Sharp Xg Nv2u Projector User Manual
Have a look at the manual Sharp Xg Nv2u Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-21 Basic Operation of the Projector 1 1. Connect the AC cord. Connect the supplied AC cord to the AC inlet on the back of the projector . OFF ON 110-120V/ 200-240V~ 1 AC cord 2 2. Turn on the MAIN POWER. Press the MAIN POWER switch on the back of the projector. The POWER indicator lights red and the projector enters STANDBY mode.ON OFFPOWER LAMP TEMP. When the MAIN POWER is on, the POWER indicator lights red. Projector ON/OFFRemote control ON/OFF ON OFF 3 POWER LAMP TEMP. When the power is on, the LAMP REPLACEMENT indicator flashes to show the operating condition of the lamp. Green: Lamp is ready Flashing green: Warming up Red: Change bulb 3. Turn on the POWER. Press the POWER ON/OFF button on the projector or the POWER ON button on the remote control. ¥ When the power is turned off by pressing the POWER ON/OFF button, the POWER indicator will not turn off until the fan has stopped running. ¥ See page 30, ÒLamp/Maintenance IndicatorsÓ for details. Notes: ¥ When the POWER indicator is not lit, the remote control cannot be used to operate the projector. ¥ If the power is turned on immediately after it has been turned off, it may take a short while before the lamp turns on. (During this period the LAMP REPLACEMENT indicator flashes.) ¥ After the projector is unpacked and turned on for the first time, a slight odor may be emitted from the exhaust fan. This odor will soon disappear with use.
E-22 4. Select one of eight ON-SCREEN DISPLAY languages. You can return to the previous screen by se- lecting the uppermost item (turquoise) with the ADJUSTMENT Ä/¶ buttons (in this case, LAN- GUAGE) and then pressing the ENTER button. The on-screen display is set to English at the fac- tory. The language for the unitÕs ON-SCREEN DIS- PLAY can be set to English, German, Spanish, Dutch, French, Italian, Swedish or Japanese. Setting the ON-SCREEN DISPLAY language 1. Press the MENU button. The menu will appear on the screen. 2. Press the ADJUSTMENT Ä/¶ buttons to highlight the LANGUAGE item yellow. Then press the ENTER button to display the language menu. 3. Press the ADJUSTMENT Ä/¶ buttons to highlight the desired language yellow. Then press the ENTER button to set the language. The ON-SCREEN DIS- PLAY is now programmed to display in the language chosen. 5. Change the system mode. The video input system mode is set to AUTO at the factory, but it can be changed to a different mode if the selected system mode is not compatible with the connected audiovisual equipment (when a color image appears in black and white, etc.). 1. Press the MENU button. The menu will appear on the screen. 2. Press the ADJUSTMENT Ä/¶ buttons to highlight the ÒIMAGE ADJ.Ó yellow. Then press the ENTER button to display the IMAGE ADJ. 3. Press the ADJUSTMENT Ä/¶ buttons to highlight SYSTEM yellow. Then press the ENTER button to display the SYSTEM. 4. Press the ADJUSTMENT Ä/¶ buttons to highlight yellow the video system desired yellow. Then press the ENTER button to set the system. Notes: ¥ In AUTO mode, ÒPAL,Ó ÒSECAMÓ, ÒNTSC 4.43Ó or ÒNTSC 3.58Ó is displayed on the screen for a few seconds when the mode is changed with the INPUT SELECT button. ¥ When the system mode is set to AUTO, you may not receive a clear picture due to signal differences. If this happens, switch to the color system you are viewing. LANGUAGE :SEL.:ENTERENTER:ENDMENU NEDERLANDS ESPAÑOL DEUTSCH ENGLISH SVENSKA ITALIANO FRANÇAIS On-Screen Display :SEL.:NEXTENTER:ENDMENU BLUE SCREEN BLK SCRN DISP IMAGE ADJ. REVERSE INVERT INPUT DISPLAY[OFF] [OFF] [ OFF]SYSTEM [OFF] [ ON]AUTO SYSTEM PAL SECAM NTSC 4.43 NTSC 3.58 :SEL.:ENTERENTER:ENDMENU Þ
