Sharp Pgf212xl Manual
Here you can view all the pages of manual Sharp Pgf212xl Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
Introduction Quick StartSetupConnections Basic Operation Useful Features Appendix OPERATION MANUAL DATA PROJECTOR MODEL PG-F212X-L
Page 2
ii IMPORTANT •For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. •Before recycling the packaging, please ensure that you have checked the con- tents of the carton thoroughly against the list of “Supplied accessories” on page 10.Model No.: Serial No.:
Page 3
iii SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporat- ing a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being...
Page 4
iv The supplied CD-ROM contains operation instructions in English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese and Chinese. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch, Schwedisch, Por tugiesisch und Chinesisch. Bitte lesen Sie die Bedienungsanleitung vor der Verwendung des Projektors sorgfältig durch. Le CD-ROM fourni...
Page 5
1 IntroductionBefore using the projector, please read this operation manual carefully. There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or...
Page 6
2 Caution Concerning Lamp Replacement See “Replacing the Lamp” on page 52. This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 pixels (micromirrors). As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect...
Page 7
3 Introduction 38 Menu Selections (Adjustments) Example: Adjusting “Bright”.•This operation can also be performed by using the buttons on the projector.Press MENU/HELP.•The “Picture” menu screen for the se- lected input mode is displayed.Example: “Picture” screen menu for COMPUTER (RGB) input Press Q or O and select “Picture” to adjust. 1 2 Menu item Picture Mode Contrast 0 0 0BrightStandard SEL./ADJ. ENTER END0 0 Red BlueCLR Temp BrilliantColorTMC.M.S. Setting C.M.S. Lamp Setting0 1On Bright DNROff...
Page 8
4 Contents Preparing Introduction How to Read this Operation Manual.... 3 Contents ............................................... 4 IMPORTANT SAFEGUARDS ............... 6 How to Access the PDF Operation Manuals .............................................. 9 Accessories ........................................ 10 Pa rt Names and Functions ................. 11 Projector............................................... 11 Rear View ............................................. 12 Inserting the Batteries...
Page 9
5 Introduction Reference Appendix Maintenance....................................... 49 Maintenance Indicators...................... 50 Regarding the Lamp........................... 52 Lamp..................................................... 52 Caution Concerning the Lamp............ 52 Replacing the Lamp............................. 52 Removing and Installing the Lamp Unit.......................................... 53 Resetting the Lamp Timer.................... 54 Storing the...
Page 10
6 1. Read InstructionsAll the safety and operating instructions should be read before the product is operated. 2. Retain InstructionsThe safety and operating instructions should be retained for future reference. 3. Heed WarningsAll warnings on the product and in the operating instructions should be adhered to. 4. Follow InstructionsAll operating and use instructions should be followed. 5. CleaningUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use...