Sharp Lc M3700 Operation Manual

US
50
PC Operation (Continued)
Other control options
ID NUMBER ID NO. SETTINGIDST W 0 - 255 It sets the monitors ID number.
R 0 - 255 It returns the monitors ID number.
IDSL W 1 - 255Sets a monitor ID number. This ID number is only effective for the command
immediately after this command.
0 Clears the ID number if one has been designated.
IDLK W 1 - 255Sets a monitor ID number. This ID number is effective for the next and all
subsequent commands after this command.
0 Clears the ID number if one has been...

51 US
PC OperationSettings and
Adjustments
Settings and Adjustments
Picture
Contrast
Adjustable range0 - 40
Default30
+ directionFor more contrast
– directionFor less contrast
Black Level
Adjustable range–30 - +30
Default0
+ directionBrightens entire video signal
– directionDarkens entire video signal
Color (Video/S-video/COMPONENT)
Adjustable range–30 - +30
Default0
+ directionFor more color intensity
– directionDecreases color intensity (Monochrome at “0”)
Tint (Video/S-video/COMPONENT)
Adjustable...

US
52
Advanced: Color Temp (Video/S-video/INPUT 3 COMPONENT)
Adjustable rangeHigh, Mid-High, Mid, Mid-Low, Low
DefaultMid
UpwardEntire image bluish tone (color temperature increases)
DownwardEntire image reddish tone (color temperature decreases)
Advanced: Black (Video/S-video/INPUT 3 COMPONENT)
Adjustable rangeOff, High, Low
DefaultLow
OffNo Adjustment
HighFor high detail in black portions
LowFor low detail in black portions
Advanced: 3D-Y/C (Video)
Adjustable rangeStandard, Fast, Slow
DefaultStandard...

53 US
Settings and
Adjustments
Green (PC (analog)/INPUT3(RGB))
Adjustable range–30 - +30
Default0
+ directionBrightens green component
– directionDarkens green component
Blue (PC (analog)/INPUT3(RGB))
Adjustable range–30 - +30
Default0
+ directionBrightens blue component
– directionDarkens blue component
Audio
Treble
Adjustable range–15 - +15
Default0
+ directionFor stronger treble
– directionFor weaker treble
Bass
Adjustable range–15 - +15
Default0
+ directionFor stronger bass
– directionFor weaker...

US
54
Setup
Control Lock: Lock Item (See page 58 for details.)
Function
Adjustable rangeLock/Unlock (“Menu Display”, “Remote”, “Buttons”, “Power” and “RS-232C”)
DefaultUnlock (all items)
LockThe pertinent function is disabled when a PIN is set (see page 58).
UnlockThe pertinent function can be used, even if a PIN is set.
Control Lock: PIN (See page 58 for details.)
FunctionSets 4-digit PIN
After a PIN has been set, it becomes effective when the menu is closed.
If a PIN is temporarily canceled (see page...

55 US
Settings and
Adjustments
Auto Sync.: Start Now
FunctionIf “Yes” is selected and the ENTER button is pressed when applicable video is input,
the system automatically optimizes position, phase and clock using the video signal
which is currently being input.
Adjustable rangeYes/No (“No” is always the default value)
Position: H-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range–10 - +10
Default0
+ directionImage shifts right.
– directionImage shifts left.
Position: V-pos. (Video/S-video/INPUT 3...

US
56
Picture Flip
Adjustable rangeNormal/Mirror/Upside Down/Rotate
DefaultNormal
NormalNormal image
MirrorMirror image
Upside DownUpside down image
RotateRotated image
Language
FunctionSelects display language setting.
Adjustable rangeJapanese, English, German, French, Spanish
DefaultEnglish
INPUT2 Select
FunctionSelects INPUT2 terminal use.
Adjustable rangeInput/Output
DefaultInput
InputUsing as Input
OutputUsing as Output
Note:(This setting cannot be switched when INPUT2 is currently being...

57 US
Settings and
Adjustments
Option
Wide Mode (Video/S-video/INPUT 3 COMPONENT) (see page 63 for details.)
Adjustable range
Normal, Full 14:9, Zoom 14:9, Panorama, Cinema 14:9, Cinema 16:9, Full and Underscan
DefaultPanorama
Note:Available when receiving a 480i, 576i, 480p or 576p image.
Wide Mode (INPUT 3 COMPONENT)
Adjustable rangeFull, Underscan
DefaultFull
Note:Available when receiving 1080i or 720p image
Wide Mode (INPUT3 (RGB)/PC (analog/digital)) (see page 62 for details.)
Adjustable...

US
58
Detailed explanation
Control lock
Overview
This monitor is equipped with a control lock function to prevent third parties from changing the
operating state. Locked functions cannot be used unless a PIN is input.
PINs can be freely set by the user.
The following types of operation can be locked.
»Menu Display
When locked, MENU buttons on the remote control and monitor are disabled.
»Remote Control
When enabled buttons on the remote control except STANDBY/ON are locked.
»Monitor Buttons
When enabled...

59 US
Settings and
Adjustments
»PIN+xxxx (“xxxx” is the current PIN.)
This command temporarily releases current lock.
“+” indicates repeater control for the PINP command. (
 Repeater control)
»PCLRxxxx (“xxxx” is the current PIN.)
It reverts to the state where no PIN has been set.
This is the same as “PIN Clear” under “Control Lock” on the “Setup” menu. (“Permanent unlock-
ing”)
»PCL+xxxx (“xxxx” is the current PIN.)
It reverts to the state where there is no PIN.
“+” indicates repeater control for the...