Sharp Projector Pg D100u User Manual

E-21
On-Screen Display
LANGUAGE
:SEL.:ENTERENTER:ENDMENU
NEDERLANDS ESPAÑOL
DEUTSCH
ENGLISH
SVENSKA ITALIANO FRANÇAIS
5. Select one of eight ON-SCREEN DISPLAY
languages
You can return to the previous screen by selecting the
uppermost item (turquoise) with the ADJUSTMENT 
/
buttons (in this case, LANGUAGE) and then pressing
the ENTER button.
The on-screen display is set to English at the factory. The
language for the unitÕs ON-SCREEN DISPLAY can be set
to English, German, Spanish, Dutch, Swedish,...

E-22
For viewing the
picture from a
video source
connected to:
VIDEO INPUT or
S-VIDEO INPUT
7. Select input
Press the INPUT SELECT button to switch the picture
input. When you press the button, the current input mode
is displayed for about 4 seconds. If you press the button
again while the input mode is displayed, the mode
changes as shown on the left.
Confirm the selected input terminal and press the INPUT
SELECT button.
Notes:
·This can be selected directly using the VIDEO and DATA
buttons on the...

E-23
Adjusting the Picture
·This projectorÕs picture is factory preset to standard settings. However, you can adjust it to suit your own prefer-
ences with the ADJUSTMENT buttons on the projector and the remote control.
·The adjustments can be memorized in RGB or VIDEO separately.
·Four picture modes can be adjusted: ÒPICTURE,Ó ÒBRIGHT,Ó ÒRED,Ó  and ÒBLUE.Ó
Adjusting the Picture
1. Use the MENU button to select the mode
to be adjusted.
·When the MENU button is pressed, the MENU mode is
indicated for...

E-24
Computer Mode Memory Adjustments
·The projector has been preset with different modes for
use with SVGA and other compatible computers.
However, 7 memory positions are provided to store
mode adjustments.
·Each memory position can be used to store mode
adjustments to match the computer.
1. Press the ENTER button to select the
Memory Adjustment mode.
·Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT 
/ buttons to
select ÒRGB ADJ.Ó Press the ENTER button. The
MENU mode...

E-25
Adjusting the Audio
·The projector Õs audio is factory preset to the standard setting. However, you can adjust it to suit your own prefer-
ence with the ADJUSTMENT buttons on the projector or the remote control.
·You can adjust the BALANCE, TREBLE and BASS, and also select the SRS 3-D SOUND mode.
·To return to the factory preset mode, press the ADJUSTMENT 
/ buttons to select RESET, then press the
ENTER button.
·Press the MENU button to select the normal screen mode.
Adjusting the Balance, Treble,...

E-26
E-ZOOM Function
E-ZOOM Function
nThis projector has an E-ZOOM (640 ´ 480 dot, etc.) mode which enlarges the display when inputting an image of
less than 800 ´ 600 dot in resolution. In the XGA (1024 ´ 768 dot) mode, compression enables full-mode display.
1. Press the MENU button to select E-ZOOM
mode.
Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT 
/ buttons to select
IMAGE ADJ. Then press the ENTER button to display the
IMAGE ADJ. screen as shown. Press the...

E-27
Functions on the Projector
Setting Up the System
·Using this function, you can check the input signal and select the remote mouse.
Checking the system
·Press the MENU button. Select SYSTEM SETUP with
the ADJUSTMENT 
/ buttons. Then press the ENTER
button to change to the picture indicated on the left.
·The current system conditions will be displayed on the
screen.
·Press the MENU button to select the normal screen
mode.
Note:
In the video screen, the resolution and frequency settings will
not be...

E-28
Using the Black Screen Function
This projector is equipped with a Black Screen Function.
This function can be used to black out the presentation
image.
·Press the MENU button. While the MENU screen is
displayed, press the ADJUSTEMENT 
/ buttons to
select IMAGE ADJ. Then press the ENTER button to
display the IMAGE ADJ. screen shown. Press the
ADJUSTMENT 
/ buttons to select ÒBLACK
SCREEN,Ó and press the ADJUSTMENT 
/ buttons
to select ON. Then press the MENU button to display
the black screen.
Note:...

E-29
On-screen Display
Using the Blue Screen Function
This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
is turned off.
·Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT 
/ buttons to
select IMAGE ADJ. Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT 
/ buttons to select ÒBLUE SCREEN,Ó
and press the ADJUSTMENT 
/...

E-30
Air Filter Maintenance
nThe air filter should be cleaned every 100 hours of use. Clean the filter more often when the projector is used in a
dusty or smoky location.
nHave your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center replace the filter (PFILD
0051CEZZ) when it is no longer possible to clean it.
Cleaning and Replacing the Filter
13
Turn OFF
the MAIN POWER.
2
Remove
the FILTER COVER.Remove
the AIR FILTER.
46Clean the AIR FILTER.5Replace the AIR FILTER.Replace
the...