector.
See pages
73, 74 and 75 for details.
Connect an RS-232C cable (null modem, cross type, sold separately) to the serial port on the computer.
RGB cable
Computer audio cable
RS-232C cable...

E-17
Setup & Connections
Watching Video  Images
Connecting to a VCR, laser disc player and other audiovisual
equipment using the standard video Input
S-video cable (sold separately)
Video cable (sold separately)
1
2
Audio cable (sold separately)To S-video output terminal
To video output terminal
    To audio output terminals
VCR
or
Laser disc playerExample
1Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and
the Video output terminal on the video...

E-18
Setup & Connections
Watching Component Video Images
Connecting to a DVD video player, DTV decoder and other component
video equipment using the 5 BNC Input
4 To audio output terminals
13
Three BNC-RCA adaptorsDTV decoder
or
DVD video player
Example
Audio cable
(ø3.5 mm stereo minijack/RCA cable,
sold separately)
2To analog component output terminals Component cable (sold separately)
CAUTION
•Always turn off the projector before connecting to video
equipment, in order to protect both the projector...

E-19
Setup & Connections
Power ON/OFF
Press POWER ON on the projector or
POWER on the GyroRemote.
Press POWER OFF on the projector or
POWER on the GyroRemote.
LAMP REPLACEMENT
indicator
POWER
•The flashing green LAMP REPLACEMENT indicator
shows that the lamp is warming up. Wait until the
indicator stops flashing before operating the projector.
•If the power is turned off and then immediately turned
on again, it may take a short while before the lamp
turns on.
•When the projector cannot recognize...