Sharp Lc60eq10u Maintenance Manual

							39
3 Press ENTER to start checking the data in the USB 
memory device.
Insert the USB memory device 
containing the software update file.
OK
4  During the data checking, “Checking” blinks.
Now checking the data 
in the USB memory device.
Checking
•  The current version of the TV software and the version 
of the update fi le on the USB memory device are 
displayed.
Example
Software update file is detected 
in the USB memory device.
Start update?
NoYe sCurrent Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2
•  If the USB memory device is not properly installed or 
the correct update fi le cannot be found on the USB 
memory device, an error message is displayed.
  Check the fi le on the USB memory device, and then 
reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
OK
There is more than one software file in the USB memory device.
Confirm that only the software update file is 
in the USB memory device.
OK
On-Screen Display Menu
5  To update the TV software with the update fi le, 
select “Yes”, and then press ENTER.
Software update file is detected 
in the USB memory device.
Start update?
NoYe sCurrent Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2
Example
30% Now updating
Update Version                  :  UXXXXXX2
Do not unplug AC cord. Remote Control operation is disabled during Update process.
CAUTION
•Do not remove the USB memory device or unplug 
the AC cord while the software is being updated.
6  When the software is successfully updated, a 
screen is displayed indicating that the update 
process is completed.
  After this screen is displayed, the TV automatically 
turns off and then turns on again.
Example
Software update is complete.
OK Update Version                  :  UXXXXXX2
•  If the update has failed, check the fi le in the USB 
memory device and try Software Update again.
Failed to complete update.
Retry Software Update.
If system Update fails again,
contact the customer service center.
OK Update Version                  :  UXXXXXX2
7  After the screen shown below is displayed, press 
ENTER.
System software was 
successfully updated.
Remove the USB memory device.
OK
8  Remove the USB memory device.
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							40
Enjoying Photo/Music/Video Playback
You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy 
viewing pictures, listening to music, and watching videos.
•  Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the 
recorded data.
•  It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains 
many fi les or folders.
•  Use only alphanumeric characters for naming fi les.
•  File names over 80 characters (may vary depending on character set) may not be displayed.
Connecting a USB Memory Device/USB Hard Drive
Insert the USB memory device with recorded photos, music or videos into the USB 1 or USB 2 terminal on the TV.•  If USB memory devices are inserted into both terminals, the USB 1 terminal has priority.
or
•  When connecting a USB hard drive, be sure to use a hard drive with an AC adapter.
•  Do not remove a USB memory device or memory card from the TV while transferring fi les, using the slide show function, or 
switching screens, or before you exit "USB" from the INPUT list.
•  Do not insert and remove a USB memory device/USB hard drive to and from the TV repeatedly.
•  When using a card reader, be sure to insert Memory fi rst before using the card reader.
•  USB input cannot be selected when displaying the browser. Close the browser fi rst.
CAUTION
•  Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV.
• Using a USB extension cable with the USB memory device may prevent the TV from performing correctly.
Connecting a Home Network (DLNA) Server
Connect the TV to the home network (DLNA) server using an ETHERNET cable.•  You can also connect a Home Network (DLNA) server by using a wireless LAN.
Home network (DLNA) serverETHERNET cable
Router
•  Do not disconnect a home network (DLNA) server from the TV while transferring files, when a screen is switching to another or 
before you exit "Home Network (DLNA)" from the INPUT list.
•  Do not connect and disconnect a home network (DLNA) server from the TV repeatedly.
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							41
Selecting the Folders to Play Back
•  To play back data on a USB memory device, insert the 
USB memory device on the TV. USB mode is selected 
automatically. (Go to step 2)
•  Use the following procedure to switch back to USB mode 
after switching from USB mode to another mode.
1   Select "USB" or "Home Network (DLNA)" from 
INPUT list screen.
2   Press D.
3   Press a
/
b (or c
/d
) to select the drive/server 
where you want to fi nd your fi les, and then press 
ENTER.
•  For USB mode, select the drive.
•  When in DLNA mode, select the server.
4   Press c
/d
 to select "Photo", "Music" or "Video", 
and then press ENTER.
Music
Photo
Video
Example
5   Press c
/d
 to select the desired folder, and then 
pressENTER.
•  The Media screen can be displayed even by using the 
application window. To display the application window, 
pressSmartCentral. (See page 21.)
•  You cannot switch the input mode if a USB memory device 
is not connected.
•  You do not need to select the drive/server in step 2 when 
there is only one drive in the connected USB memory 
device or there is only one home network (DLNA) server 
connected to the TV.
•  16 is the maximum number of USB drives and 10 is the 
maximum number of home network (DLNA) servers that 
can be displayed.
•  If the TV is turned off and then on again, the number 
assigned to the USB drive may change.
•  "VIEW MODE" is fi xed during the Photo or Music mode. 
During "Video mode", you can select "Auto" or "Original".
•  The key guide display disappears automatically after a 
particular time has elapsed. To display the key guide 
display again, press DISPLAY.
USB Device Compatibility
USB device USB Memory, USB card reader (Mass 
Storage class), USB hard drive
File system FAT/FAT32/NTFS (USB hard drive only)
Photo fi le 
formatJPEG (.jpg) (DCF2.0 compliant)
Music fi le 
formatMP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video fi le format
File
extensionContainer Video Audio
.avi AVI
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4
Motion JpegMP3
Dolby Digital
LPCM
ADPCM
.mkv MKV
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4MP3
Dolby Digital
LPCM
ADPCM
.asf
.wmvASF
DivX 3.11/4.x/5.1/6.0XviD
MPEG4
VC-1
Windows Media Video v9
MP3
Dolby Digital
LPCM
WMA
.mp4
.mov
.3gpMP4
(SMP4)H.264
MPEG4
Motion JpegMP3
AAC
.vro
.mpg
.mpegPSMPEG2
MPEG1Dolby Digital
MPEGLPCM
•  Progressive format jpeg fi les are not supported.
•  USB 1.1 devices may not be played properly.
•  Operation using USB hubs is not guaranteed.
•  Some video fi le formats may not be played depending on 
the fi le.
•  Some images may not be displayed in the appropriate 
aspect ratio depending on the fi le format.
Home Network (DLNA) Server Compatibility
Photo fi le formatJPEG
Music fi le formatLPCM, MP3
Video fi le formatMPEG2-PS, MPEG2-TS,
WMV, ASF, MP4, MOV, AVI
•  Progressive format jpeg fi les are not supported.
•  Some video fi le formats may not be played depending on 
the fi le or the server.
Enjoying Photo/Music/Video Playback
-$-&6@@@-&6@$6@&@JOEE