E-23 POWER LAMP TEMP. 6. Select input. Press the INPUT SELECT button on the projector to switch the picture input. When you press the but- ton, the current input mode is displayed for about 4 seconds. If you press the button again while the input mode is displayed, the mode changes as shown on the left. Confirm the selected input terminal and press the INPUT SELECT button. Notes: ¥ The input can be selected directly using the VIDEO 1, VIDEO 2, DATA 1 and DATA 2 buttons on the remote control. (When DATA 1 or DATA 2 is selected, the RGB 1 or RGB 2 screen will appear accordingly.) ¥ In VIDEO mode, the system being received will be indicated below the ÒVIDEOÓ display. ¥ When selecting RGB mode, the resolution being displayed will be indicated under ÒRGB,Ó as shown on the left. (Refer to the second example when connecting to Mac display.) ¥ When no signals are being received, ÒNO SIGNALÓ will be displayed. When receiving a signal the projector is not preset to receive, ÒNOT REG.Ó will be displayed. (This display function does not operate in Video mode.) ¥ The picture size differs in RGB, NTSC, PAL and SECAM INPUT modes. 7. Press INPUT CHECK. When the INPUT CHECK button on the remote con- trol is pressed, the current input mode is displayed for about 4 seconds. Note: ¥ The INPUT CHECK button will not function if the INPUT DISPLAY is turned off, as described on page 28. 8. Adjust the volume. Press the VOLUME UP-DOWN buttons on the pro- jector or on the remote control to adjust the volume. MUTE ¥ Press the MUTE button to temporarily turn off the sound. ¥ Press the MUTE button once again to turn the sound back on. 9. To turn off the power from the projector or remote control The power can be temporarily turned off by pressing the POWER ON/OFF button on either the projector or remote control. The POWER indicator will turn red and the cooling fan will run for 90 seconds, then the power will turn off, and the projector will return to STANDBY mode. The power can be turned on again either from the projector or remote control. When the power is turned on, the POWER indicator and LAMP REPLACEMENT indicator light green. Note: ¥ When the MAIN POWER is off on the projector set, the power cannot be turned on from the remote control. For viewing the picture from a video source connected to: VIDEO INPUT 1 COMPUTER RGB2 COMPUTER RGB1 VIDEO INPUT 2 Mac Mac On-Screen Display VOLUME 38 The number of displayed segments (0Ð60) increases or decreases as the volume is raised or lowered.
E-24 Adjusting the Picture ¥ This projectorÕs picture is factory preset to standard settings. However, you can adjust it to suit your own preferences with the ADJUSTMENT buttons on the projector and the remote control. ¥ The adjustments can be memorized in RGB 1, RGB 2, VIDEO 1 or VIDEO 2 separately. ¥ Four picture modes can be adjusted: ÒPICTURE,Ó ÒBRIGHT,Ó ÒRED,Ó and ÒBLUE.Ó Adjusting the Picture 1. Use the MENU button to select the mode to be adjusted. ¥ When the MENU button is pressed, the MENU mode is indicated for about 30 seconds. Press the ADJUSTMENT Ä/¶ buttons to select RGB 1 ADJ., then press the ENTER button. 2. Adjust the Picture ¥ Press the ADJUSTMENT Ä/¶ buttons to high- light yellow the picture adjustment item you want to adjust. ¥ Press the ADJUSTMENT §/© buttons to move the Ò Ó mark of the selected adjustment item to the desired setting. ¥ The adjustment mode is displayed for about 30 seconds. Description of Adjustment Items ADJUSTMENT § button For less contrast For less brightness For weaker red For weaker blue For less color intensity For less sharpnessSelected item PICTURE BRIGHT RED BLUE COLOR TINT SHARPNESS RESETADJUSTMENT © button For more contrast For more brightness For stronger red For stronger blue For more color intensity For more sharpness 1 RGB1 ADJ. RGB1 INPUT ADJ. IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE :SEL.:NEXTENTER:ENDMENU On-Screen Display RGB1 ADJ. BRIGHT RED BLUE RESET + 0 0 0 0 :SEL. :ADJ.:NEXTENTER:ENDMENU - + - + - + - PICTURE 2 All RGB Video Adjustment items are returned to the factory preset settings. Note: To reset all adjustment items, select RESET in ÒRGB 1 ADJ.Ó mode and press the ENTER button. 3. Display only the item to adjust. ¥ Press the ADJUSTMENT Ä/¶ buttons to high- light yellow the picture adjustment item you want to adjust. If you press the ENTER button at this time, only the selected item will be displayed. ¥ Press the ADJUSTMENT §/© buttons to move the Ò Ó mark of the selected adjustment item to the desired setting. ¥ The adjustment mode is displayed for about 30 seconds. Notes: ¥ When a VIDEO signal input has been selected, only ÒPICTURE,Ó ÒBRIGHT,Ó ÒCOLOR,Ó ÒTINTÓ and ÒSHARPNESSÓ can be adjusted. ¥ TINT only appears in NTSC 3.58 mode. 4. Press the MENU button anytime to exit RGB ADJ. + :SEL. :ADJ.:ENTERENTER:ENDMENU -PICTURE 0 3 Skin tones become purplishSkin tones become greenish
