Sharp Projector Pg Ls2000 User Manual

							
29
Basic            
Operation
VIDEO/DTV
Input signal For 4:3 screen For 16:9 screen
Video/DTV Image type NORMAL AREA ZOOM V-STRETCH BORDER 16:9
480
I, 480P,
576I, 576P,
NTSC, PAL, SECAM
4:3 aspe ct ratio
                   *1                   *1
Squeeze
                   *1                   *1
Letter box
                   *1                   *1
720P, 1035I,
1080I, 1080P16:9 aspect ratio                     *1
—*2—*2
540P16:9 aspect ratio
(4:3 aspect ratio in 16:9)
                   *1
 : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals
*1 The Image Shif t function can be used for these images.
*2 Same as NORMAL mode.
About CopyrightsWhen using the Resize function to select an image size with a different aspect ratio to a T V 
program or video image, the image will look different from its original appearance. Keep this 
in mind while choosing an image size.
The use of the Resize or Keystone Correction function to compress or stretch the image for 
commercial purposes/public displays in a café, hotel, etc. may be an infringement of 
copyright protected by law for copyright holders. Please use caution.
•
• 
						

							
30
Operating with the Remote Control
POINTER button
ECO+QUIET button
Adjustment buttons 
(
P /R /O /Q )
BREAK TIMER button
SPOT button
AUTO SYNC button FREEZE button
PICTURE MODE button MAGNIFY buttons
EFFECT button
Displaying and Setting the 
Break Timer
1 Press 
BREAK TIMER .The timer starts to count down from 5 
minutes.
On-screen display
2 Press P/R /O /Q  to adjust the 
length of the break time. Increases with  P or  Q
5 minutes  ➞ 6 minutes  ➞ 60 minutesShortens with  O or  R4 minutes  ➞ 3 minutes  ➞1 minute
The break time can be set in units of one 
minute (up to 60 minutes).
Canceling the break timer display function
Press  BREAK TIMER .
The Break Timer is not available while the 
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute
- Input Search
•
Note
•
•
•
•
1
2
Displaying the Pointer
1 Press 
POINTER  and press  P/R /
O /Q on the remote control to 
move the pointer.
Press  EFFECT  to change the pointer icon 
(5 types).
Star Finger1 Finger2 Heart Underline
2 Press 
POINTER  again.The pointer will disappear.
Using the Spot Function
1 Press SPOT and press  P/R /O /Q
on the remote control to move 
the spot area.
Press  EFFECT  to change the spot area 
size (3 types).
1/9 1/25 1/8
2 Press  SPOT again.The spot area will disappear.
Switching the Eco+Quiet 
Mode
Press  ECO+QUIET  to switch the 
Eco+Quiet mode between on and off. 
 When the Eco+Quiet Mode is set to “ON”, the 
sound of the cooling fan will turn down, the power 
consumption will decrease, and the lamp life will 
extend. 
Refer to “Eco+Quiet” on page 40 for details.
•
Note
•
•
•
•
•
1
2
1
2 
						

							
31
Useful        
Features
Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detecting 
input signal after the projector turns on.
Press  AUTO SYNC  to manually adjust 
with Auto Sync function.
When the optimum image cannot be achieved 
with Auto Sync adjustment, use manual 
adjustments. (See page 
41.)
•
Note
Freezing a Moving Image
1 Press 
FREEZE .The projected image is frozen.
2 Press FREEZE  again to return to 
the moving image from the 
currently connected device.
Selecting the Picture Mode
You can select the appropriate Picture 
mode for the projected image, such as 
movie or video game.
Press  PICTURE MODE .
When pressing PICTURE MODE , the Picture 
mode changes in the following order: 
STANDARD PRESENTATION MOVIE GAME sRGB*
See page 38 for details on the Picture mode.
•
Note
*  “sRGB” is displayed only when RGB signal is input.
•
•1
2
Displaying an Enlarged 
Portion of an Image
Graphs, tables and other portions of 
projected images can be enlarged. This 
is helpful when providing more detailed 
explanations.
1 Press MAGNIFY  on the 
remote control.
Enlarges the image.
Pressing   or MAGNIFY  enlarges 
or reduces the projected image.
× 1 ×2 ×3 ×4
Press
.
Press.
You can change the location of the 
enlarged image using 
P,R ,O  and  Q.
•
Note
2 Press 
RETURN  on the remote 
control to cancel the operation.
The magnifi cation then returns to  u1.
The selectable magnifi cations differ 
depending on the input signal.
In the following cases, the image will 
return to the normal size ( u1).
-  When switching the Input mode.
- When  RETURN  has been pressed.
-  When the input signal is changed.
-  When the input signal resolution and  refresh rate (vertical frequency) 
change.
-  When the Resize mode is changed.
•
•
Note
•
•
•
1
2 
						