-$-&6@@@-&6@$6@&@JOEE








 
						

							42
Enjoying Photo/Music/Video Playback
Playing Back Files on a USB Memory 
Device/Home Network (DLNA) Server 
Photo Mode
Viewing Thumbnails
... ...picture 5picture 4picture 2picture 1picture 3
Example
This screen image is for the USB mode. It may be slightly 
different in the Home network (DLNA) mode.
Buttons for thumbnail operations
Buttons Description
a/
b/
c/
dSelect a desired item.
ENTERWhen selecting a folder icon:
Enter this directory.
When selecting a photo thumbnail:
Enlarge the photo.
RETURNReturn to the previous process.
A (red)USB mode:
Select the images to be displayed. Press 
this button to add or remove a checkmark.
Home Network (DLNA) mode:
Display the Media screen.
B (green)Display the music list screen. You can select 
the background music to be played for the 
slide show.
C (blue)*Start the slide show.
D (yellow)Display the USB MENU/Home Network 
(DLNA) Menu screen.
* This function is available only for the USB mode.
•  When there are invalid photo fi les, the X mark will be 
displayed for the fi le. (USB mode only.)
•  You can see the fi le name, shooting date, fi le size and pixel 
size of the selected photo in the lower-left corner of the 
screen (shooting date is only available in the EXIF fi le format).
Viewing Individual Photos
The photo selected on the thumbnail selection screen 
is displayed.
Buttons for individual display operation
Buttons Description
c/
dGo to the previous/next photo in the same 
directory.
RETURNReturn to the thumbnail selection screen.
A (red)Rotate the photo by 90 degrees to the left.
B (green)Rotate the photo by 90 degrees to the right.
•  Rotating photos only applies to the temporarily selected 
item and this setting is not saved.
•  The key guide display disappears automatically after a 
particular time has elapsed. To display the key guide 
display again, press DISPLAY.
Slide Show
The photos displayed on the thumbnail selection 
screen are displayed as a slide show.
Buttons for slide show operation
Buttons Description
RETURNReturn to the thumbnail selection screen.
D (yellow)Display the USB MENU/Home Network 
(DLNA) Menu screen.
•  The selected BGM is played repeatedly.
•  The slide show continues until you press RETURN.
•  For setting the slide show speed, select "Select Slide Show 
Interval" on the USB MENU/Home Network (DLNA) Menu 
screen.
•  The key guide display disappears automatically after a 
particular time has elapsed. To display the key guide 
display again, press DISPLAY.
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							43
Enjoying Photo/Music/Video Playback
USB Menu
On the menu to be displayed in USB mode, use 
a
/
b to select an item and make settings to your 
preferences.
Remove USB Device
[10sec] Select Slide Show Interval
Select Slide Show BGM
Set All Slide Show Image
Reset All Slide Show ImageUSB MENU
Example
■ Select Slide Show Interval
Specify the length of time before the next image 
appears.
Press
a
/
b to select the desired length of the time, and 
then press ENTER.
5sec/10sec/30sec/60sec
•  For DLNA mode, follow the same procedure.
•  Depending on the photo fi les, the length of the slide show 
interval may differ from the selected interval time.
■ Select Slide Show BGM
The music list screen appears when you select "Select 
Slide Show BGM".
You can select the music to be played in the 
background while the slide show is being displayed.
1   Select the music you want to play from the music 
list.
•  For operations on the music list screen, see "Music 
Mode".
2   Press RETURN to display the thumbnail selection 
screen, and then press C to start the slide show 
and the background music.
•  All of the music fi les are selected by default.
■ Set/Reset All Slide Show Image
Selecting "Set All Slide Show Image" or "Reset All 
Slide Show Image" will display the thumbnail selection 
screen. On the screen, set or reset the images to be 
displayed in the slide show.
Set All Slide Show Image: Checkmarks are added to all 
the images.
Reset All Slide Show Image: Remove all the 
checkmarks from all the images.
■Remove USB Device
To remove the USB device properly, use c
/d
 to 
select "Yes" and then press ENTER.
Music Mode
