Sharp Xg Mb70x Projector User Manual

-7
Introduction
Ensure that you read the following safeguards when
setting up your projector.
Caution concerning the lamp unit
■Potential hazard of glass
particles if lamp ruptures.
In case of lamp rupture,
contact your nearest
Sharp Authorized Projec-
tor Dealer or Service
Center for a replacement.
See “Replacing the Lamp” on page 66.
Caution concerning the setup of the pro-
jector
■For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area...

-8
Info
•The cooling fan regulates the internal tem-
perature, and its performance is automati-
cally controlled. The sound of the fan may
change during projector operation due to
changes in the fan speed. This does not
indicate malfunction.
•Do not unplug the power cord during pro-
jection or cooling fan operation. This can
cause damage due to rise in internal tem-
perature, as the cooling fan also stops.
IMPORTANT SAFEGUARDS
Caution regarding usage of the projector
■When using the projector, ensure not...

-9
Introduction
PDF operation manuals in several languages are included in the CD-ROM, so that you can
work with the projector. To utilize these manuals, you need to install Adobe® Reader® on your
computer (Windows® or Macintosh®).
Please download Adobe
® Reader® from the Internet (http://www.adobe.com).
Accessing the PDF Manuals
For Windows®:
1Insert the CD-ROM in the CD-ROM drive.
2Double click the “My Computer” icon.
3Double click the “CD-ROM” drive.
4
When you want to view the operation manual
1)...

-10
Accessories
Remote control
RRMCGA313WJSA
Two R-03 batteries
(“AAA” size, UM/SUM-4, HP-16 or similar)
Power cord
*
For U.S., Canada, etc.
(6 (1.8 m))
QACCDA010WJPZFor Europe, except U.K.
(6 (1.8 m))
QACCVA011WJPZ
*Use the power cord that corresponds to the wall outlet in your country.
■3 RCA to 15-pin D-sub cable (910 (3.0 m)) AN-C3CP
■DIN-D-sub RS-232C adaptor (5 
57/64 (15 cm)) AN-A1RS
■Lamp unit AN-MB70LP
Note
•Some of the optional accessories may not be available depending on the region. Please...

-11
Introduction
30
30
40MENU buttonFor displaying adjustment 
and setting screens.
Auto focus sensorAuto focus may not function 
normally if there is an 
obstruction between the auto 
focus sensor and the screen, 
or if there is dirt or dust on the 
auto focus sensor. Remove 
any obstructions, dirt or dust.
49AUTO SYNC buttonFor automatically 
adjusting images when 
connected to a computer.
40ENTER buttonFor setting items selected 
or adjusted on the menu.
31KEYSTONE buttonFor entering the Keystone...

-12
About the Indicators on the Projector
Power indicator
Red on ...
 Normal (Standby)
Green on ...
 Normal (Power on)
Temperature warning indicator
Off ...
 Normal
Red on ...
The internal temperature is abnormally high. 
(See page 64.)
Lamp indicator
Green on ...
 Normal
Green blinks ...
 
The lamp is warming up or shutting down.
Red on ...
 The lamp has been shut down abnormally or 
needs to be changed. (See page 64.)
When Attaching the “QUICK GUIDE” Label“QUICK GUIDE”
Label
Attaching the “QUICK GUIDE”...

-13
Introduction
Projector (Rear View)
Using the Kensington Lock
•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Numbers in  refer to the main pages in this operation manual where the topic is explained.
INPUT 1 terminalTerminal for computer RGB 
and component signals.
30Rear adjustment feet
63Intake vent
INPUT 2 terminalTerminal...

-14
Note
•All the buttons on the remote control, except the MOUSE/Adjustment button, are made of luminous
material that is visible in the dark. Visibility will diminish over time. Exposure to light will recharge the
luminous buttons.
Remote Control
29STANDBY buttonFor putting the projector into  
standby mode.
32ZOOM buttonsFor adjusting the projected 
image size.
31KEYSTONE buttonFor entering the Keystone 
Correction mode.
L-CLICK/ENTER button• For the Left click when 
connecting the projector 
USB...

-15
IntroductionUsing the Remote Control
Inserting the Batteries
The batteries (two R-03 batteries (“AAA”
size, UM/SUM-4, HP-16 or similar)) are sup-
plied in the package.
1Press the ▲ mark on the cover and
slide it in the direction of the arrow.
2Insert the batteries.
•Insert the batteries making sure the po-
larities correctly match the 
 and 
marks inside the battery compartment.
3Attach the cover and slide it un-
til it clicks into place.
Incorrect use of the batteries may cause them to leak or...

-16
Quick Start
 	



 
 
 



 
   	

 
 

 
 
  !'"\|
 
 
#$%&$ 

 
Page 19
1.Place the projector facing a screen
Pages 23, 29
Page 29
On the remote control On the projector This section shows the basic operation (projector connecting with the computer). For details, see the page
described below for each step.
Setup and...