Sharp Projector Pg C355w User Manual

-39
Basic Operation
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can use the remote control as the
computer mouse.
If the computer is placed too far away from the projector to be connected via the USB cable, the separately
sold remote receiver (AN-MR2) makes it possible to operate the projector with the remote control.  For de-
tails, see the operation manual of the receiver.
Connecting with a USB cable
The mouse pointer can...

-40
Menu Items
The following shows the items that can be set in the projector.
“Picture” menu
+30
-30
+30
-30
+30
-30
+30
-30
+30
-30
+30
-30
Tint Color
Reset Sharp Bright
+30
-30Contrast
Red
Blue
Progressive
Picture
Main Menu
Sub Menu
CLR Temp
Page 45
Page  45
Page 45
Page  45
Page  46
Page  45
Picture Mode Standard
Presentation
Movie
Game
sRGB
*1
*2
*2
*2
*3
*3
3D Progressive
2D Progressive
5500K
6500K
7500K
8500K
9300K
10500K
Film ModePage  46Auto
Off
Eco+Quiet ModePage  46On
Off
DNRPage  46Off
Level...

-41
Useful Features
“Screen adjustment (SCR-ADJ)” menu
On
Off
On
Off
Main Menu Sub Menu
OSD Display
BackgroundLogo
Blue
None
Normal
Full
Dot By Dot
Area Zoom
V-Stretch
Stretch
Center
Upper Right
Lower Right
Upper Left
Lower Left
Menu Position
Page
 50
ResizePage  49
Page  50
Page  50
Auto V-Keystone
Page  49
Page  49
Page  49
+40
-40Image Shift
V-KeystonePage  49+100
-100
H-Keystone
SCR-ADJPage  49
LanguagePage  50
Front
Ceiling + Front
Rear
Ceiling + RearPRJ ModePage  50
English
Deutsch
Español...

-42
“Network” menu
“Projecter adjustment (PRJ-ADJ)” menu
Main Menu
NetworkPage 54
On
Off
IP Address
Subnet Mask
Gateway
Page  54
TCP/IPPage  55
DHCP ClientPage  55
Page  55
Password Old Password
New Password
Reconfirm
MAC Address
Page  55Projector
*2 *1
*2
On
Off
Normal
High
LAN/RS232C
Monitor Out
RS-232C
PRJ-ADJ
Enable
Disable9600 bps
38400 bps
115200 bps
Enable
Disable
Main Menu Sub Menu
Page 51
FAO
VAOAudio OutPage  51
Page  52
Page  51
Page  51
SpeakerPage  51
Fan ModePage  52
All ResetPage  53
On...

-43
Useful Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.
•This operation can also be performed by using the buttons on the projector.
MENU button
MOUSE/Adjustment 
buttons (
'/" /\ /| )
RETURN buttonENTER
button
• Press  RETURN  to 
return to previous 
screen when the 
menu is displayed
Adjustment 
buttons ( '/" /\ /| )
MENU button ENTER button
RETURN button
Example: “Picture” screen menu1Press 
MENU .
•The “Picture” menu screen for the se-...

-44
3Press '
' '
'
'  or 
"
" "
"
"  and select
“Bright” to adjust.
• The selected item is highlighted.
To adjust the pro-
jected image while
watching it
Press  ENTER .
•The selected item (e.g. “Bright”) is dis-
played by itself at the bottom of the
screen.
• When pressing 
'
' '
'
'  or 
"
" "
"
" , the following
item (“Red” after “Bright”) will be dis-
played.
Note
• Press  ENTER  again to return to the
previous screen....

-45
Useful Features
Menu operation  Page 43
1
1 1
1
1Selecting the Picture Mode
Picture Adjustment (“Picture” menu)
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture”
menu to your preference. Any changes you make
are retained in memory.
Note
• You can also press  PICTURE MODE on the
remote control to select the picture mode. (See
page  36.)
• *sRGB is an international standard of color re-
production regulated by the IEC (International
Electrotechnical...

-46
4
4 4
4
4Selecting the Progressive Mode
5
5 5
5
5
Selecting the Film Mode
This function provides high-quality playback of
images originally projected at 24 fps, such as
movies on DVDs.
DescriptionFilms are detected automatically.
Films are not detected.Selectable itemsAuto
Off
Note
•When using progressive inputs, “Film Mode”
cannot be selected.
• The “Film Mode” function does not work when
“2D Progressive” is selected in “Progressive
Mode”.
6
6 6
6
6Reducing Image Noise (DNR)
Video digital noise...

-47
Useful Features
0
0
0
0Phase
Clock Pict.
SIG–
ADJ SCR PRJ Net.H-Pos
V-Pos
Reset
Auto 640 x 480
On
Standard
Auto
SEL./ADJ.
RETURN ENTER
END
Resolution
Auto Sync
Signal Type Dynamic Range
Video System
Signal Info : 800 x 600
H 60.3 kHz /  V   37.8    Hz
1
3 4
5
6
2
7
Signal Adjustment (“SIG-ADJ” Menu)
1
1 1
1
1Adjusting the Computer Image
If the optimum image cannot be obtained with Auto
Sync adjustment, use the  SIG-ADJ function.
Note
•To  reset all adjustment items, select “Reset” and
press  ENTER ....

-48
Menu operation  Page 43
7
7 7
7
7
Checking the Input Signal
This function allows you to check the current in-
put signal information.
Note
•The Video signal can only be set in VIDEO or
S-VIDEO mode.
• When “Video System” is set to “Auto”, you may
not receive a clear picture due to signal differ-
ences. Should this occur, switch to the video
system of the source signal.
*When reproducing NTSC signals in PAL video
equipment.
Selectable itemsAuto
PA L
SECAM*NTSC4.43
NTSC3.58
PAL-MPAL-N
P AL -60
6
6 6
6...