... ...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP33:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
This screen image is for the USB mode. It may be slightly 
different in the Home network (DLNA) mode.
Buttons for music mode
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERWhen selecting a folder icon:
Enter this directory.
When selecting a music fi le:
Play music.
RETURNReturn to the previous process.
A (red)USB mode:
Select the music to be played back. Press 
this button to add or remove a checkmark.
Home Network (DLNA) mode:
Display the Media screen.
B (green)Stop music.
C (blue)Play/Pause music.
D (yellow)*Display the USB MENU screen.
* This function is available only for the USB mode.
•  When there are invalid music fi les, the X mark will be 
displayed for the fi le. (USB mode only.)
•  The displayed play time may differ slightly from the actual 
play time depending on the fi les.
USB Menu
On the menu to be displayed in USB mode, use 
a
/
b to select an item and make settings to your 
preferences.
Set All Auto Play
Reset All Auto PlayUSB MENU
Remove USB Device
Example
* For details, see "Remove USB Device".
■ Set/Reset All Auto Play
Selecting "Set All Auto Play" or "Reset All Auto Play" 
will display the music list screen. On the screen, set or 
reset the music to be played back in the slide show.
Set All Auto Play: Checkmarks are added to all the 
music fi les.
Reset All Auto Play: Remove all the checkmarks from 
all the music fi les.*
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							44
Enjoying Photo/Music/Video Playback
Video Mode
... ...video 5video 4video 2video 1video 3VIDEO_01.avi
VIDEO_02.divx
VIDEO_03.divx
VIDEO_04.avi
VIDEO_05.divx
VIDEO_06.divx
VIDEO_07.avi3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
Example
This screen image is for the USB mode. It may be slightly 
different in the Home network (DLNA) mode.
Buttons for fi le selecting operations
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERWhen selecting a folder icon:
Enter this directory.
When selecting a video fi le: Play the video.
RETURNReturn to the previous process.
A (red)USB mode:
Select/deselect items (checkmarks are added 
to the selected items).
Home Network (DLNA) mode:
Display the Media screen.
D
(yellow)*Display the USB MENU screen.
* This function is available only for the USB mode.
Buttons for playing mode
Buttons Description
a
Go to the beginning of a fi le by pressing a
once and the previous fi le by pressing a
 twice.
bGo to the next fi le.
d
USB mode:
The fast forward speed changes every time you 
pressd. After playing to the end, the TV goes 
to the next fi le and starts to play.
Home Network (DLNA) mode:Jump forward in a video. *2
c
USB mode:
The reverse speed changes every time you 
pressc
. After going back to the beginning, the 
TV starts to play the same fi le.
Home Network (DLNA) mode:
Jump back in a video. *2
ENTERUSB mode:
Pause the video.
Home Network (DLNA) mode:
Play/Pause the video. *2
RETURNGo back to the fi le selection screen.
A (red)*1Jump to the scene where playback was last 
stopped.
B
(green)Stop a video.
C (blue)Display the USB/home network (DLNA) 
operation panel.
D
(yellow)*1 Display the USB MENU screen.
0-9*1 Jump to a point in the video during playback of 
a fi le without chapters.
You can jump to a later point by pressing a 
higher number.*3
*1  These functions are available only for the USB mode.
*2  Jump forward/back and play/pause may not be available 
depending on the fi les.
*3  During playback of a fi le without chapters, playback points 
are set automatically. Playback points are set at intervals of 
a one-tenth of playback time.
Example for a fi le with a playback time of 100 minutes:
Pressing1 jumps 10 minutes forward, and pressing 2 jumps 
20 minutes forward. Pressing 0 returns to the start of the fi le 
being played back.
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							45 ■ Using the operation panel
You can use the operation panel for video playback 
operations.
You can call up this operation panel by pressing 
MENU after you press a
/
b to select "USB Operation 
Panel"/"Home Network (DLNA) Operation Panel" from 
"System Options" > "View Option".
Example
Resume Audio CCTitle
jump
Buttons for using the USB operation panel
•Hold down to go in reverse.
