Sharp Pn V601 Operation Guide

E21
RS-232C command table
How to read the command tableCommand:  Command field (See page 17.)
Direction:  W When the “Parameter” is set in the parameter field (see page 17), the command functions as described 
under “Control/Response Contents”.
  R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+” 
(repeater control) in the parameter field (see page 17).
Parameter:  Parameter field (See page 17.)
Reply:  Response (Returned value)
*1: 
“●” indicates a command...

E22
PICTURE menu
FunctionCommandDirectionParameter Reply Control/Response contents *1*2
(A) (B)
AUTO AGINW 1When the input mode is PC D-SUB, PC RGB. -
○
○
CONTRAST CONTWR 0-600-600-127 on PC D-SUB, PC RGB.
○
BLACK LEVEL BLVLWR 0-600-600-127 on PC D-SUB, PC RGB.
TINT TINTWR 0-600-60
COLORS COLRWR 0-600-60
SHARPNESS SHRPWR 0-240-24
ADVANCED
(When the input 
mode is AV.) FLESH TONE
FLESWR 0-20-20: OFF, 1: LOW, 2: HIGH
○3D-NR TDNRWR 0-20-20: OFF, 1: LOW, 2: HIGH
MPEG-NR MPNRWR 0-10-10: OFF, 1: ON
3D-Y/C...

E23
SETUP menu
FunctionCommand DirectionParameter ReplyControl/Response contents*1*2
(A) (B)
OSD H-POSITION  OSDH WR0-1000-100
○
○ ○OSD V-POSITION OSDV WR0-1000-100
MONITOR STDR WR0-10-1 0: LANDSCAPE, 1: PORTRAIT
○LANGUAGE LANG WR1414 ENGLISH
○
11 DEUTSCH
2 2 FRANÇAIS
3 3 ITALIANO
4 4 ESPAÑOL
5 5РУССКИЙ
6 6
 
POWER ON DELAY PWOD WR00 OFF
○1-601-60 ON
STANDBY MODE STBM WR0-10-1 0: STANDARD, 1: LOW POWER
(“ERR" when SCHEDULE is effective or OFF is selected for LED.)
○
OFF IF NO OPERATION ATOF WR0-10-1...

E24
OPTION menu
FunctionCommand DirectionParameter ReplyControl/Response contents*1*2
(A) (B)
DATE/TIME SETTING DATE WR
AABBCCDDEE AABBCCDDEEAA: Year, BB: Month, CC: Day, DD: Time, EE: Minute○
○ ○SCHEDULE SC01-
SC08WR ABCDEFFGGH ABCDEFFGGH
Schedule of a specified number
A: Schedule  0= Not effective, 1 = Effective
B: Power  0 = OFF, 1 = ON
C: Day of the week 1  0 = Only once, 1 = Every week, 2 = Every day
D: Day of the week 2  0 = Sunday, 1 = Monday through 6 = Saturday,
  9 = Not exist
E: Day of the...

E25
Controlling the Monitor with a PC (RS-232C)
MULTI menu
FunctionCommand DirectionParameter Reply Control/Response contents *1*2
(A) (B)
ENLARGE ENLGWR 0-10-10: OFF, 1: ON
-
○○
ENLARGE MODE EMAGWR 0-40-40: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5
EMHV WR 11-5511-551 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are 
the numbers of monitors specified for the longest direction and the 
shortest direction respectively.)
IMAGE POSITION (M x N) EPHVWR 11-5511-55Specifies values in the...

E26
PIP/PbyP menu
FunctionCommandDirectionParameter Reply Control/Response contents *1*2
(A) (B)
PIP MODES MWINWR 0-30-30: OFF, 1: PIP, 2: PbyP, 3: PbyP2
○
○○PIP SIZE MPSZWR 1-121-12○PIP POS THE LONGEST 
DIRECTION MHPS
W 0-100○R 0-100○THE SHORTEST 
DIRECTION MVPS
W 0-100○R 0-100○PIP POS LD+SD BATCH MPOSW 0-100,0-100 Specify the position in MPOSxxxyyy format. 
(xxx: Longer side, yyy: Shorter side position)○
R 0-100,0-100Returns a response in (xxx,yyy) format. 
(xxx: Longer side, yyy: Shorter side...

E27
Others
FunctionCommandDirectionParameter Reply Control/Response contents *1*2
(A) (B)
SCREEN SIZE (PC) WIDEWR 1-51-51: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2
○
○○SCREEN SIZE (AV) WIDEWR 1-51-51: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot○VOLUME VOLMWR 0-310-31○MUTE MUTEWR 0-10-10: OFF, 1: ON -
INFORMATION MODELINF1R Value
●SERIAL NOSRNOR Value
BRIGHT VLMPWR 0-310-31
○TEMPERATURE SENSOR DSTAR 0Internal temperature normal
●
1Internal temperature abnormal (Standby mode)
2 Internal...

28E
When the PN-ZB02 (optional) is attached, your monitor can 
be connected to a LAN allowing you to control it from a PC on 
the LAN. 
You can also configure the monitor to send e-mail notification 
when it has a problem. 
The connection requires a commercially available LAN cable 
(UTP cable, Category 5, straight through).
Hub 
LAN terminal 
LAN cable (commercially available, straight)  Network (LAN) 
TIPS
• 
You must assign an IP address to the monitor by following 
the procedures in “Settings to...

29E29
■	To	set	from	a	PC
When the monitor is connected to a PC, LAN settings can be 
configured via PC. 
Set up process
(1) Connect your monitor to a PC
(2) Specify the PC’s IP address
(3) Configure the monitor’s LAN settings
(1) Connecting your monitor to a PC
Connect a commercially available crossover LAN cable 
(UPT cable, Category 5) to the LAN  port on the PC and this 
monitor.
LAN cable (commercially available, crossover) 
To LAN terminal  PC 
LAN terminal
(2) Specifying the PC’s IP address
To...

30E30
5. Click on “LAN SETUP” under NETWORK. 
6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. 
DHCP CLIENT
If your LAN has a DHCP server and you wish to obtain an 
address automatically, change this setting to “ON”. 
To set the address manually, set this to “OFF”. 
IP ADDRESS
If the DHCP CLIENT is set to “OFF”, specify an IP 
address.
SUBNET MASK
If the DHCP CLIENT is set to “OFF”, specify the subnet 
mask.
DEFAULT GATEWAY
If the DHCP CLIENT is set to “OFF”, specify the default 
gateway. 
If you are not...