Sharp Xg Mb70x Projector User Manual
Have a look at the manual Sharp Xg Mb70x Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
-47 Useful Features Signal Type Setting This function allows you to select the input sig- nal type RGB or Component for INPUT 1 or IN- PUT 2. Menu operation Page 42 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Signal Type Settings Description Input signals are automatically recog- nized as RGB or Component. Set when RGB signals are received. Set when Component signals are received. Selectable items Auto RGB Component XG-MB70X_E_P40_49.p652004.8.6, 0:00 PM 47
-48 You can adjust the computer image, match the computer display mode, and confirm the input signal using the “Fine Sync” menu. Computer Image Adjustment (“Fine Sync” menu) Adjusting the Computer Image Use the Fine Sync function in case of irregulari- ties such as vertical stripes or flickering in por- tions of the screen. Menu operation Page 40 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Adjustment Items Note •You can automatically adjust the computer im- age by setting “Auto Sync” on the “Fine Sync” menu to “ ” (ON) or pressing on the pro- jector or on the remote control. See next page for details. •To reset all adjustment items, select “Reset” and press . Special Modes Setting Ordinarily, the type of input signal is detected and the correct resolution mode is automatically se- lected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer display mode. Menu operation Page 42 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Note •If your computer displays patterns which repeat every other line (horizontal stripes), flickering may occur which makes the image hard to see. •See “Checking the Input Signal” on the next page for information on the currently selected input signal. Selectable items Clock Phase H-Pos V- Po s Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centers the on-screen image by moving it to the left or right. Centers the on-screen image by moving it up or down. XG-MB70X_E_P40_49.p652004.8.6, 0:00 PM 48
-49 Useful Features Auto Sync Adjustment Used to automatically adjust a computer image. Menu operation Page 42 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Auto Sync Adjustment Note •Auto Sync adjustment is also performed by pressing on the projector or on the re- mote control. •The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. •When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 31.) Checking the Input Signal Menu operation Page 42 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Note •The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video. •The projector will display the resolution when connecting the computer.Selectable items (ON) (OFF) Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automati- cally performed. XG-MB70X_E_P40_49.p652004.8.6, 0:00 PM 49
-50 You can use the “Options1” menu to enhance the usage for the projector. Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of Lamp Life Note •It is recommended that the lamp be changed when the remaining lamp life becomes 5%. •The table above indicates rough estimates in the case of using only in each mode shown. •Remaining lamp life changes within the range of the values shown depending on the frequency at which “Eco Mode” is switched to “ ” (Eco mode) and “ ” (Standard mode). (See page 52.) •The lamp life may vary depending on the usage condition. Using the “Options1” Menu Lamp usage condition “Life” Operated exclusively in Eco mode ( ) Operated exclusively in Standard mode ( ) Remaining lamp life 100% 5% Approx. Approx. 3,000 hours 150 hours Approx. Approx. 2,000 hours 100 hours Setting the Resize Mode Depending on the input signal, you can select the screen image. Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Selectable items of Resize Modes •Normal •Dot By Dot* •Border •Stretch *Item when inputting RGB signal through INPUT 1 or INPUT 2 Note •For details of the Resize mode, see pages 36 and 37. •You can also press on the remote control to set the resize mode. (See page 36.) XG-MB70X_E_P50_62.p652004.8.6, 0:00 PM 50
-51 Useful Features Setting the Video System The video input system mode is factory preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal. Menu operation Page 42 Example: “Options1” screen menu for INPUT 3 (Video) mode Description of Video Systems Note •The video signal can only be set in INPUT 3 or INPUT 4 mode. •When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. DescriptionWhen connected to PAL video equipment. When connected to SECAM video equipment. When reproducing NTSC signals in PALvideo equipment. When connected to NTSC video equipment. Selectable itemsPA L SECAM NTSC4.43 NTSC3.58 Setting On-screen Display This function allows you to turn the on-screen messages on or off. Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of “OSD Display” Settings Description All On-screen Displays are displayed. •INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/ENLARGE/ “An invalid button has been pressed.” are not displayed. •“All buttons on Projector are locked.” is displayed when the STANDBY button is pressed while the Keylock function is active. Selectable items (ON) (OFF) XG-MB70X_E_P50_62.p652004.8.6, 0:00 PM 51
-52 Eco Mode Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of Eco Mode Note •When “Eco Mode” is set to “” (ON), the power consumption will decrease and the lamp life will extend. (Projection brightness decreases 13%.) Brightness 87% 100% Selectable items (Eco mode) (Standard mode) Power consumption (When using AC 100V) 320 W 370 WLamp lifeApprox. 3,000 hours Approx. 2,000 hours Selecting a Startup and Background Image Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of Background Images Note *If the input signal has interference, the screen will be displayed during interference. Selectable items Logo Blue NoneDescription SHARP default image Blue screen Black screen* Using the “Options1” Menu XG-MB70X_E_P50_62.p652004.8.6, 0:01 PM 52
