Sharp Lc32lb370u Maintenance Manual

27
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Connecting headphones
1Connect the headphones to the /AUDIO OUT jack on the back of your TV. 
2In the screen that opens, press 
W or X to highlight Headphones/Audio Out, then press ENTER. For more information, 
see “Selecting the audio out mode” on page47.
Warning
Loud noise can damage your hearing. When using headphones, use the 
lowest volume setting on your headphones that still lets you hear the sound.
Notes
• If you connect headphones when your...

28
 LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar to the digital audio jack.
Digital audio
1Make sure that your TV’s power cord is unplugged and the external speaker system or sound bar is turned off.
2Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV and to 
the optical AUDIO IN jack on the external speaker system or sound bar.
3Plug your TV’s...

29
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Analog audio
When you connect external speakers or a sound bar to the  /AUDIO OUT jack, the T V speakers are muted.
1Make sure that your TV’s power cord is unplugged and the external speaker system or sound bar is turned off.
2Connect an audio cable (not provided) to the /AUDIO OUT jack on the back of your TV and to the AUDIO IN jacks on 
the external speaker system or sound bar.
3Plug your TV’s power cord into a power outlet, then turn on your TV....

30
 LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Connecting a home theater system with multiple 
devices
The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that 
came with your devices for connection information.
Just remember to use the best connection types available for the best picture and sound. For information about connection 
types, see “What connection should I use?” on page13.
AV  r e c e i v e r
Antenna or cable T V...

31
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Connecting power
1Connect the AC power cord to the AC IN connector on the back of your TV.
2Connect the other end of the cord to a power outlet.
Caution
• Your TV should only be operated from the power source indicated on 
the label.
• Always unplug the AC power cord from the power outlet when you will 
not be using your TV for an extended period of time. 

32
 LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Using the remote 
control
Installing remote control batteries
1While pressing the release latch on the back of the remote 
control, lift the battery compartment cover off of the 
remote control.
2Insert two AAA batteries into the battery compartment. 
Make sure that you match the + and – symbols on the 
batteries with the + and – symbols in the battery 
compartment.
3Replace the battery compartment cover.
Aiming the remote control
• Point the...

33
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Programming universal remote controls
You can operate your Sharp TV with a new or existing universal 
remote control.
1See the table in “Viewing universal remote control codes” 
for common codes. If you have problems programming 
your remote or need a different remote control code, see 
the instructions that came with the remote control or check 
the remote control manufacturer’s website for the latest 
remote control code information. 
2Follow your...

34
 LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Turning on your TV for 
the first time
The first time you turn on your TV, the Easy Setup wizard opens. 
The wizard guides you through setting up basic settings.
1Make sure that you have:
• Installed the remote control batteries. (See page 32 for 
details.)
• Connected an antenna, cable TV, or satellite TV. (See page 
14 through 18 for details.)
• Connected the power cord. (See page 31 for details.)
2Press   (power) to turn on your T V.
3Press 
S...

35
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
9Press W X or ENTER to highlight Hour, Minute, or the 
AM/PM field, then press 
S or T adjust the option. When 
you are finished, use the arrow buttons to highlight Next, 
then press ENTER.
10Press 
S or T to highlight a video input source, then press X 
to move to the label area.
11Press 
S or T to highlight a preset label or Custom.
12If you select a preset label, press ENTER. The video input 
box on the left is selected so you can label a...

36
 LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Understanding the 
basics
Turning your TV on or off
1Make sure that the power cord is connected to a power 
outlet. See “Connecting power” on page31.
2Press  POWER to turn on your TV. The power indicator 
turns blue.
3Press  POWER again to turn off your TV. Your TV enters 
standby mode, and the power indicator turns red.
Selecting the video input source
1Turn on your T V, then press INPUT.
2Press 
S or T to select a video input source, then press...