E-25 ¥ The projectorÕs audio is factory preset to the standard setting. However, you can adjust it to suit your own preference with the ADJUSTMENT buttons on the projector or the remote control. ¥ You can adjust the BALANCE, TREBLE and BASS. Adjusting the Audio ¥ To return to the factory preset mode, press the AD- JUSTMENT Ä/¶ buttons to select ÒRESETÓ, then press the ENTER button. ¥ Press the MENU button to select the normal screen mode. Adjusting the Audio ¥ Press the MENU button. Select ÒAUDIOÓ with the ADJUSTMENT Ä/¶ buttons. Then press the ENTER button to change to the picture indicated on the left. ¥ Select ÒBALANCE,Ó ÒTREBLEÓ or ÒBASSÓ with the AD- JUSTMENT Ä/¶ buttons. Adjust the mode you want with the ADJUSTMENT §/© buttons. ¥ To return to the factory preset mode, press the AD- JUSTMENT Ä/¶ buttons to select RESET, then press the ENTER button. Description of Adjustment Items ADJUSTMENT § button Increased audio from the left speaker Weaker treble Weaker bassADJUSTMENT © button Increased audio from the right speaker Stronger treble Stronger bass Selected items BALANCE TREBLE BASS AUDIO TREBLEBASSRESET 0 0 0 :SEL. :ADJ.:ENDMENU R L + - + - BALANCE On-Screen Display
E-26 Functions on the Projector Setting Up the System Using this function, you can check the input signal and lamp usage time, and select the remote mouse. Checking the system and lamp usage time ¥ Press the MENU button. Select ÒSYSTEM SETUPÓ with the ADJUSTMENT Ä/¶ buttons. Then press the ENTER button to change to the picture indicated on the left. ¥ The current system conditions, including the lamp usage time, will be displayed on the screen. ¥ Press the MENU button to select the normal screen mode. Note: ¥ In the video screen, the resolution and frequency settings will not be displayed. Selecting the Remote Mouse ¥ Separate settings can be selected for RGB 1 and RGB 2. ¥ Use the INPUT SELECT buttons to select DATA 1 (RGB 1) or DATA 2 (RGB 2). ¥ Press the MENU button. ¥ Select SYSTEM SETUP with the ADJUSTMENT Ä/¶ buttons. Then press the ENTER button. ¥ Select ÒREMOTE MOUSEÓ and then select either Ò[AT]Ó or Ò[98] Ówith the ADJUSTMENT §/© buttons. ¥ Select [AT] when using IBM compatibles and Apple Macintosh series. ¥ Select [98] when using NEC PC98 series (for Japan). ¥ Press the MENU button to select the normal screen mode. Background level ¥ The Background Level adjustment can be used to adjust the picture white balance for the selected Video Input Source. ¥ Optimal image quality can be achieved by adjusting the white portion of the picture to obtain the best color for the selected source. Adjusting the BACKGROUND LEVEL ¥ Press the MENU button. Select ÒBACKGRND LVLÓ with the ADJUSTMENT Ä/¶ buttons. Then press the ENTER button to change the picture as indicated on the left. ¥ Select ÒREDÓ or ÒBLUEÓ with the ADJUSTMENT Ä/¶ buttons. Adjust the mode you want with the ADJUSTMENT §/© buttons. ¥ To return to the factory preset mode, press the ADJUSTMENT Ä/¶ buttons to select ÒRESETÓ then press the ENTER button. ¥ Press the MENU button to select the normal screen mode. Note: ¥ To display only the item that you want to adjust, press the ENTER button after selecting the item with the ADJUSTMENT Ä/¶ buttons. Then adjust the item with the ADJUSTMENT §/© buttons. On-Screen Display SYSTEM SETUP RESOLUTION HOR FREQ VERT FREQ REMOTE MOUSE :SEL.:ENDMENU 800@600 [AT] :ADJ. 60Hz LAMP USAGE 1234H 37.9 KHz VIDEO1 ADJ. BACKGRND LVL IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE :SEL.:NEXTENTER:ENDMENU BACKGRND LVL RED BLUE RESET + 0 0 :SEL. :ADJ.:NEXTENTER:ENDMENU - + - SYSTEM SETUP RESOLUTION HOR FREQ VERT FREQ REMOTE MOUSE :SEL.:ENDMENU 800@600 [AT] :ADJ. 60Hz LAMP USAGE 1234H 37.9 KHz
