Sharp Pn S655 Operation Guide

PN-S655 
LCD MONITOR 
 
 
OPERA TION GUIDE 
 

2E
Basic Operation ............................................................... 3
Menu Items  ....................................................................... 5
Displaying the menu screen  ......................................... 5
Menu item details  ......................................................... 6
Adjustments for PC screen display  ............................ 10
Initialization (Reset)/Functional Restriction Setting  ... 11
Controlling the Monitor with a PC (RS-232C)...

3E
Basic Operation
1 
2  3 
4 
5 
6 
7 
8
1. INPUT (Input mode selection)
The menu is displayed. Press 
 or  to select the input 
mode, and press 
 to enter.
*  You can select the input terminal by pressing the input 
switch of the monitor.
Input mode VideoAudio
PC1 DVI-D
*1PC1 input terminal
PC audio input 
terminal
PC2 HDMI
*2PC2 input terminal
PC3 D-SUB PC3 input terminal
PC4 RGB
*3PC4 input terminals
AV1 DVI-D
*1AV1 input terminal
AV audio input 
terminals
AV2 HDMI
*2AV2 input terminal
AV3 COMPONENT...

E4
Basic Operation
n Switching the screen size
Even when the screen size is changed, the display may remain the same de\
pending on the input signal.
WIDEPC input
Displays image so it fills the entire screen.
AV input An image with a 4:3 aspect ratio is stretched to fill the entire 
screen.
ZOOM 1
PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen 
without changing the aspect ratio. The edges of the image may be 
cut off.
AV input
ZOOM 2
PC input Use this size if ZOOM 1 cuts...

5E
Menu Items
Displaying the menu screen
Video and audio adjustment and settings of various functions 
are enabled. This section describes how to use the menu 
items. See pages 6 to 8 for details of each menu items.
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
1. 
Press MENU to display the menu screen.
1920x1080 
V: 60 Hz    H: 66.3 kHz
AUT O 
CLOCK 
PHASE 
H-POS 
V -POS 
H-SIZE 
V -SIZE 
H-RESOLUTION 
V- RESOLUTION 
RESET 
SCREEN 
PICTURE  AUDIO 
SETUP  
OPTION 
ENLARGE  PIP/PbyP...

E6
Menu item details
The menu will differ depending on the input mode.
nSCREEN
AUTO (PC3/PC4)
The CLOCK, PHASE, H-POS, and V-POS are automatically 
adjusted.
Pressing  
 
performs adjustment.
Use this automatic adjustment when you use the PC3 input 
terminal or PC4 input terminals to display a PC screen for 
the first time or when you change the setting of the PC. (See 
page 10.)
CLOCK (PC3/PC4)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of...

E7
nSETUP
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
LANGUAGE
Sets the display language for the menu screen.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted 
automatically according to the screen size control signal 
included in the video signal input from the AV2 input terminal.
PICTURE FLIP
A picture flips to appear.
STANDARD MIRROR 
ROTATE 
UPSIDE DOWN 
ABC ABC 
ABC ABC
POWER ON DELAY
You...

E8
Menu Items
AUTO OFF
Sets the display method when no signals for the sub screen 
are input in PIP, PbyP, or PbyP2 mode.
MANUAL .......  
Displays a main screen and a black sub screen.
AUTO  ............ Displays the main screen as a full screen.
TIPS
• When WHITE BALANCE is set to THRU, BLACK LEVEL, 
CONTRAST, TINT, COLORS and GAMMA cannot be set.
•  If COLOR MODE is set to sRGB or VIVID, the following 
items cannot be set. 
WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY 
TO USER, and GAMMA
nDual screen...

E9
Menu Items
n Enlarge
• 
You can align several monitors and integrate them into a 
single large screen to display.
•  Up to five monitors can be aligned in both the longest and 
shortest directions.
•  Each monitor displays enlarged views of separated images.
(Example) 
Longest direction: 2 monitors 
Shortest direction: 2 monitors 
Longest direction: 3 monitors
Shortest direction: 2 monitors
Setting procedure
In the ENLARGE menu, set ENLARGE H/V and  
ENLARGE-POS H/V. (See page 8.)
1.   Set the number...

E10
Menu Items
Caution
• Do not switch off the main power after setting the 
SCHEDULE.
•  Specify the correct date and time. (See page 7.) 
SCHEDULE does not function unless the date and time are 
specified.
•  Check regularly that the set date and time are correct.
•  When the SCHEDULE is set, the setting of STANDBY 
MODE is disabled. (The current power consumption will be 
the same as when STANDARD is set.)
TIPS
• Up to 8 SCHEDULE items can be registered.
•  Setting the SCHEDULE flashes the power LED...