Sharp Pn S525 Operation Guide

PN-S525
LCD MONITOR 
 
 
OPERA TION GUIDE 
 

2E
This guide contains instructions regarding operation, settings, and simi\
lar details.
For instructions regarding connection and installation, refer to the inc\
luded Operation Manual.
Manual Scope
-  Microsoft, Windows and Internet Explorer are registered trademarks of Mi\
crosoft Corporation.
-   HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC.
-    Adobe, Acrobat, and Reader are either registered trademarks or trademarks of...

3E
Basic Operation
1 
2  3 
4 
5 
6 
7 
8
1. INPUT (Input mode selection)
The menu is displayed. Press 
 or  to select the input 
mode, and press 
 to enter.
*  You can select the input terminal by pressing the input 
switch of the monitor.
Input mode VideoAudio
PC1 DVI-D
*1PC1 input terminal
PC audio input 
terminal
PC2 HDMI
*2PC2 input terminal
PC3 D-SUB PC3 input terminal
PC4 RGB
*3PC4 input terminals
AV1 DVI-D
*1AV1 input terminal
AV audio input 
terminals
AV2 HDMI
*2AV2 input terminal
AV3 COMPONENT...

E4
Basic Operation
n Switching the screen size
Even when the screen size is changed, the display may remain the same de\
pending on the input signal.
WIDEPC input
Displays image so it fills the entire screen.
AV input An image with a 4:3 aspect ratio is stretched to fill the entire 
screen.
ZOOM 1
PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen 
without changing the aspect ratio. The edges of the image may be 
cut off.
AV input
ZOOM 2
PC input Use this size if ZOOM 1 cuts...

5E
Menu Items
Displaying the menu screen
Video and audio adjustment and settings of various functions 
are enabled. This section describes how to use the menu 
items. See pages 6 to 8 for details of each menu items.
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
1. 
Press MENU to display the menu screen.
1920x1080 
V: 60 Hz    H: 66.3 kHz
AUT O 
CLOCK 
PHASE 
H-POS 
V -POS 
H-SIZE 
V -SIZE 
H-RESOLUTION 
V- RESOLUTION 
RESET 
SCREEN 
PICTURE  AUDIO 
SETUP  
OPTION  
ENLARGE  PIP/PbyP...

E6
Menu item details
The menu will differ depending on the input mode.
nSCREEN
AUTO (PC3/PC4)
The CLOCK, PHASE, H-POS, and V-POS are automatically 
adjusted.
Pressing  
 
performs adjustment.
Use this automatic adjustment when you use the PC3 input 
terminal or PC4 input terminals to display a PC screen for 
the first time or when you change the setting of the PC. (See 
page 10.)
CLOCK (PC3/PC4)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of...

E7
nSETUP
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
MONITOR
Select the installation direction of the monitor.
LANDSCAPE
 ............Horizontal orientation
PORTRAIT  ...............Vertical orientation
LANGUAGE
Sets the display language for the menu screen.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted 
automatically according to the screen size control signal 
included in the video signal...

E8
Menu Items
TIPS
• When WHITE BALANCE is set to THRU, BLACK LEVEL, 
CONTRAST, TINT, COLORS and GAMMA cannot be set.
•  If COLOR MODE is set to sRGB or VIVID, the following 
items cannot be set. 
WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY 
TO USER, and GAMMA
nDual screen display
You can display the screens of the PC input signal and AV 
input signal simultaneously.
Set this function with “PIP MODES” in the PIP/PbyP menu.
PIPMain screen 
Sub 
screenA sub screen is displayed 
inside a main screen....

E9
Menu Items
n Enlarge
• 
You can align several monitors and integrate them into a 
single large screen to display.
•  Up to five monitors can be aligned in both the horizontal 
and vertical directions.
•  Each monitor displays enlarged views of separated images.
(Example)
Horizontal direction: 2 monitor s
Ve rtical direction: 2 monitor s
Horizontal direction: 3 monitor s
Ve rtical direction: 2 monitor s
Setting procedure
In the ENLARGE menu, set ENLARGE H/V and  
ENLARGE-POS H/V. (See page 8.)
1.  Set...

E10
Menu Items
(5) INPUT
Specifies the input mode at power-on. When not specifying, 
the screen at the previous power-off appears.
Input modes displayed on “PC1/AV1” depend on DVI 
SELECT settings.
Input modes displayed on “PC2/AV2” depend on HDMI 
SELECT settings.
Input modes displayed on “PC4/AV3” depend on BNC 
SELECT settings.
Caution
• Do not switch off the main power after setting the 
SCHEDULE.
•  Specify the correct date and time. (See page 7.) 
SCHEDULE does not function unless the date and time...