Sharp Xg C330x Projector Quickstart Guide

-41
Communication cannot be established with the projector
When connecting the projector using serial-connection
\Check that the RS-232C terminal of the projector and a computer or the commercially
available controller are connected correctly.
\Check that the RS-232C cable is a cross-over cable.
\Check that the RS-232C port setting for the projector corresponds to the setting for the
computer or the commercially available controller.
When connecting the projector to a computer using network (LAN)-...

-42
Troubleshooting
\Take the following steps for checking the network settings for the computer.
1. Open a command prompt (MS-DOS Prompt).
•In the case of Windows
® 98 or 98SE: click “START” ➔ “Programs” ➔ “MS-DOS Prompt” in
order.
•In the case of Windows
® Me: click “START” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS
Prompt” in order.
•In the case of Windows
® 2000: click “START” ➔ “Programs” ➔ “Accessories” ➔ “Command
Prompt” in order.
•In the case of Windows
® XP: click “START” ➔ “All Programs” ➔...

-43
\Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also, check
if an IP address is set.
1. Open a command prompt (MS-DOS Prompt).
•In the case of Windows
® 98 or 98SE: click “START”  ➔ “Programs”  ➔ “MS-DOS Prompt” in
order.
• In the case of Windows
® Me: click “START”  ➔ “Programs”  ➔ “Accessories”  ➔ “MS-DOS
Prompt” in order.
• In the case of Windows
® 2000: click “START”  ➔ “Programs”  ➔ “Accessories”  ➔ “Command
Prompt” in order.
• In the case of Windows
® XP: click...

-44
Dimensions
Units: inches (mm)
Side ViewSide ViewTop View
Rear View
Front View
Bottom View
11 1/64 (279.5)
17/64 (6.5)
1/4 (6)
12 27/32 (326)
3 31/64 (88.5)
2 
15/16(74.5)
5 53/64 (148) 5 53/64 (148)
4 (101.5)
1 
31/32
(50) 3 
1/64 (76.5)
63/64(25)
2 61/64(75)
5 25/32 (146.5)
9 
9/32 (235.5)
10 37/64 (268.5)
1 5/64(27.25)2 
29/32(73.5) 

-45
Dimensions
Projector and Lens Dimensions
[When AN-C12MZ is installed]
Unit : inches (mm) 
15 21/64 - 15 13/32 (389 - 391)
107
[When AN-C18MZ is installed]
Unit : inches (mm)
 12 3/32 - 12 11/64 (307 - 309)
67.5
[When AN-C27MZ is installed]
Unit : inches (mm) 
13 7/16 - 13 5/8 (341 - 346)
80
[When AN-C41MZ is installed]
Unit : inches (mm) 
13 19/32 - 13 3/4 (345 - 349)
80