-53 Useful Features Auto Power Off Function Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of Auto Power Off Note •When the Auto Power Off function is set to “” (ON), 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes. Description The projector automatically enters the standby mode when no input signal is detected for 15 minutes or longer. The Auto Power Off function will be disabled. Selectable items (ON) (OFF) Selecting the Menu Screen Position Select “Menu Position” on the “Options1” menu and the desired position for the menu screen. Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Description of Menu Positions Description Displayed on the center of the image. Displayed on the upper right of the image.Displayed on the lower right of the image. Displayed on the upper left of the image. Displayed on the lower left of the image. Selectable items Center Upper Right Lower Right Upper Left Lower Left XG-MB70X_E_P50_62.p652004.8.6, 0:01 PM 53
-54 Note •If you input a wrong keycode, the cursor returns to the first point of the “Old Code”. •The preset keycode is 4 " buttons on the projec- tor. If this keycode is set, the keycode input screen does not appear when turning the power on. 3Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”. Note •You cannot use the following buttons for keycode: •ON button •STANDBY button •L-CLICK/ENTER button •R-CLICK/UNDO button •MENU button •AUTO FOCUS button •ZOOM/FOCUS button •ZOOM buttons •FOCUS buttons •System Lock function recognizes each but- ton on the remote control or on the projec- tor as an individual button, even if they share the same button name. If you set the keycode with the buttons on the projector, use only those buttons on the projector. If you set the keycode with the buttons on the remote con- trol, use only those buttons on the remote control. 4Enter the same keycode in “Reconfirm”. Note Not displaying the keycode input screen when turning the projector on •Press " on the projector for four times in steps 2 and 3 above. When the System Lock is set •When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be projected even when signals are entered to the projector. System Lock Function This function prevents unauthorized use of the pro- jector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access. Info •If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Ser- vice Center (see page 72). Even if the product war- ranty is valid, the keycode reset will incur a charge. Menu operation Page 42 Example: “Options1” screen menu for INPUT 1 (RGB) mode Setting the keycode 1Select “System Lock” on the “Op- tions1” menu, then press . •A message is displayed. •Read this message, and press . 2Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”. •When setting the keycode for the first time, press " on the projector for four times. " On-screen Display Using the “Options1” Menu XG-MB70X_E_P50_62.p652004.8.6, 0:01 PM 54
-55 Useful Features Changing the keycode 1Press the buttons on the remote control or on the projector to enter the preset keycode in “Old Code”. 2Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New code”. 3Enter the same keycode in “Recon- firm”. Note •If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press . When System Lock is set If you have set the system lock, enter the keycode and follow the procedure below to release the system lock. ▼Input screen for keycode Note •When System Lock is set, the keycode input screen appears after the power is turned on. •If no keycode is entered, the image will not be displayed, even if the projector receives the in- put signal. 1Press on the remote control or on the projector to turn on the projector. 2When the keycode input screen ap- pears, enter the right keycode to start projection. Note •System Lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you set the keycode with the buttons on the projector, use only those buttons on the projector. If you set the keycode with the buttons on the remote control, use only those buttons on the remote control. Keylock Function Use this function to lock the operation buttons on the projector. ■Locking the Operation Buttons Hold down on the projector for about 3 seconds while the projector is being turned on. •The keylock function does not affect the operation with the re- mote control buttons. • You cannot use the keylock function while the projector is warming up. ■ Taking the Keylock off Hold down on the projector for about 3 seconds. •When the projector is in standby mode, you can release the keylock by holding down on the projector for about 3 sec- onds. " "" " "On-screen Display" "" " "On-screen Display XG-MB70X_E_P50_62.p652004.8.6, 0:01 PM 55
-56 Helpful Functions Set during Installation (“Options2” menu) Setting a Password • •• • •There is no factory preset for the password, so the Options2 menu is enabled. • •• • •If you do not want others to operate the Op- tions2 menu, set a password. Menu operation Page 42 Example: “Options2” screen menu 1Select Password from the Op- tions2 menu, and press . •The screen for entering the password is displayed. 2Press ' '' ' ' or " "" " " to set the first digit in “New Password” and then press | || | |. 3Enter the remaining 3 digits and press . 4Enter the same password in “Re- confirm” and press . Note •The password must be entered to use the “Op- tions2” menu when a password has been set. Changing the Password 1Press ' '' ' ', " "" " " and | || | | to enter the password in “Old Password” and press . 2Press ' '' ' ', " "" " " and | || | | to set the new password in “New Password” and press . 3Enter the same 4-digit password in “Reconfirm” and press . Note •If you do not want to set a password, leave the fields blank in steps 2 and 3 and press . •To cancel the password settings, press . If You Forget Your Password If you forget the password, delete it using the fol- lowing procedure and set a new password. Note •If is held down for more than 3 seconds, the op- eration buttons on the projector will be locked. (See page 55.) •You can only use the buttons on the projector to de- lete the password. Press . XG-MB70X_E_P50_62.p652004.8.6, 0:01 PM 56