Sharp Lc60eq10u Maintenance Manual

LC-80LE633U   LC-70/60/52LE640U   LC-70/60/52C6400U  OPERATION MANUAL    MODE D'EMPLOI    MANUAL DE OPERACIÓN
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-F419WJN1
12P03-MX-NM
ENGLISH FRANÇAIS ESPAÑOL
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
IMPORTANT  :  Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE  :...

*1  Active area/Área activa/Zone active*2  Thinnest part/Parte más delgada/Partie la plus mince
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
LC-52LE640U/LC-52C6400U LC-60LE640U/LC-60C6400U
AN-52AG4
AN-52AG4
479/16 (1208)
3023/64 (771)
29
3/32 (739)
25
33/64
(648.0)
*1
161/2 (419)
4523/64(1152.0)*1
 13 1/8 (333) 5
41/64(143)2
27/32 (72) 1
3/64 (26.4)*2
21/64 (51)
13
19/32 (345) 15
25/64 (391)
5° 153/4 (400)
 15 3/4 (400)11
17/64 (286)
43/64 (17)
815/32 (215) 21
7/64 (536)
4...

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: 
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user 
to the presence of important 
operating and...

INFORMATION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference...

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleaning the product. To ensure your safety 
and prolong the service life of your Liquid Crystal Television,...

IMPORTANT SAFETY INSTRUCTIONS
4
•  Outdoor Antenna Grounding — If an outside antenna is 
connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70, 
provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location...

IMPORTANT SAFETY INSTRUCTIONS
5
Caring for the front panel
•  Turn off the main power and unplug the AC cord from the wall outlet before handling.
•  Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.).
  To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry 
sheet type cloth, etc.). This may damage the surface of the front panel.
•  Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
•...

6
Contents
•The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from 
the actual operations.
•The examples used throughout this manual are based on the LC-70LE640U model.
IMPORTANT INFORMATION .............................  1-2
DEAR SHARP CUSTOMER .................................... 3
IMPORTANT SAFETY INSTRUCTIONS .............  3-5
Supplied Accessories............................................. 7
QUICK REFERENCE
Attaching the Stand...

7
1Confi rm that there are 12 screws (8 long screws 
and 4 short screws) supplied with the stand unit.
21Set the post for the stand unit onto the 
polystyrene foam.
2Attach the base to the post.
3Insert and tighten the 8 screws into the 8 holes 
on the bottom of the base.
•  Hold the stand unit securely with one hand, and then 
tighten the screws.
FRONT
2
3
1
1
Long
screws
3Insert the stand into the openings on the bottom of the TV.
•  Make sure that the stand is fi rmly inserted into the TV. 
Improper...

8
Experiencing HD Images
An HDTV without an HD source is just an ordinary 
TV.
To enjoy HD images on the TV, you should get 
HD programming from the following:
•  Over-the-air broadcasting via HD quality antenna
•  HD cable/satellite subscription
•  HD compatible external equipment
•  For information on updating to HD programming, ask your 
cable/satellite service provider.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the 
remote control sensor on the TV. Objects...