Sharp Mx6240n User Guide

31SPECIFICATIONS
TypeColor scanner
Scan resolution (main × vertical) 100 × 100 dpi, 150 × 150 dpi, 200 × 200 dpi, 300 × 300 dpi,
 
400 × 400 dpi, 600 × 600 dpi (push scan)
50 to 9,600 dpi *1 (pull scan)
Scan speed   
(8-1/2" × 11" (A4)) B/W: 
50 sheets/minute (one-sided)
Color:  50 sheets/minute (one-sided)
   
When in standard mode using Sharp standard paper (8-1/2" × 11" (A4) size 
with 6% coverage) and the auto color detector is turned off. The speed varies 
depending on the data...

32
SUPPLIES
SUPPLIES
Standard supplies for this product that can be replaced by the user include paper
, 
toner cartridges, and staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher staple 
cartridge, and transparency film.
Supply of spare parts and consumables 
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which 
may...

33
OPTIONS
Optional Units
When optional units are installed, finishing operations such as stapling, punching or folding, can be performed.
With full installation options
15
6
2 7
3 8
4
1  Folding Unit
2  Finisher/Saddle Finisher
3  Finisher/Saddle Stitch Finisher
4  Curl Correction Unit 5 
This Unit
6  Multi Bypass Tray
7  Paper Pass Unit
8  LCT
OPTIONS   

34OPTIONS
Punch Module
Punches copies and outputs them automatically to the tray.
Punch Module (3 holes)
MX-PN12BPunch Module (3 holes)
MX-PN13B
•  50 sheets: for saddle stitch 
finisher or finisher
•  100 sheets: for saddle stitch finisher 
(large stacker) or finisher
Folding Unit
Each set of copies can be folded.
Folding Unit
MX-FD10
• Half Fold
•  Z-Fold
•  C-Fold
•  Accordion Fold
•  Double Fold
Finisher/Saddle Stitch Finisher
Each set of copies can be stapled, or the sheets can be folded and...

35
Inserter
Inserts a sheet of paper into a specific page as an insertion sheet.
Inserter
MX-CF11
• 200 sheets x 2
Large Capacity Trays
You can drastically reduce the time to load the large number of paper.
Large Capacity Tray
MX-LC12 Large Capacity Tray
MX-LCX3N
•  A4 size paper can be set. • A3 size paper can be set.
Large Capacity Trays
MX-LC13
•  LCT (2 trays)
Curl Correction Unit
Perform the curl correction of the output.
Curl Correction Unit
MX-RB15
• Curl Correction Unit
OPTIONS   

36
This function is used to forward all data sent and received by the machine to a specified desti-
nation (Scan to E-mail address, Scan to FTP destination, Scan to Network Folder destination, 
or Scan to Desktop destination). This function can be used by the administrator of the machine 
to archive all sent and received data. To configure the document administration settings, click 
[Application Settings] and then [Document Administration Function] in "Settings mode". (Admin -
istrator rights...

37
Noise emission values
The following shows noise emission values as measured according to ISO7779.
Sound power level L
WAd 
MX-6240NMX-7040N
Operating 7.8 B 7.8 B
Standby - -
Sound pressure level LpAm
MX-6240N MX-7040N
Operating 59 dB 60 dB
Standby - -
Emission density
Measured chemicalsMachine statusColor modeDiffusion rate
Ozone
OperatingColor
-
B/W 1.5 mg/h or less
Dust Color
-
B/W 4.0 mg/h or less
Styrene Color
-
B/W 1.0 mg/h or less
Benzene Color
-
B/W Less than 0.05 mg/h
TVOC Color
-
B/W 10 mg/h...

MX-6240N/MX-7040N
SHARP ELECTRONICS CORPORATION
S H A R P  E L E C T R O N I C S   O F   C A N A D A  LT D .PRINTED IN CHINAXXX
2012C
TINSE5023FCZZ
h t t p : / / w w w . s h a r p u s a . c o m
1 Sharp Plaza, Mahwah, New Jersey 07495-1163.
335 Britannia Road East, Mississauga, Ontario, L4Z 1W9
SHARP CORPORATION
QUICK START GUIDE
This manual has been printed using a vegetable-based soy oil ink to help protect the environment.