Home > Sharp > Television > Sharp Pn S655 Operation Guide

Sharp Pn S655 Operation Guide

Here you can view all the pages of manual Sharp Pn S655 Operation Guide. The Sharp manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 21

21E
Your monitor can be connected to a LAN allowing you to 
control it from a PC on the LAN. 
You can also configure the monitor to send e-mail notification 
when it has a problem. 
The connection requires a commercially available LAN cable 
(UTP cable, Category 5, straight through).
Hub 
LAN terminal 
LAN cable (commercially available, straight) 
Network (LAN) 
TIPS
• 
You must assign an IP address to the monitor by following 
the procedures in “Settings to connect to a LAN”. (See the 
description on...

Page 22

22E22
■	To	set	from	a	PC
When the monitor is connected to a PC, LAN settings can be 
configured via PC. 
Set up process
(1) Connect your monitor to a PC
(2) Specify the PC’s IP address
(3) Configure the monitor’s LAN settings
(1) Connecting your monitor to a PC
Connect a commercially available crossover LAN cable 
(UPT cable, Category 5) to the LAN  port on the PC and this 
monitor.
LAN cable (commercially available, crossover) 
To LAN terminal  PC 
LAN terminal
(2) Specifying the PC’s IP address
To...

Page 23

23E23
5. Click on “LAN SETUP” under NETWORK. 
6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. 
DHCP CLIENT
If your LAN has a DHCP server and you wish to obtain an 
address automatically, change this setting to “ON”. 
To set the address manually, set this to “OFF”. 
IP ADDRESS
If the DHCP CLIENT is set to “OFF”, specify an IP 
address.
SUBNET MASK
If the DHCP CLIENT is set to “OFF”, specify the subnet 
mask.
DEFAULT GATEWAY
If the DHCP CLIENT is set to “OFF”, specify the default 
gateway. 
If you are not...

Page 24

24E24
■	INFORMATION
Information about this monitor appears. 
■	CONTROL
You can control the operations corresponding to the buttons  
(POWER INPUT SIZE) on the remote control unit. (See page 3.)
TIPS
•  In standby mode, Power ON is the operation available.
■	ADJUSTMENT
You can adjust these settings which are also available on the 
monitor’s menu. 
•  SCREEN (See page 6.)
•  PICTURE (See Page 6.)
•  PICTURE (ADVANCED) (See Page 6.)
•  AUDIO (See page 6.)
•  SETUP (See page 7.)
•  OPTION (See page 7.)
•...

Page 25

25E25
■	NETWORK	(LAN	SETUP)
This screen allows you to set the settings necessary when the 
monitor is connected to a LAN.
DHCP CLIENT
If your LAN has a DHCP server and you wish to obtain an 
address automatically, change this setting to “ON”. 
To set the address manually, set this to “OFF”. 
IP ADDRESS
If the DHCP CLIENT is set to “OFF”, specify an IP address.
SUBNET MASK
If the DHCP CLIENT is set to “OFF”, specify the subnet 
mask.
DEFAULT GATEWAY
If the DHCP CLIENT is set to “OFF”, specify the default...

Page 26

26E26
■	NETWORK	(GENERAL)
This screen allows you to specify the general LAN settings.
MONITOR NAME
Specify a name for this monitor as it should appear on the 
Internet Explorer screen.
AUTO LOGOUT TIME
Specify the time (in minutes) to elapse before automatically 
disconnecting this monitor from the network. 
Specify in minutes from 1 to 65535. A value of ‘0’ will disable 
this function. 
DATA PORT
Specify the TCP port number to use for exchanging data with 
the monitor. 
Specify a value from 1025 to...

Page 27

27E27
■	MAIL	(RECIPIENT)	
This screen allows you to specify the recipients of the e-mail 
sent periodically or when the monitor has an error.
RECIPIENT E-MAIL ADDRESSES
Specify the e-mail addresses to send error notification e-mail 
to.
CONDITION
Specify the conditions to send mails.  
When you check PERIODICAL, specify the date and time to 
send the mails in the PERIODICAL setting.
CONFIRMATION
Sends test e-mail.
This allows you to confirm that the e-mail settings are 
configured properly.
Attach 	the...

Page 28

28E28
Controlling the Monitor with a PC (LAN)
■		 SERVICE	&	SUPPORT	 
(URL INFORMATION)
You can display a specific URL in the URL INFORMATION 
field on the INFORMATION screen when an error occurs in 
the monitor. (See page 24.)
URL INFORMATION
Enter a URL to display when an error occurs on the monitor.
Up to 64 alphanumeric characters or symbols can be used.
CONDITION
Specify the condition to display the URL.
CONFIRMATION
The home page of the specified URL is displayed.
You can check whether the URL you...

Page 29

29E29
M E M O 
 

Page 30

PN-S655 G EN08F(1)
 
Start reading Sharp Pn S655 Operation Guide

Related Manuals for Sharp Pn S655 Operation Guide

All Sharp manuals