Sharp Xg Nv2u Projector User Manual

E-21
Basic Operation of the Projector
1 1. Connect the AC cord.
Connect the supplied AC cord to the AC inlet on
the back of the projector .
OFF ON
110-120V/
200-240V~
1 AC cord
2 2. Turn on the MAIN POWER.
Press the MAIN POWER switch on the back of the
projector. The POWER indicator lights red and the
projector enters STANDBY mode.ON OFFPOWER LAMP TEMP.
When the MAIN
POWER is on, the
POWER indicator
lights red.
Projector
ON/OFFRemote control
ON/OFF
ON
OFF
3
POWER LAMP TEMP.
When the power is on, the...

E-22
4. Select one of eight ON-SCREEN
DISPLAY languages.
You can return to the previous screen by se-
lecting the uppermost item (turquoise) with the
ADJUSTMENT Ä/¶ buttons (in this case, LAN-
GUAGE) and then pressing the ENTER button.
The on-screen display is set to English at the fac-
tory. The language for the unitÕs ON-SCREEN DIS-
PLAY can be set to English, German, Spanish,
Dutch, French, Italian, Swedish or Japanese.
Setting the ON-SCREEN DISPLAY language
1. Press the MENU button. The menu will...

E-23
POWER LAMP TEMP.
6. Select input.
Press the INPUT SELECT button on the projector to
switch the picture input. When you press the but-
ton, the current input mode is displayed for about 4
seconds. If you press the button again while the
input mode is displayed, the mode changes as
shown on the left.
Confirm the selected input terminal and press the
INPUT SELECT button.
Notes:
¥ The input can be selected directly using the VIDEO 1, VIDEO 2,
DATA 1 and DATA 2 buttons on the remote control. (When DATA 1...

E-24
Adjusting the Picture
¥ This projectorÕs picture is factory preset to standard
settings. However, you can adjust it to suit your own
preferences with the ADJUSTMENT buttons on the
projector and the remote control.
¥ The adjustments can be memorized in RGB 1, RGB 2,
VIDEO 1 or VIDEO 2 separately.
¥ Four picture modes can be adjusted: ÒPICTURE,Ó
ÒBRIGHT,Ó ÒRED,Ó  and ÒBLUE.Ó
Adjusting the Picture
1. Use the MENU button to select the mode
to be adjusted.
¥ When the MENU button is pressed, the MENU
mode...

E-25
¥ The projectorÕs audio is factory preset to the standard
setting. However, you can adjust it to suit your own
preference with the ADJUSTMENT buttons on the
projector or the remote control.
¥ You can adjust the BALANCE, TREBLE and BASS.
Adjusting the Audio
¥ To return to the factory preset mode, press the AD-
JUSTMENT Ä/¶ buttons to select ÒRESETÓ, then
press the ENTER button.
¥ Press the MENU button to select the normal screen
mode.
Adjusting the Audio
¥ Press the MENU button.
Select ÒAUDIOÓ with...

E-26
Functions on the Projector
Setting Up the System
Using this function, you can check the input signal and
lamp usage time, and select the remote mouse.
Checking the system and lamp usage time
¥ Press the MENU button. Select ÒSYSTEM SETUPÓ with the
ADJUSTMENT Ä/¶ buttons. Then press the ENTER button to
change to the picture indicated on the left.
¥ The current system conditions, including the lamp usage
time, will be displayed on the screen.
¥ Press the MENU button to select the normal screen mode....

E-27
Using the Black Screen Function
This projector is equipped with a Black Screen Function.
This function can be used to black out the presentation
image.
¥ Press the BLACK SCREEN button on the projector or the
remote control to display the black screen. Press the BLACK
SCREEN button again to return to the presentation image.
Note:
¥ When BLK SCRN DISP is set to OFF, the On-Screen Display (ÒBLACK
SCREENÓ) will not appear during black screen. See below.
LCD Projector
Black Screen On-Screen Display...

E-28
Using the Blue Screen Function
This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
is turned off.
¥ Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT Ä/¶ buttons to select ÒIMAGE
ADJ.Ó Then press the ENTER button to display the IMAGE
ADJ. screen as shown. Press the ADJUSTMENT Ä/¶ but-
tons to select ÒBLUE SCREEN,Ó and press the ADJUST-
MENT§/© buttons...

E-29
Air Filter Maintenance
Bottom Air Filter¥ The air filter should be cleaned every 100 hours of use. Clean the filter more
often when the projector is used in a dusty or smoky location.
¥ Have your nearest Authorized Sharp Industrial LCD Products Dealer or Ser-
vice Center exchange the filter  (PFILD0069CEZZ) when it is no longer pos-
sible to clean it.
Cleaning and Replacing the Filter
46
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into...

E-30
Lamp/Maintenance Indicators
Lamp
The lamp operating life differs, depending on the usage environment. It is recommended that the lamp be
replaced after 2,000 cumulative hours of use.
¥ When the lamp is nearing the end of its operating life, the picture and color quality will deteriorate. At this point, replace the
lamp. (See pages 31 and 32.)
Check
¥ The projector AC cord is not plugged into the AC wall outlet.
¥ The main power switch is not pressed.
¥ The input is wrong. (See pages 22 and 23.)
¥...