Sharp Projector Pg D100u User Manual

E-1
Dear SHARP Customer
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the
most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you have the ability to adjust the picture and color to your personal viewing preference.
We sincerely hope that you will be...

E-2
WARNING:FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the userÕs authority to operate this equipment.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This...

E-3
IMPORTANT SAFEGUARDS
14) Lightning Ð For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent
damage to the product due to lightning and power-line surges.
15) Overloading Ð Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
16) Object and Liquid Entry Ð Never...

E-4
Cautions Concerning the Laser Pointer
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM
WAVE LENGTH : 670nm
MAX. OUTPUT : 1mW
CLASS II LASER PRODUCT
COMPLIES WITH 21 CFR SUBCHAPTER JSHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH, NEW JERSEY 07430
TEL : 1-800-BE-SHARP
U.S.A. ONLYREMOTE CONTROL
MODEL NO. : RRMCG1327CESA
DC6V (1.5VX4PCS.)
MADE IN JAPAN
FABRIQUÉ AU JAPON
CAUTION - use of controls or
adjustments or performance of
procedures other than those
specified herein may result in
hazardous...

E-5
Location of Controls
FRONT VIEW
Cooling fan
(Intake vent)Cooling fan
(Exhaust vent)Adjuster
Cooling fan
(Exhaust vent)
Remote sensor
Focus knob
Zoom knobCarrying handle
POWERON/OFF
LAMP
TEMP.INPUT
SEL .
ENTERMUTEVOL
MENU
MN ENIN
S-VIDEO INPUT
(4-pin mini DIN)WIRED REMOTE
CONTROL INPUT
(3.5 mm Mono Minijack)
COMPUTER AUDIO  INPUT
(3.5 mm Stereo Minijack)
VIDEO INPUT
Video: RCA
Audio: RCACOMPUTER RGB INPUT
connector (HD-15)MOUSE TERMINAL
Use when operating your personal computer
with the wireless mouse...

E-6
Operating the Wireless Mouse Remote Control
The functions of your personal computerÕs mouse have been built into the remote control enabling you to operate
your projector and personal computer with only the remote control.
1. Slide the main power switch on the side of the unit on.
2. Press the POWER ON button on the front panel of the remote control to turn the projector power on.
3. When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT sliding switch to the
MOUSE position....

E-7
Using the optional cable with the remote control
·When the remote control cannot be used due to the
range or positioning of the projector (rear projection,
etc.), connect the optional cable from the Wired
Remote Control Jack of the remote control to the
Wired Remote Input on the back of the projector.
Note:
·The signal transmitter does not function when the optional
cable is connected to the remote control.
Inserting the Batteries
Remove the battery cover as shown and insert four AA
size batteries...

E-8
Wireless Mouse Functions
By attaching the provided mouse cable to both the mouse terminal on your projector and the mouse terminal on
your personal computer, you can use the wireless mouse built into the remote control, instead of the mouse
equipped with your personal computer, to operate your personal computer. The wireless mouse functions will work
with personal computers compatible with IBM PS/2, serial (RS-232C) or Apple ADB type mouse systems.
Connection Example
S-VIDEOVIDEO IN AUDIO IN
VIDEO L...

E-9
Setting Up the Projector
Using the Focus and Zoom
·Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector placement.
·See pages 11 and 12 for details on projector setup.
SIDE VIEW
Invert Image
Zoom
Ceiling setting
Table setting
Zoom
4
FOCUS
ZOOM
3. Adjusting the Focus
Rotate the focus knob until the top portion of the screen is
in focus.
4. Adjusting the Zoom
Rotate the zoom knob. The picture can be adjusted to the
desired size within the zoom range.
3
FOCUS
ZOOM
2....

E-10
Projector Distance and Picture Size Relationship
nThe zoom lens allows adjustment of the image size within the projector Õs range.
nFor optimum picture adjustment, the projector should be placed and adjusted at a distance between 5.1 ft to 56.3
ft from the screen.
Distance from screen
Picture size: 100 inches (254 cm)Maximum projection distance
56.3 ft (17.2 m)
28.0 ft (8.5 m)
18.5 ft (5.7 m)
14.8 ft (4.5 m)
11.0 ft (3.4 m)
7.2 ft (2.2 m)
Picture size
(diag.)
300 inches
150 inches
100 inches
80...