							
32
Menu Items
The following shows the items that can be set in the projector.
“Picture” menu
Main menu Sub menuPicture
Page38Page38
Page39
Page39
Page39
Page39
Page39
Page40
Page40
+30
-30Contrast
+30
-30
+30
-30
+30
-30
1
-1
2
0
+30
-30+30
-30+30
-30Tint Color
Sharp Bright
Film Mode
Eco+Quiet
 [On/Off]
Reset Auto
Off
CLR Temp
BrilliantColor™
C.M.S. Setting [On/Off]
C.M.S. Standard
Presentation
Movie
Game
sRGB
Picture Mode
Red
Blue
Page
40
DNR Level 1
Level 2
Level 3
C.M.S.-Hue
C.M.S.-Saturation
C.M.S.-Value
Page39
Page39
Page39
Reset
Return +30
-30
R
+30
-30
+30
-30
+30
-30+30
-30+30
-30C G
B Y
M
Reset
“Quick Start Menu”
Main menu
Normal
Full
Native
Area Zoom
V-Stretch
Border
16:9
Quick Start MenuInput Search Start 
Resolution
Eco + Quiet
 [On/Off]
Resize
Information
Go To Complete Menu Keystone
-80 +80 *1
-40 +40 *2
Language
Sub menu
Page 36
Page36
Page36
Page36
Page36
Page36
Page36
Page36
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Portuguêspolski
Magyar
Türkçe
Tiếng Việt
*1 Adjustment range for PG-L X2000.
*2 Adjustment range for PG-LS2000. 
						

							
33
Useful        
Features
“Screen adjustment (SCR-ADJ)” menu
Main menu Sub menuSCR - ADJPage 43
Language
Image Shift Resize
Page
43
Page43
Page44
Page45
Page45
Page45
OSD Display [On/Off]
Page44
Closed Caption
Page44
Overscan [On/Off]
Background
PRJ Mode Logo
Blue
None
Page
45Wall Color Off
Blackboard
Whiteboard
Page45Setup Guide [On/Off] Off
CC1
CC2
Front
Ceiling + Front
Rear
Ceiling + RearNormal
Full
Native
Area Zoom
V-Stretch
Border
16:9
Keystone
-80 +80 *1
-40 +40 *2
Page 43
-96 +96 *1
-75 +75 *2
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Portuguêspolski
Magyar
Türkçe
Tiếng Việt
“Signal adjustment (SIG-ADJ)” menu
Main menu Sub menuSIG-ADJ
Page41
Page41
Page41
Page41
Page41
Page42
Signal Type
Video Setup
Signal Info Auto
RGB
YPbPr
Resolution
0 IRE
7.5 IRE
Page42
Page42
Video System Auto
PA L
SECAM
NTSC4.43
NTSC3.58
PA L - M
PA L - N
PAL-60
+30
-30
+60
-60 +150
-150 +150
-150
Clock
Phase
H-Pos
V-Pos
Reset
Dynamic Range Auto Standard
Enhanced 
						