d
Starts playback.
ŒHold down to fast forward.Video without chapters: Press one time to 
return to the previous playback point.* Press
two times to return to the previous fi le.
Video with chapters: Press one time to return 
to the previous chapter. Press two times to 
return to the previous fi le.
)Sets pauses and still pictures./Video without chapters: Press one time to 
advance to the next playback point.* Press two 
times to display the next fi le.
Video with chapters: Press one time to advance to the 
next chapter. Press two times to display the next fi le.
Audio Change the audio when multiple audio is 
available for the video you are watching.
+Playback stops.
CC Change the Closed Caption display.
Title Displays the title (edition).
Resume
jumpJump to the scene where playback was last 
stopped.
* During playback of a fi le without chapters, playback points 
are set automatically. Playback points are set at intervals of a 
one-tenth of playback time.
Example for a fi le with a playback time of 100 minutes:
Playback points are set every 10 minutes. Pressing 
/one time after viewing the fi le for 15 minutes jumps to the 
20-minute playback point.
•  Reverse/fast forward continues from one fi le to another 
during continuous playback.
•  Use "CC" on the operation panel to change the Closed 
Caption display. You can also switch the Closed Caption 
display by using "System Options" > "View Option" > 
"Change CC" or by pressing CC on the remote control unit.
•  Use "Audio" on the operation panel to change the audio. 
You can also switch the audio by using "System Options" > 
"View Option" > "Change Audio".
Buttons for using the Home Network (DLNA) 
operation panel
dStarts playback.Go to the beginning of a fi le by pressing once 
or to the previous fi le by pressing twice.
)Sets pauses and still pictures./Go to the next fi le.+Playback stops.
Jump back in a video.
Jump forward in a video.
USB Menu
On the menu to be displayed in USB mode, use 
a
/
b to select an item and make settings to your 
preferences.
Menu for fi le selecting operations
Set All Auto Play
Reset All Auto PlayUSB MENU
Remove USB Device
Example
*  See page 43 for details on the Remove USB Device 
function.
■Set/Reset All Auto Play
Selecting "Set All Auto Play" or "Reset All Auto Play" 
will display the video list screen. On the screen, set or 
reset the video to be played back in the slide show.
Set All Auto Play: Checkmarks are added to all the 
video fi les.
Reset All Auto Play: Remove all the checkmarks from 
all the video fi les.
Menu for playing mode
Chapter
Show Video Information
Title (Edition)USB MENU
Remove USB Device
Example
*  See page 43 for details on the Remove USB Device 
function.
■ Title (Edition)/Chapter
Selecting "Title (Edition)" or "Chapter" will display a list 
of titles/chapters contained in the video fi le. Select the 
title or chapter you want to play back.
•  The selected title or chapter is played back.
•  "0-9" is displayed for fi les without chapters. Playback 
jumps to the playback point of the selected number.
•  If there is Edition information, this screen is displayed when 
the title is selected.
•  If there is no title or edition, you cannot select "Title 
(Edition)".
•  "Chapter" cannot be selected when there is no chapter.
■ Show Video Information
The information of the current fi le is displayed.
*
*
Enjoying Photo/Music/Video Playback
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							46
DivX® Setup
This is the function to confi rm your registration code. 
You need to register the code at http://www.divx.com.
1PressMENU to display the menu screen.
2Pressc
/d
 to select "Initial Setup", and then press 
ENTER.
3Pressa
/
b to select "DivX® Setup", and then 
pressENTER.
■ DivX
® VOD registration
You can fi nd your registration code on this menu. You
need to register the TV at http://www.divx.com before 
playing the DivX content.
■DivX
® VOD deregistration
You can fi nd your deregistration code on this menu. 
You need to deregister the TV at http://www.divx.com 
to release the registration.
•  This function is available only for the USB mode.
•  This function may not work while an Internet application is 
being used.
Enjoying Photo/Music/Video Playback
-$-&6@@@-&6@$6@&@JOEE


