Sharp LC-70C8470U, LC-60C8470U, LC-70C7450U, LC-60C7450U HDTV Owners Guide

							29
On-Screen Display Menu
AV MODE (Changing Pic.Quality)
The audio and video settings can be changed to suit 
the program or input content being watched.
Select from the following AV modes.
■
When the input source is TV, COMPONENT, 
VIDEO 1 or 2:
AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/
DYNAMIC(Fixed)
■When the input source is PC IN or HDMI 1 to 4:LC-70C8470U/LC-60C8470U
AUTO/STANDARD/MOVIE/GAME/PC/USER/x.v.Color/
DYNAMIC/DYNAMIC(Fixed)
LC-70C7450U/LC-60C7450U
AUTO/STANDARD/MOVIE/GAME/PC/USER/DYNAMIC/
DYNAMIC(Fixed)
•  The selectable items vary depending on the input source.
•  For details of the selectable items in 3D mode, see page 
48.
•  You can select AV MODE by pressing AV MODE on the 
remote control unit. See page 24 for details of AV MODE 
settings.
OPC Setting
Automatically adjusts the brightness of the screen.Off:The brightness is fi xed at the value set in "Backlight".
On: Automatically adjusts.
On:Display:Displays the OPC effect on the screen while 
adjusting the brightness of the screen.
•When set to "On", the Optical Picture Control (OPC) 
senses the surrounding light and automatically adjusts 
the backlight brightness. Make sure nothing obstructs 
the OPC sensor, which could affect its ability to sense 
surrounding light.
•When set to "On:Display", OPC effect displays on the 
screen while the OPC adjusts the screen brightness.
OPC:
OPC:
Advanced Picture Settings
This TV provides various advanced functions for 
optimizing the picture quality.
C.M.S.
(Color Management System)
Color tone is managed using the six-color adjustment 
setting.
C.M.S.-Hue:This is a standard to adjust the color either 
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the 
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
•For resetting all adjustment items to the factory preset 
values, press a/
b to select "Reset", and then press ENTER.
Picture Settings
Adjusts the picture to your preference with the 
following picture settings.
MenuPicture
Settings
AV MODE (Changing Pic.Quality)[STANDARD]OPC[On:Display]
[Middle]
Backlight[b5]a16
b16
Contrast[b30] 0
b40
Brightness[0]
a30b30
Color[b2]a30b30
Tint[0]a30
b30
Sharpness[b2]a10
b10
Advanced
Picture Settings
3D Brightness Boost
Example
1 Press MENUto display the MENU screen, and then 
press
c/
d to select "Picture Settings".
2 Press 
a/
bto select a specifi c adjustment item.
•  Select "Advanced" and then press ENTER to set   "C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value", 
"Color Gamut Range" (for LC-70C8470U/
LC-60C8470U), "Color Temp.", "Motion Enhancement", 
"Quad Pixel Plus 2" (for LC-70C8470U/LC-60C8470U), 
"Active Contrast", "Gamma Adjustment", "Black Level", 
"Film Mode", "Digital Noise Reduction", "Monochrome" 
or "Range of OPC".
3 Press 
a/
b(or
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
Selected item
cbutton
dbutton
BacklightThe screen dims The screen 
brightens
ContrastFor less contrast For more contrast
BrightnessFor less 
brightnessFor more 
brightness
ColorFor less color 
intensityFor more color 
intensity
TintSkin tones 
become reddishSkin tones 
become greenish
SharpnessFor less 
sharpnessFor more 
sharpness
•  You can select "3D Brightness Boost" while in 3D mode. 
(See page 48.)
•  For resetting all Picture adjustment items to the factory 
preset values, press 
a/
b to select "Reset", press ENTER,
press
a/
b to select "Yes", and then press ENTER.
-$@$6@6@&@JOEE


-$@$6@6@&@JOEE








 
						