							
34
“Projector adjustment (PRJ-ADJ1/2)” menu
System Lock
[Enable/Disable]
Keylock [On/Off] 
Page47
Page48
Fan ModePage46Normal
High
Main menu Sub menuPRJ-ADJ1
Page46
Speaker [On/Off] Auto Restart [On/Off]Page46
Auto Power Off [On/Off]
Page46
Page46
Auto Sync [On/Off]
Page46
Main menu Sub menu
Page49
Page49
Page49
Page49
Page49
Page49
PRJ-ADJ2
FUNCTION Button
Input Search 
Audio Mute
Image Shift
Signal Info
STANDBY Mode
Quick Start
Eco
All Reset
Lamp Timer (Life)
Page 49
DLP® LinkTM [On/Off]
DLP
® LinkTM Invert
Quick Start Menu [On/Off]
Page 46
Menu Items (Continued) 
						

							
35
Useful        
Features
Adjustment buttons 
( P /R /O /Q )
ENTER button
RETURN button
Press  RETURN  to return 
to the previous screen 
when the menu is 
displayed.
•
MENU button
Adjustment buttons (
P/R /O /Q )
MENU button
ENTER button
Menu Selections (Quick Start Menu)
This operation can also be performed by using the buttons on the projector.
•
1 Press  MENU.The “Quick Start Menu” screen for the 
selected Input mode is displayed.
2 Press  P or  R to select the 
desired item, then press  ENTER.
3 Press  P/R /O /Q  to adjust the 
item selected, then press 
ENTER .
Info
To display the advanced settings and 
adjustments, select “Go To Complete Menu”. 
Press ENTER  to display the Complete Menu 
screen.
If you do not want to display the Quick Start 
Menu, set “Go To Complete Menu” - “PRJ-ADJ2” 
- “Quick Start Menu” to “Off”. (See page 
49.)
•
•
•1
2
3
Example
SEL./ADJ. ENTER END
Input Search Start
Resolution
Resize
0
Eco+Quiet
Language Keystone
Information 1024×768
Normal
English Off
Quick Start Menu
Go To Complete Menu…
Using the Menu Screen
Select from the Quick Start Menu, which is a collection of the most frequently used 
functions, or the Complete Menu, which enables advanced settings and adjustments. 
						

							
36
Using the Menu Screen (Continued)
Quick Start Menu
The following items can be confi gured on the Quick Start Menu.
Selectable items Description
Input Search Start Automatically searches for and switches to the appropriate Input mode. Pressing an operation button during input searching cancels the search.
Resolution Manually change the resolution. Use this function when the image and screen size do not match with the 
resolution selected automatically. (See page 
41.)
Resize Changes the Resize mode. Use this function to stretch the image vertically or horizontally or when the 
edges of the image cannot be seen. (See page 
43.)
Keystone Corrects the keystone distortion of projected images. Use this function to correct the trapezoidal distortion of images caused when 
projecting images at an angle to the screen. (See page 
43.)
Eco+Quiet When set to “On”, this function reduces the cooling fan noise and power  consumption, thereby prolonging the operating life of the lamp. (See page 
40.)
Language Selects the language displayed on the screen. (See page 
45.)
Information Displays the input signal, lamp use time, remaining lamp life, etc.
Go To Complete Menu Displays the Complete Menu for advanced settings and adjustments.
The setting of Resize mode will be made independently for each Input mode.
The setting of Eco+Quiet mode will be made independently for each Input mode and each Picture 
mode.
•
•
Note
Menu Selections (Complete Menu)
Example: Adjusting “Bright”.This operation can also be performed by using the buttons on the projector.
•
1 Press  MENU.The “Quick Start Menu” screen is 
displayed.
2 Press  P or  R to select “Go To 
Complete Menu”.
3 Press  Q or  O and select 
“Picture” to adjust.
Info
When “PRJ-ADJ2” - “Quick Start Menu” is 
set to “On”, pressing  MENU displays the 
Quick Start Menu screen.
•
•1
2
3
Example: “Picture” screen menu for
     COMPUTER (RGB) input
Menu item
Picture ModeContrast 0 0
0
Bright
Standard
SEL./ADJ. ENTER END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Eco+Quiet 0
1On
Off
DNR
Level 2
Reset
SIG SCR PRJ1 PRJ2
Picture 
						

