Sharp MX 6201N User Manual

							19
Loading paper in other trays
Tray 1 and Tray 2
To change the paper size of tray 1 and tray 2, see TRAY SETTINGS FOR TRAY 1 AND TRAY 2 in the Users 
Guide.
Paper guide
Tr a y  1
Insert the paper with the print side face 
up.
Tr a y  2
Raise the paper guide.
Insert the paper with the print side face 
up.
Return the paper guide to its original 
position after loading the paper.
Fan the paper well before inserting it. 
Otherwise, multiple sheets may feed at 
once and cause a misfeed.
                  Indicator line
The indicator line indicates the maximum 
height of the paper that can be loaded in 
the tray. When loading paper, make sure 
that the stack is not higher than the 
indicator line.
Tr a y  1
Tr a y  2
Gently pull out the paper tray.
Gently push the tray into the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							20
Bypass tray
Place paper that is A5 (7-1/4 x 10-1/2) or smaller 
in the horizontal orientation.Only the address side of envelopes can be printed on. 
Place envelopes with the address side face down.
Special types of paper that cannot be loaded in other trays can be loaded in the bypass tray.
For detailed information on the bypass tray, see LOADING PAPER IN THE BYPASS TRAY in the 
Users Guide.
When loading A3W, A3, or B4 size paper, pull out 
the tray extension.
The maximum number of sheets that can be loaded 
in the bypass tray is approximately 100 for plain 
paper and approximately 20 for envelopes.
The side to be 
copied on must 
be face down!
Example: Loading an envelope
Downloaded From ManualsPrinter.com Manuals 
						

							21
Large capacity tray
MX-LCX2
The paper size of tray 5 (MX-LCX2) can only be changed by a service technician.
Gently pull out the paper tray.
Gently push the tray into the machine. Insert the paper with the print side face 
down.
Fan the paper well before inserting it. 
Otherwise, multiple sheets may feed at 
once and cause a misfeed.
                  Indicator line
The indicator line indicates the maximum 
height of the paper that can be loaded in 
the tray. When loading paper, make sure 
that the stack is not higher than the 
indicator line.
Downloaded From ManualsPrinter.com Manuals 
						

							22
MX-LCX3
To change the paper size of tray 5 (MX-LCX3), see CHANGING THE PAPER SIZE (MX-LCX3) in the Users 
Guide.
Paper table
Insert the paper with the print side face 
down.
When a certain amount of paper is placed 
on the paper table, the paper table will 
automatically descend slightly and then 
stop. Continue loading paper in this way.
Fan the paper well before inserting it. 
Otherwise, multiple sheets may feed at 
once and cause a misfeed.
Before pulling the tray out, press the 
operation button.
The operation button indicator will blink. 
Pull out the tray after the operation 
button indicator turns off.
Gently push the tray into the machine.
The operation button indicator will blink. 
Pull out the tray after the operation 
button indicator turns off.
Gently pull out the paper tray.
                  Indicator line
The indicator line indicates the maximum 
height of the paper that can be loaded in 
the tray. When loading paper, make sure 
that the stack is not higher than the 
indicator line.
When placing paper, do not 
insert your fingers into the 
openings in the paper table.
Warning
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Copying
23
This section explains the basic procedures for using the copier function. 
This section also introduces the various types of copying that can be 
performed using the special modes.
XBASE SCREEN OF COPY MODE . . . . . . . . . . . . . . . . . 24
XMAKING COPIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
X2-SIDED COPYING (Automatic Document Feeder)  . . 26
XCOPYING ON SPECIAL PAPER (Bypass Copy) . . . . . 27
XMAKING COLOUR COPIES (Colour Mode) . . . . . . . . . 29
XSELECTING THE EXPOSURE AND IMAGE TYPE  . . . 30
XFITTING THE COPY IMAGE TO THE PAPER 
(Automatic Ratio Selection) . . . . . . . . . . . . . . . . . . . . . 31
XENLARGEMENT/REDUCTION (Preset Ratios / 
Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
XINTERRUPTING A COPY RUN (Interrupt Copy) . . . . . 35
XSTORING COPY OPERATIONS (Job Programs)  . . . . 36
XSPECIAL MODES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
XSELECTING A SPECIAL MODE . . . . . . . . . . . . . . . . . . 39
XCONVENIENT COPY FUNCTIONS . . . . . . . . . . . . . . . . 40
Downloaded From ManualsPrinter.com Manuals 
						

							24
BASE SCREEN OF COPY MODE
Touch the [COPY] key in the touch panel to open the base screen of copy mode.
Select copy settings in the base screen.
(1) Mode Select keys
Use these keys to switch between copy, image send, 
and document filing modes.
To switch to copy mode, touch the [COPY] key.
(2) Various messages are displayed here.
The icon of the selected mode appears on the left.
(3) [Colour Mode] key
Touch this key to change the colour mode.
(4) Output display
When one or more output functions such as sort, 
group, staple sort, or saddle stitch have been 
selected, this shows the icons of the selected 
functions.
(5) [Exposure] key
This shows the current copy exposure and exposure 
mode settings. Touch this key to change the 
exposure or exposure mode setting.
(6) [Copy Ratio] key
This shows the current copy ratio. Touch this key to 
adjust the copy ratio.
(7) [Original] key
Touch this key to enter the original size manually.
When an original is placed, this key shows the 
automatically detected original size. If the original size 
is set manually, the set size appears.
(8) [Paper Select] key
Touch this key to change the paper (tray) that is used. 
The tray, paper size, and paper type will appear. The 
tray images in the paper size display can be touched 
to open the same screen.(9) Original feed display
This appears when an original is inserted in the 
automatic document feeder.
(10) Paper select display
This shows the size of paper loaded in each tray and 
the amount of paper remaining  .
The selected tray is highlighted.
(11) Number of copies display
This shows the number of copies set.
(12) [Special Modes] key
Touch this key to select special modes such as 
Margin Shift, Erase, and Dual Page Copy.
(13) [2-Sided Copy] key
Touch this key to select the 2-sided copying function.
(14) [Output] key
Touch this to select an output function such as sort, 
group, offset, staple sort, saddle stitch, or punch.
(15) Customized keys
The keys that appear here can be changed to show 
settings or functions that you prefer.
IMAGE SENDDOCUMENT
FILING COPY
Colour ModeSpecial Modes
Plain2-Sided Copy
Output
File
Quick File
Ready to scan for copy.
Copy Ratio
0
A33.1.2.5.A4A4
OriginalPaper SelectAuto
A4
PlainAutoA4
Full Colour
ExposureAutoB44.
A4
A4
100%
(10)(9)
(8) (1)
(2)
(3)
(5)
(6)
(7)
(11)
(15)
(12)
(13)
(14)(4)
Downloaded From ManualsPrinter.com Manuals 
						

							25
MAKING COPIES
This is the most basic procedure for making copies.
1Touch the [COPY] key.
The base screen of copy mode appears.
2Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
3Set the number of copies and then press the 
[COLOUR START] key or the [BLACK & WHITE 
START] key.
1-sided original1-sided copy
Colour ModeSpecial Modes
Plain2-Sided Copy
Output
File
Quick FileCopy Ratio100%
A33.1.2.A4A4
OriginalPaper SelectAuto
A4
PlainAuto
Full Colour
ExposureAutoB44.
A4
IMAGE SENDDOCUMENT
FILING COPY
Ready to scan for copy.0
The side to be scanned must be face up!
or
Cancel copyingCancel scanningCorrect sets
Downloaded From ManualsPrinter.com Manuals