Sharp Xg F260x Projector User Manual

37
Useful
Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press  MENU/HELP .•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for COMPUTER (RGB) input
Press Q or  O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0 0
0
0
0
BrightRedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. ENTER END...

38
Using the Menu Screen (Continued)
Press P or  R and select “Bright”
to adjust.
• The selected item is highlighted.
•P ress  ENTER  again to return to the pre-
vious screen.
Press  O or  Q to adjust the item
selected.
• The adjustment is stored.
Press  MENU/HELP .•The menu screen will disappear.
3
4
5
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
15
Bright
Picture Mode
Contrast 0
0
0
0
RedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. Single ADJ END
Picture SCR - ADJ PRJ - ADJ Help...

39
Useful
Features
Picture Adjustment (“Picture” Menu)
Standard
Presentation
Movie
Game
*sRGB
Q Example: “Picture” screen menu for
COMPUTER (RGB) input Q
Example: “Picture” screen menu for
S-VIDEO input
Picture Mode
Contrast 0 0
0
0
0
BrightRedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the...

40
4
4 4
4
4  Progressive
•In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be selected.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second....

41
Useful
Features
Adjusting the Projected Image
(“SCR - ADJ” Menu)
Resize
Image Shift 0
0
KeystoneOSD Display
Background
Setup Guide
PRJ Mode
Language Front
English On Logo
On Border
SEL./ADJ. ENTER END
Picture
SCR - ADJ PRJ - ADJ Help
87654321
1
1 1
1
1  Setting the Resize Mode
•For details of the Resize mode, see pages  30
and  31.
•Y ou can also press  RESIZE on the remote con-
trol to set the resize mode. (See page  30.)
Note
2
2 2
2
2 Adjusting the Image
P osition
You can move the projected image...

42
The projector can switch the on-screen display
language among 15 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear Description
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
6
6 6
6
6 Selecting the Setup
Guide
8
8 8
8
8Selecting the On-screen
Display Language
Selectable...

43
Useful
Features
Adjusting the Projector Function (“PRJ - ADJ” Menu)
Auto Power Off
System Sound
System Lock
hOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100% Picture SCR - ADJ
PRJ - ADJHelp
SEL./ADJ. ENTER END
Speaker On
Audio Input Audio 1RS-232C 9600 bpsFan Mode NormalDisable
Menu operation 
n Page  37
•When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to...

44
Info
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.
•If you lose or forget your keycode, contact
your nearest Sharp Authorized Projector
Dealer or Service Center (see page  64). Even
if the product warranty is valid, the keycode
r eset will incur a charge.
Press the 4 buttons on the remote...

45
Useful
Features
Note
Input screen for keycode
To
 cancel the keycode that you have already
set
•P ress  R on the projector for four times in steps
3 and 4 above.
When the System Lock is set• When System Lock is set, the keycode input
screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.
Enter the same keycode in “Re-
confirm”.
•Y ou cannot use the following buttons for
keycode:
•
  STANDBY/ON• ON
•  STANDBY• ENTER
• L-CLICK
• R-CLICK/RETURN
•...

46
Troubleshooting with the “Help” Menu
Utilizing the “Help” Menu
Functions
This function advises you to solve the problems during usage.
•Y ou can adjust the items with check marks ( ✔).
• The items in the “Help” menu change, de-
pending on the input signal or setting that you
have selected.
• If the problem is not solved, refer to
“Troubleshooting” (see pages  62 and  63).
• When selecting “sRGB” in Picture Mode”, the
item “Color is faded or poor” is not displayed.
This means you cannot change input...