E-27 Using the Black Screen Function This projector is equipped with a Black Screen Function. This function can be used to black out the presentation image. ¥ Press the BLACK SCREEN button on the projector or the remote control to display the black screen. Press the BLACK SCREEN button again to return to the presentation image. Note: ¥ When BLK SCRN DISP is set to OFF, the On-Screen Display (ÒBLACK SCREENÓ) will not appear during black screen. See below. LCD Projector Black Screen On-Screen Display override The On-Screen Display (ÒBLACK SCREENÓ) that appears during black screen can be turned off. When BLK SCRN DISP is set to OFF, the On-Screen Display will not appear during black screen. ¥ Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT Ä/¶ buttons to select ÒIMAGE ADJ.Ó Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT Ä/¶ but- tons to select ÒBLK SCRN DISPÓ and press the ADJUST- MENT §/© buttons to select ON or OFF. BLK SCRN DISP IMAGE ADJ. REVERSE INVERT INPUT DISPLAY :SEL. :ADJ.:ENDMENU [OFF] [ OFF] [OFF] [ ON] On-Screen DisplayBLACK SCREEN
E-28 Using the Blue Screen Function This projector is equipped with a Blue Screen function that will turn the screen blue when the video input termi- nal is not connected to anything, or the video component is turned off. ¥ Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT Ä/¶ buttons to select ÒIMAGE ADJ.Ó Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT Ä/¶ but- tons to select ÒBLUE SCREEN,Ó and press the ADJUST- MENT§/© buttons to select ON or OFF. Press the MENU button to return to the normal screen. ¥ When the Blue Screen function is on, the screen will turn blue when no video signal is being input through the video input terminal. ¥ When the Blue Screen function is on, and no video signal is input via the input terminal for more than 15 minutes, the power is automatically turned off. ¥ The indicators appear as shown each minute before the power is turned off, from five minutes before until one minute before. Notes: ¥ The Blue Screen Function does not operate in RGB mode. ¥ When the power is turned off, the POWER indicator will light red. ¥ To turn the power on again, press the POWER button to set it to OFF, then press it again to set it to ON. On-Screen Display Using the Input Mode On-Screen Display Override Function The On-Screen Displays that appear during input select (ÒRGB 1,024 2 768, 75 Hz,Ó etc.) can be turned off. Once INPUT DISPLAY is turned off, the On-Screen Dis- plays will not appear even if the INPUT CHECK button on the remote control is pressed. ¥ Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT Ä/¶ buttons to select ÒIMAGE ADJ.Ó Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT Ä/¶ but- tons to select ÒINPUT DISPLAY,Ó and press ADJUST- MENT§/© buttons to select ON or OFF. ¥ When OFF is selected, the On-Screen Display (ÒRGB 1,0242 768, 75 Hz,Ó etc.) will not be displayed during input select. BLUE SCREEN BLK SCRN DISP IMAGE ADJ. REVERSE INVERT INPUT DISPLAY[OFF] [OFF] [ OFF]SYSTEM [OFF] [ ON] :SEL. :ADJ.:ENDMENU REMAIN 5M REMAIN 4M REMAIN 1M BLK SCRN DISP IMAGE ADJ. REVERSE INVERT INPUT DISPLAY :SEL. :ADJ.:ENDMENU [OFF] [ OFF] [OFF] [ OFF]
E-29 Air Filter Maintenance Bottom Air Filter¥ The air filter should be cleaned every 100 hours of use. Clean the filter more often when the projector is used in a dusty or smoky location. ¥ Have your nearest Authorized Sharp Industrial LCD Products Dealer or Ser- vice Center exchange the filter (PFILD0069CEZZ) when it is no longer pos- sible to clean it. Cleaning and Replacing the Filter 46 Insert the tab on the end of the filter cover into the filter cover opening and press the filter cover into position. Place the filter underneath the tabs on the filter frame. Return the air filter to its original position in the filter cover opening. Clean the dust off the air filter and cover with a vacuum cleaner extension hose. Clean the AIR FILTER.5Replace the AIR FILTER.Replace the FILTER COVER. 13 Turn OFF the MAIN POWER. 2 Remove the FILTER COVER.Remove the AIR FILTER. Grasp the air filter between your fingers and lift it out of the filter cover.Press the tab in the direction of the arrow and lift open the filter cover. Ta b Open POWER indicator goes off. Unplug the power cord. AIR FILTER cover Note: ¥ Be sure the AIR FILTER COVER is securely installed. The power cannot be turned on unless it is correctly installed. Press ON OFF
