Sharp Projector Dt 200 User Manual

E-30
Basic Operation
Adjusting the Picture
Adjusting the Color Temperature
This function allows for selecting the desired color
temperature from six settings. With the lower value
selected, the projected image becomes warmer,
reddish and incandescent-like while with the higher
value, the image becomes cooler, bluish and
fluorescent-like.
Description of Color Temperature
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to select “CLR Temp”, and then press
.
3Press 
/ to select the desired color...

E-31
Basic Operation
Gamma Correction Function
Gamma is an image quality enhancement function.
Four gamma settings are available to allow for
differences in the brightness of the room.
Description of Gamma Modes
Description Selected Mode
Standard
Black Detail
White Detail
BrightenStandard picture without gamma correction
Gives greater depth to darker portions of
images for a more exciting theater experience.
Emphasizes the gradation of the intermediate
to high brightness portions of the image for
more...

E-32
Basic Operation
Picture Setting Function
This function stores all items set in “Picture”. Five
settings can be stored separately in “Memory 1” to
“Memory 5”. Each stored setting is reassigned to each
input mode (INPUT 1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is changed, you
can easily select optimal settings from the stored
settings.
•This function can be operated using the PICTURE SETTING
button on the projector or on the remote control, as well as
the OSD menu screen....

E-33
Basic Operation
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the DMD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
• “Clock”, “Phase”, “H-Pos” and “V-Pos” cannot be used in the
DIGITAL INPUT mode and the Component mode.
• Computer image adjustments can be made easily by...

E-34
Basic Operation
Adjusting the Computer and DVD/DTV Images
Special Modes Adjustment
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Fine Sync” menu
screen.
3Press 
/ to select “Special Modes”, and then...

E-35
Basic Operation
Adjusting the Computer and DVD/DTV Images
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Select whether the image is to be synchronized
automatically when switching the signal with “ON” or
“OFF”.
OFF (
)
•Synchronized adjustment is not automatically
performed.
•Press AUTO SYNC to perform manual adjustment.
ON (
)
•Synchronized adjustment is automatically performed.
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Fine Sync” menu...

E-36
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Options” menu screen.
3Press 
/ to select “OSD Display”.
4Press 
/ to select “ON” () or “OFF” ().
5To exit the menu screen, press MENU.On-screen Display
Description Selected item
ON (
)
OFF (
)
Description of OSD Display
All On-screen Display are displayed.
INPUT is not...

E-37
Basic Operation
Selecting a Background Image
On-screen DisplayThis function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Options” menu screen.
3Press 
/ to select “Background”.
4Press 
/ to select the background image you
want to display on the screen.
5To exit the menu screen, press MENU.
Selected item
Blue (
)
None (
)Description
Blue screen
Black...

E-38
Basic Operation
Adjustments for the Screen Position and Size
On-screen DisplayYou can adjust settings according to the position and
size of the screen.
Description of Adjustment Items
Digital Shift Setting
This function allows you to adjust the vertical position
of the image.
Description of Digital Shift
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Options” menu screen.
3Press 
/ to select “Digital Shift”.
4Press 
/ to move the  mark of the Digital Shift
setting.
5To...

E-39
Basic Operation
1Press MENU. The “Picture” menu screen appears.
2Press 
/ to display the “Options” menu screen.
3Press 
/ to select “Subtitle”.
4Press 
/ to move the  mark of the Subtitle
setting.
5To exit the menu screen, press MENU.
•When changing the screen with the Subtitle setting, not only
the bottom of the screen rises, but also the upper part is
changed to a certain point.
•The subtitle setting can be adjusted more effectively with
the Digital Shift function.
•The “Subtitle” cannot be...