							
37
Useful        
Features
4 Press  P or  R and select “Bright” 
to adjust.
The selected item is highlighted.
To adjust the projected 
image while watching it
Press  ENTER .The selected item (e.g. “Bright”) is 
displayed by itself at the bottom of the 
screen.
When pressing  P or  R, the following item 
(“Red” after “Bright”) will be displayed.
Press  ENTER  again to return to the 
previous screen.
•
Note
5 Press 
O or  Q to adjust the item 
selected.
The adjustment is stored.
6 Press  MENU.The menu screen will disappear.
•
•
•
•
•
4
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode Standard
SEL./ADJ. Single ADJ END
Resize
Image Shift 0 0
Keystone
Normal
Picture Mode
Contrast 0
0
Standard
SEL./ADJ. END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Eco+Quiet 0
1On
Off
Reset
Bright 0
DNR Level 2
Picture
Pict. SCR-ADJ
SIG PRJ1 PRJ2
SIG SCR PRJ1 PRJ2
Picture
Items to be adjusted
The item displayed by itself Press 
ENTER .
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode Standard
SEL./ADJ. Single ADJ END
Resize
Image Shift 0 0
Keystone
Normal
Picture Mode
Contrast 0
0
Standard
SEL./ADJ. END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Eco+Quiet 0
1On
Off
Reset
Bright 0
DNR Level 2
Picture
Pict. SCR-ADJ
SIG PRJ1 PRJ2
SIG SCR PRJ1 PRJ2
Picture
Items to be adjusted
The item displayed by itself Press 
ENTER .
5Picture Mode
Contrast 0
0Standard
SEL./ADJ. Single ADJ END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Eco+Quiet 0
1On
Off
Reset
15
Bright
DNR Level 2
Picture
SIG SCR PRJ1 PRJ2
Picture Mode
Contrast 0
0Standard
SEL./ADJ. Single ADJ END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Eco+Quiet 0
1On
Off
Reset
15
Bright
DNR Level 2
Picture
SIG SCR PRJ1 PRJ26
The MENU  button is not available while the projector is operating: 
- Auto Sync/Break Timer/Freeze/AV Mute/Input Search
•
Note 
						

							
38
Picture Adjustment (“Picture” Menu)
Menu operation n Page 36
Q PAG E1 QPAG E 2
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END 0
0
Red
Blue
Picture
SIG SCR PRJ1 PRJ21
2Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S. Standard
Film Mode
Eco+Quiet
0
1
On
Auto
Off
DNR
Level 2
Reset
SEL./ADJ. ENTER END
765 4
23
Picture SIG SCR PRJ1 PRJ2
1Selecting the Picture Mode
Selectable 
items Description The default settings of each item when selecting Picture Mode
CLR Temp BrilliantColorTMEco+Quiet
Standard For standard image 0 1 Off
Presentation Brightens portions of image for  more enhanced presentations. 02Off
Movie Gives natural tint to the  projected image. –1 0 O n
Game Gives sharpness to the  projected image. 01Off
*sRGB For high fi delity reproduction of  images from a computer. ––Off
“sRGB” is displayed only when RGB signal is input.
You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are 
retained in memory. 
You can also press 
PICTURE MODE on the remote control to select the Picture mode. (See page 31.)*sRGB is an international standard of color reproduction regulated by the IEC (International 
Electrotechnical Commission). As the fi xed color area has been decided by the IEC, the images are 
displayed in a natural tint based on an original image, when “sRGB” is selected.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColor
TM” and “C.M.S.”, when “sRGB” is 
selected.
•
•
Note
Info
When “sRGB” is selected, the projected image may become dark, but this does not indicate a 
malfunction.
•
•
•