Sharp Xg F260x Projector User Manual

27
Basic
Operation
3 Adjusting the Height
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.
1
2
3
• Do not apply too much pressure on the pro-
jector when the front adjustment foot comes
out.
• When lowering the projector, be careful not to
get your fingers caught in the area between
the adjustment foot and the projector.
•
Hold the...

28
0
KEYSTONEADJUST END
Correcting Trapezoidal
Distortion
When the image is projected either from
the top or from the bottom towards the
screen at an angle, the image becomes
distorted trapezoidally. The function for
correcting trapezoidal distortion is
called Keystone Correction.
• The Keystone Correction can be adjusted up
to an angle of approximately ±20 degrees and
the screen can also be set up to an angle of
approximately ±20 degrees (when the resize
mode is set to “NORMAL” (see page  30)).
Note
1...

29
Basic
Operation
Displaying the Black Screen
and Turning off the Sound
T emporarily
Adjusting the Volume
Switching the Input Mode
Press  COMPUTER , DVI , S-VIDEO  or
VIDEO  on the remote control to select
the input mode.
• When you press  INPUT on the projector or  DVI
on the remote control, the INPUT list appears.
Press  P/R  to switch the INPUT mode.
Select the appropriate input mode for
the connected equipment.
Press  VOL +/–  on the remote control or
– O /Q + on the projector to adjust the vol-...

30
Image Projection (Continued)
Resize Mode
This function allows you to modify or customize the resize mode to enhan\
ce the input image. De-
pending on the input signal, you can choose “NORMAL”, “BORDER”\
 or “STRETCH” image.
Press RESIZE .•See page 41 for setting on menu screen.
Computer
RESIZE button
*Mode for projecting an image with the original aspect ratio without cutting any por\
tions.
: Cutout area on which images cannot be projected.
* *
*
Input Signal NORMALOutput screen image
Computer Image...

31
Basic
Operation
* *
*
*
*
* **
VIDEO
•
“STRETCH” is fixed when 540P, 720P, 1035 I or 1080 I signals are entered.
Input Signal
D VD / Video Image type Output screen image
NORMAL BORDERSTRETCH
480 I, 480P, 576 I,
576P, NTSC, PAL,
SECAM
540P, 720P, 1035 I,
1080 I
4:3 aspect ratio
Letter box
Squeezed 16:9 image
Squeezed 4:3 image 16:9 aspect ratio1
6:9 aspect ratio
(4:3 aspect ratio in 16:9)
* Mode for projecting an image with the original aspect ratio without cutting any por\
tions.
: Cutout area on...

32
Operating with the Remote Control
Displaying and Setting the
Break Timer
Press BREAK TIMER .•The timer starts to count down from 5
minutes.1
2
Press  P/R /O /Q  to adjust the
length of the break time.
• Increases with  P or  Q
5 minutes  s 6 minutes  s 60 minutes•Shortens with  O or  R4 minutes  s 3 minutes  s1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press  BREAK TIMER .
•Break Timer does not function...

33
Useful
Features
Auto Sync
(Auto Sync Adjustment)
Freezing a Moving Image
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page  46.)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
Press  AUTO SYNC  to manually adjust
with Auto Sync function.
Press  FREEZE .
•The projected image is frozen.
Press  FREEZE  again to return to
the moving image from the cur-
rently connected device.
1
2
Note
Selecting...

34
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can\
 use
the remote control as the computer mouse.
If the computer is placed too far away from the projector to be connecte\
d via the
USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate
the projector with the remote control.  For details, see the operation m\
anual of
the receiver.
Connecting with a USB cable
or
Remote receiver 
(optional, AN-MR2)To...

35
Useful
Features
The following shows the items that can be set in the projector.
Menu Items
“Screen adjustment (SCR-ADJ)” menu
COMPUTER (Component),
D VI (Component), S-VIDEO, VIDEO input
“Picture” menu
Picture Mode
Contrast 0 0
0
0
0
BrightRedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
0
Sharp
1CLR TempBright Boost
Progressive 3D Progressive Standard
Reset
SEL./ADJ. ENTER END
Picture...

36
“Projector adjustment (PRJ-ADJ)” menu
Auto Power Off
System Sound
System LockhOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100% Picture SCR - ADJ
PRJ - ADJHelp
SEL./ADJ. ENTER END
Speaker On
Audio Input Audio 1RS-232C 9600bpsFan Mode Normal
Disable
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
Picture SCR -...