							30
Color Gamut Range (for LC-70C8470U/LC-60C8470U)
You can set the color gamut range.Standard: Standard color gamut.
Expanded:More vivid colors with expanded color gamut.
•  "Color Gamut Range" is only available when AV MODE is 
set to "MOVIE" or "MOVIE (3D)".
Color Temp. 
(Color Temperature)
For a better white balance, use color temperature correction.High:White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:   White with reddish tone
White balance can be adjusted between a maximum of 
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI)
■Fine tuning the color temperatureTo fi ne tune the color temperature, set "10 Point Setting" 
to "On".
You can adjust the "Position" setting. Adjust the set color 
temperature from +1 to +10.
White balance can be adjusted between a maximum of 
+30 and a minimum of –30 for each color temperature.
•  When "Position" is set to "10", you can adjust the white 
balance between –30 and 0.
•
For resetting all adjustment items to the factory preset 
values, press a/
b to select "Reset", and then press ENTER.
Motion Enhancement
Use Motion Enhancement to view fast-action video 
more clearly.
■ LC-70C8470U/LC-60C8470U
AquoMotion480: Turn the LED backlight on or off for 
240Hz drive display.
AquoMotion240: Turn the LED backlight on or off for 
120Hz drive display.
120Hz High/120Hz Low: For obtaining a clearer image.
Off:Normal image.
■ LC-70C7450U/LC-60C7450UAquoMotion240: Turn the LED backlight on or off for 
120Hz drive display.
120Hz High/120Hz Low: For obtaining a clearer image.
Off:Normal image.
•  "Motion Enhancement" may cause image noise. If this 
occurs, turn the function "Off".
•  When AV MODE is set to "GAME" or "PC", or PC format is 
being input, "Motion Enhancement" is not available.
Quad Pixel Plus 2 (for LC-70C8470U/LC-60C8470U)
Smoothes diagonal lines by detailed dot control.Advanced:Produces smoother diagonal lines by jaggy
removal process.
Standard: Produces smooth diagonal lines.Off:No adjustment.
Active Contrast
Automatically adjusts the image contrast according to 
the scene.
On:Automatically adjusts the image contrast.
Off:No adjustment.
On-Screen Display Menu
Gamma Adjustment
Adjusts the differences of picture tones between bright 
parts and dark parts. The adjustment range of the 
gamma can be set to a maximum of +2 and a minimum 
of –2 by pressing 
c or 
d.
Black Level
Adjusts on-screen black level to your preferred level.High: The black level gets brighter.
Low:The black level gets darker.
•"Black Level" is available for input signal from Composite 
Video, Component 480i and analog broadcasts (air and 
cable).
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally 
encoded at 24 frames/second), analyzes it then recreates 
each still fi lm frame for high-defi nition picture quality.
Advanced: Adjust effect to reduce judder from fi lm 
contents. Select a desired level of judder reduction 
from 0 to +10.
Standard: Detects, analyzes, converts fi lm source.
Off:Normal viewing mode.
•"Film Mode" does not function depending on input signal 
type.
•  "Film Mode" does not function when you set AV MODE to 
"GAME" or "PC".
•"Standard" does not function when channel display shows 
an input signal resolution of 480p, 720p, or 1080p.
Digital Noise Reduction
Produces a clearer video image.
Auto:Automatically adjusts the level of noise reduction.
High/Middle/Low:Select a desired level for viewing a 
clearer video image.
Off:No adjustment.
•  "Digital Noise Reduction" is not available when you set AV 
MODE to "PC" or PC format is being input.
•  When AV MODE is set to "GAME", "Auto" is not available.
Monochrome
For viewing a video in monochrome.
On:For viewing in monochrome.
Off:Normal color.
Range of OPC
The brightness level range of the OPC sensor's automatic 
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to 
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
•The "Range of OPC" settings are active only when "OPC" 
is set to "On".
•The maximum setting cannot be set to a smaller number 
than the minimum setting. 
•The minimum setting cannot be set to a bigger number 
than the maximum setting. 
•Depending on the brightness of the surrounding light, the 
OPC sensor might not operate if the adjustment range is 
small.
-$@$6@6@&@JOEE


-$@$6@6@&@JOEE








 
						