E-30 Lamp/Maintenance Indicators Lamp The lamp operating life differs, depending on the usage environment. It is recommended that the lamp be replaced after 2,000 cumulative hours of use. ¥ When the lamp is nearing the end of its operating life, the picture and color quality will deteriorate. At this point, replace the lamp. (See pages 31 and 32.) Check ¥ The projector AC cord is not plugged into the AC wall outlet. ¥ The main power switch is not pressed. ¥ The input is wrong. (See pages 22 and 23.) ¥ Cables improperly connected to rear panel of the projector. (See pages 14, 15, 16 and 17.) ¥ Remote control batteries have run down. (See page 7.) ¥ The optional cable for the remote control is improperly inserted. ¥ The main power of the remote control is not turned on. ¥ The remote controlÕs MOUSE/ADJUSTMENT switch is set to MOUSE. ¥ Cables improperly connected to rear panel of the projector. (See pages 14, 15, 16 and 17.) ¥ The BRIGHTNESS and PICTURE adjustments are set to minimum position. (See page 24.) ¥ On-Screen Display (ÒBLACK SCREENÓ) is turned off and Black Screen function is turned on, creating a black image. (See page 27.) ¥ The COLOR and TINT adjustments are not correct. (See page 24.) ¥ Adjust the focus. (See page 9.) ¥ The projection distance is too long or too short to allow for proper focus. (See page 10.) ¥ Cables improperly connected to rear panel of the projector. (See pages 14, 15, 16 and 17.) ¥ Volume is set to minimum. (See page 23.) ¥ If the picture is normal, the sound is due to cabinet shrinkage caused by temperature changes. This will not affect operation or performance. ¥ Refer to ÒLamp/Maintenance IndicatorsÓ on page 30.Problem No picture and no sound. Sound is heard but no picture appears. Color is faded or poor. Picture is blurred. Picture appears but no sound is heard. An unusual sound is occasionally heard from the cabinet. Maintenance indicator lights up. Notes: ¥ If the TEMPERATURE indicator comes on, follow the above possible solutions and then wait until the projector has cooled down completely before turning the power back on. (At least 5 minutes.) ¥ When the power is turned off and then turned on again, as during a brief rest, the LAMP REPLACEMENT indicator may be triggered, pre- venting the power from going on. When this happens, take the power plug out of the AC outlet and put it back in again. Before Calling for Service Problem ¥ Blocked air intake. ¥ Clogged air filter. ¥ Cooling fan breakdown. ¥ Internal circuit failure. ¥ Burnt-out lamp. ¥ Lamp circuit failure.Warning Indicator The internal temperature is abnormally high. TEMPERATURE indicator LAMP REPLACE- MENT indicatorThe lamp does not light up.Symptom Possible Solution ¥ Relocate projector to a proper location. ¥ Clean the filter. (See page 29.) ¥ Take the projector to your nearest Autho- rized Sharp Industrial LCD Products Dealer or Service Center for repair. ¥ Carefully replace the lamp. ¥ Take the projector to your nearest Autho- rized Sharp Industrial LCD Products Dealer or Service Center for repair. ¥ The warning lights on the projector indicate problems inside the projector. ¥ There are two warning lights: a TEMPERATURE indicator which warns that the projector is too hot, and a LAMP REPLACEMENT indicator which lets you know when to change the lamp. ¥ If a problem occurs, either the TEMPERATURE indicator or the LAMP REPLACEMENT indicator will light up red, and the power will shut off. After turning off the power, follow the procedures given below. POWER LAMP TEMP. LAMP REPLACEMENT indicatorTEMPERATURE indicator Maintenance Indicators Note: The lamp usage time can be checked with the On-Screen display. (See page 26.) ¥ If the new lamp does not light after replacement, take your projector to the nearest Authorized Sharp Industrial LCD Products Dealer or Service Center for repair. ¥ Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.