Sharp Ux Cl220 Plain Paper Fax And 2 4 Ghz Cordless Phone Wi Operation Manual

9
Antenna
Display
This displays messages and prompts to help you use the cordless handset.
UP and DOWN arrow keys
Receiver volume: When talking on the cordless handset, press these keys to 
adjust the receiver volume. This also adjusts the volume when using a 
headset (purchased separately) connected to the cordless handset.
Ringer volume: When not talking on the cordless handset, press these keys 
to adjust the cordless handset ringer volume.
Scroll through numbers: Press these keys to scroll when...

10
TALK key
Press this key to make or answer a call. 
REVIEW (left) arrow key
Press the REVIEW arrow key and then the UP or DOWN arrow key to scroll 
through your 30 most recent calls (only available if you have Caller ID). This 
key can also be used to move the cursor left when entering or editing an auto-
dial number or name.
Number keys
Use these keys to dial numbers, and enter numbers and letters when storing 
auto-dial numbers. 
PLAY NEW key
Press this key after pressing   to listen to new messages...

11
RECEPTION key
Press this key after pressing   to change the reception mode on the fax 
machine.
STOP key
Press this key to stop playback of messages recorded in the answering 
system.
DELETE
Press this key while listening to a message to delete it. To delete all your 
messages, press this key after playback ends (while the display shows 
REMOTE MODE), followed by  .
HOLD/ERASE key
Hold: Press this key during a call to put the other party on hold.
Erase: Press this key to delete a phone number when...

12
1.  Installation
Unpacking Checklist
Paper tray Paper tray 
extensionOperation 
manualGears (2)
Handset Handset 
cordTelephone 
line cordImaging film
(initial star ter roll)
Cordless
handsetBattery 
coverBattery 
packCordless 
handset charger AC adapter
If any are missing, 
contact your 
dealer or retailer.
Before setting up, 
make sure you 
have all of the 
following items.

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦øù
¦
¦


9
0
+
(
@ó
¦

(
5

Setting Up
13
1. InstallationSetting Up
Selecting a location for the fax machine
To maximize the talking range of the cordless handset and minimize 
interference, we recommend installing the fax machine in a high and central 
location away from obstructions such as walls.
Do not place the 
machine in direct 
sunlight.Do not place the 
machine near 
heaters or air 
conditioners.Keep dust away from 
the machine.Keep the area 
around the 
machine clear.
High and central 
location with no 
obstructions
Keep...

Setting Up
14
Connecting the power cord
Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) outlet.
Caution!
Do not plug the power cord into any other kind of outlet. This will damage the 
machine and is not covered under the warranty.
The machine does not 
have a power on/off 
switch, so the power is 
turned on and off by 
simply plugging in or 
unplugging the power 
cord.
Make sure the handset 
cord goes into the jack 
marked with a handset 
symbol on the side of 
the machine!
Use the...

Setting Up
15
1. Installation
Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine 
marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line 
wall telephone jack.
TEL.LINE
Setting the dial mode 
The fax machine is set for tone dialing. If you are on a pulse dial line, you must 
set the fax machine for pulse dialing. Press the panel keys as follows:
1Press   once and   twice.
 
2Press   once and   twice.
3Press  once.
4Select the...

Setting Up
16
Note: If your area experiences a high incidence of lightning or power surges, 
we recommend that you install surge protectors for the power and telephone 
lines. Surge protectors can be purchased at most telephone specialty stores.
Attach the paper tray and paper tray extension
Attach the paper tray.
Note: The paper tray extension has a top side 
and a bottom side. If the tabs do not go into 
the holes, turn the support over.
About condensation
If the machine is moved from a cold to a warm...

Setting Up
17
1. Installation
Connecting the cordless handset charger
1Connect the AC adapter to the cordless 
handset charger.
2Plug the AC adapter into a standard 
120 V AC outlet.
Important: Never cover the charger and AC adapter with a blanket, cloth, or 
other material. Excessive heating may result and cause fire.
Raising the base antenna
Raise the base antenna to ensure clear communication with the cordless 
handset.
Fit the cord into 
the holders.

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦øþ
¦
¦
...

Setting Up
18
Installing the battery and charging the cordless handset
1Connect the battery connector 
1Connect the battery connector 
, and then place the battery pack in the 
cordless handset.
•Place the wires as shown.
2Place the battery cover on the cordless 
handset, making sure it snaps firmly 
into place.
•Make sure the wires are not caught or 
pinched by the cover.
3Place the cordless handset in the 
charger with the dial pad facing 
forward.
•Important! The dial pad must face 
forward, or the...