-$-&6@@@-&6@$6@&@JOEE








 
						

							47
Presetting Remote Control Function
You can operate the connected AV products (AV 
receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, 
LD) using the presetting manufacturer function of your 
remote control unit.
14 12 11 6
13 10 8
9 7
54 32 1
Presetting manufacturer codes
1   Press an appropriate button (STB,DVD•VCR or 
AUDIO) to operate the connected equipment.
2   Press an appropriate button (STB,DVD•VCR or 
AUDIO) and DISPLAY at the same time to enter 
the code registration mode.
3   Press 0–9 to enter the manufacturer code. (See 
page 48.)
•  Preset mode is fi nished once the LED no longer lights 
up.
4   After registering the code, the LED will stop blinking 
then turn off after one second. (If you perform an 
incorrect operation, the LED will blink quickly then 
turn off.)
Operating the Connected Equipment
To operate the connected equipment, press STB,
DVD•VCR or AUDIO to select your device. (STB 
(cable/satellite set-top box), BD, DVD, VCR or AUDIO.) 
The remote control unit button will function as follows.
•  When you operate VCR, BD or DVD, press INPUT to select 
the terminal connected to your device. 
•  CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)  • Turns the connected equipment power on and off.
2,• Starts playback. (VCR, BD, DVD)
3*• Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (BD, DVD)
4+• Stops the tape transport. (VCR)
• Playback stops when pressed. With some Blu-ray disc/
DVD players, pressing the button twice may open the 
disc tray. (BD, DVD)
5.• Pressing quickly once takes you to the start of the chapter 
currently playing. Each time you press it, you move back 
to the start of the previous chapter. (BD, DVD)
6 0–9,•(DOT) (STB)• Press a button (or buttons) that corresponds to the 
channel that you wish to watch.
7-• Rapidly advances the tape and allows picture search. 
(VCR)
• Hold down to fast forward. (BD, DVD)
8)• Sets pauses and still pictures. (VCR, BD, DVD)
9/• Pressing quickly once takes you to the start of the next 
chapter. Each time you press it, you move ahead to the 
start of the next chapter. (BD, DVD)
10(REC• Starts recording. (VCR)
11 FLASHBACK• Press to switch between the current channel and the 
channel you were watching immediately before. Some 
manufacturers do not preset FLASHBACK. (STB)
12CH
U/
V• Press CHU or CHV to tune in to a higher or lower 
channel. (STB)
• Press to select the channel of the TV tuner on the VCR. 
(VCR)
13 MENU• When this button is pressed, the BD/DVD menu will 
display. (BD, DVD)
14a/
b/
c/
d,ENTER•
a/
b/
c/
d: Press the button to select items on the STB 
GUIDE screen or STB MENU screen. (STB)
  Press the button to select items on the BD/DVD menu 
screen. (BD, DVD)
•ENTER: Press to activate the selected function. (STB, 
BD, DVD)
Other Viewing Options
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC








 
						

							48
Manufacturer codes Other Viewing Options
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY  WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA09
13
04
12
04
09
10, 13, 14
04
04
04
09, 16, 17, 22
09
04, 05, 06
12
04
02
09
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
09
10
09
REMOTE CONTROL CODE 
NUMBER VCR BRAND
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH24
31
36
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
REMOTE CONTROL CODE 
NUMBER BD/DVD/LD BRAND
•  Depending on the brand, the codes of some BD players 
may not be supported.
ANVISION
CABLE STAR
DISH NETWORK
DIRECTV
EAGLE
G.INSTRUMENT
GERROLD
JERROLD
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH04, 05
04, 05
39, 40
41
05
02, 03, 10, 11, 17, 20
17
02, 03, 10, 11, 12, 20, 
25-34
04, 05, 08, 12, 15, 16, 
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
07
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
06, 35
REMOTE CONTROL CODE 
NUMBER STB BRAND
•  Numbers marked with * are SAT codes, all others are STB 
codes.
SHARP
SHARP (SOUND BAR)01
02
AUDIO BRANDREMOTE CONTROL CODE 
NUMBER
-$-&6@@@-&6@$6@&JOEC


-$-&6@@@-&6@$6@&JOEC