Sharp Pgf212xl Manual

7
Introduction
15. OverloadingDo not overload wall outlets, extension cords, or
integral convenience receptacles as this can
result in a risk of fire or electric shock.
16. Object and Liquid EntryNever push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
17. ServicingDo not attempt to service this product yourself as
opening or removing covers...

8Observe the following safeguards when setting up your
projector.
Caution concerning the lamp unit
■
Potential hazard of glass par-
ticles if lamp ruptures. In case
of lamp rupture, contact your
nearest Sharp Authorized
Projector Dealer or Service
Center for replacement.
See “Regarding the Lamp” on
page 
52 .
Caution concerning the setup of the
projector
■For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from
humidity, dust and...

9
IntroductionCaution regarding usage of the projector
■If you are not to use the projector for a long
time or before moving the projector, make
certain you unplug the power cord from the
wall outlet, and disconnect any other cables
connected to it.
■If the power cord is unplugged while the
cooling fan is running, some parts of the
projector may still be hot. Use caution when
handling the projector.
■Do not carry the projector by holding the lens.
■When storing the projector, ensure you at-
tach the lens...

10
Accessories
Remote control
Two R-6 batteries
 (“AA” size, UM/SUM-3,
HP-7 or similar)
Power cord*RGB cable
(10' (3.0 m))

Optional accessories
■Lamp unit
■Ceiling-mount adaptor
■Ceiling-mount unit
■Remote receiver
■3 RCA to mini D-sub 15 pin cable (10n (3.0 m))AN-F212LP
AN-60KT
AN-XRCM30 (for U.S.A. only)
AN-TK201 
AN-TK202 
AN-EP101B 
(for U.S.A. only)
AN-MR2
AN-C3CP2
Supplied accessories
For U.S. and
Canada, etc.
(6' (1.8 m))
For Europe,
except U.K.
(6' (1.8 m))
For U.K. and
Singapore...

11
Introduction
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
Projector
Pa rt Names and Functions
28
38
50
29
29
26
27
15
49
49
26
45
3225
25, 50
38, 48
25, 50
38
Top View
STANDBY/ON
b utton
For turning the
power on and
putting the
projector into
standby mode. Lamp indicator
T emperature warning
indicator
Adjustment buttons
( P /R /O /Q )
For selecting menu items.
V
OL (Volume) buttons
(– O /Q +)
For adjusting the
speaker sound level.
ENTER button
For...

12
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
Rear View
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for
instructions on how to use it to secure the projector.
Pa rt Names and Functions (Continued)
27
34
22
22
21
22
23
23
23
23
24
24
21
22
Terminals
A UDIO 2 input
terminal
S-VIDEO input terminal
Te
rminal for...

13
Introduction
29
32
33
34
38
32
32
25
34
28
33
32
25
33
29
32
34
38
38
48
30
38
29
33
34
STANDBY button
For putting the projector
into the standby mode.
BREAK TIMER  button
For displaying the
break time. COMPUTER, DVI,
S-VIDEO, VIDEO buttons
For switching to the
respective input modes.
PAGE UP/PAGE
DOWN buttons
Same as the [Page Down] and
[Page Up] keys on a computer
keyboard, when with the USB
connection (using a USB cable
or the optional remote
receiver).
POINTER button
For displaying the
pointer....

14
•Danger of explosion if battery is incorrectly replaced.
Replace only with alkaline or manganese batteries.
•Insert the batteries making sure the polarities correctly match the m and n marks inside the battery
compartment.
•Batteries of different types have different properties, therefore do not mix batteries of different types.
•Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
•Remove the batteries from the remote control once they have...

15
Introduction
Usable Range
The remote control can be used to control the
projector within the ranges shown in the
illustration.
Note
•The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control
•Ensure that you do not drop it or expose it to
moisture or high temperature.
•The remote control may malfunction under a
fluorescent lamp. In this case, move the...

16
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than a computer, see
pages 22 and 23.
3. Remove the lens cap and turn the projector on 2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
On the projector On...