							31
On-Screen Display Menu
Audio Settings
You can adjust the sound quality to your preference 
with the following settings.
Example
[Off]Clear Voice
MenuAudio
Settings
Auto Volume
[Off]
Bass[0]a15
b15
Treble[0]a15b15
Balance[    0] L
R
3D Surround[Off]
Bass Enhancer[On]
Reset Audio Settings
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Audio Settings".
2 Press 
a/
b to select a specifi c adjustment item.•  Select "Auto Volume", "3D Surround", "Bass Enhancer" 
or "Clear Voice", and then press ENTER to set each 
item.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
Selected item
cbutton
dbutton
TrebleFor weaker treble For stronger treble
BassFor weaker bass For stronger bass
BalanceDecrease audio 
from the right 
speakerDecrease audio 
from the left 
speaker
•Audio menu is grayed out when "Output Select" is set to 
"Variable". (See page 34.)
•For resetting Audio adjustment items to the factory preset 
values, press 
a/
b to select "Reset", press ENTER, press 
a/
b to select "Yes", and then press ENTER.
Auto Volume
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High:Reducing the loudness gaps among different 
sound sources strongly.
Middle:
Low:Reducing the loudness gaps among different 
sound sources slightly.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 34.)
3D Surround
The surround function produces Surround effect from 
the speakers.
3D Stadium: Reproducing lifelike experience of 
excitements such that live sports or concert 
performances in a stadium create.
3D Hall: Reproducing concert hall experience with 
realistic live surround sound using measured 
reverberant sound in the concert hall.
3D Movie: Reproducing movie theater experience 
with realistic live surround sound using measured 
reverberant sound in the movie theater.
3D Standard: Creating 3 dimensional surround sound 
with detailed control of the signal phase.
Normal: Providing mild surround sound.
Off: Outputs the normal sound.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 34.)
•For some discs, setup may be required on your BD/DVD 
player. In this case, please refer to the operation manual of 
your BD/DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.On:Bass Enhancer function is on.
Off:Normal sound.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 34.)
Clear Voice
This function emphasizes speech against background
noise for greater clarity.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 34.)
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							32
Power Control
Power control setting allows you to save energy.
Power
ControlMenu
Audio Only
No Signal Off Power Saving
No Operation Off
[Disable][Enable] [    Standard]
Power Control
Example
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Power Control".
2 Press 
a/
b to select a specifi c adjustment item, 
and then press ENTER.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
•  Skip this step for "Audio Only".
Audio Only
When listening to music from a music program, you 
can turn the screen off and enjoy audio only.
On:Audio is output without screen image.
Off:Both screen images and audio are output.
•The screen image will return to normal when a button 
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
On-Screen Display Menu
Power Saving
This function allows you to set the Power Saving level 
in order to decrease the power consumption and 
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video 
content. When set to "Standard", "" appears on the 
screen.
Advanced: Optimizes power reduction based upon video 
content and engages OPC. When set to "Advanced", 
"
" appears on the screen.
Off: This function does not work.
•"Power Saving" does not function when you set AV MODE 
to"AUTO" or "DYNAMIC (Fixed)".•You cannot select a different Power Saving item for each 
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV 
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set to 
"Standard", then the "Power Saving" setting will change 
to "Advanced".
—When you change the "Power Saving" setting from 
"Advanced" to "Off" or to "Standard", "OPC" will be set 
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
•
When "Power Saving" is set to "Standard" or "Advanced", 
the Power Saving leaf icon appears to the left of "OPC" in 
the Picture Settings menu screen.
•  "Power Saving" is not available when the TV is in 3D mode.
No Signal Off
This function allows the TV to automatically shut the 
power down when there is no signal received.
Enable: The power will automatically shut down if there is 
no signal for 15 minutes.
Disable: This function does not work.
A confirmation screen appears.
Yes:The setting will be changed.
No: The setting will not be changed.
•When it is 5 minutes before the power shuts down, the 
remaining time will start to keep appearing every minute.
•When a TV program fi nishes, this function may not operate.
No Operation Off
This function allows the TV to automatically shut the 
power down when there is no operation.
Enable: The power will automatically shut down if there is 
no operation for 3 hours.
Disable: This function does not work.
A confirmation screen appears.
Yes:The setting will be changed.
No: The setting will not be changed.
•When it is 5 minutes before the power shuts down, the 
remaining time will start to keep appearing every minute.
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							33
On-Screen Display Menu
System Options
Menu
View Option System Options
3D Setup
Terminal Setting AQUOS LINK Setup
Menu Design
Operation Lock Out
[Off]
Icon Light Up Setting
Demo ModeSystem
Options[On]
Example
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "System Options".
2 Press 
a/
b to select a specifi c adjustment item and 
then press ENTER.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit. 
View Option
These functions are useful for adjusting the audio 
and video settings. The View Option functions can be 
operated with the remote control unit.
APPS
The application window can be displayed by selecting 
"APPS" on the MENU screen.
•  You can display the application window by pressing 
SmartCentral on the remote control unit. (See page 24.)
View Mode
This function changes the screen size. 
Select "View Option" on the menu to display the View 
Mode menu screen. 
The View Mode menu varies depending on the input source.
•  You can select View Mode by pressing VIEW MODE on 
the remote control unit.
— See page 26 for adjusting the video being input from a 
TV, other audiovisual equipment, USB-Video, DLNA-
Video or Internet applications.
—
See page 66 for adjusting the video being input from a PC.
Freeze
Allows you to capture and freeze a moving image that 
you are watching.
• You can select Freeze by pressing FREEZE on the remote 
control unit. See page 23 for details of Freeze function.
Change Audio
Allows you to change the audio when multiple audio is 
available for the program you are watching.
• You can change Audio by pressing AUDIO on the remote 
control unit. See pages 24 to 25 for details of Audio 
function.
Change CC
Allows you to change the Closed Caption display.
Select "Change CC" on the menu to display the Closed 
Caption information.
•  The information displayed varies depending on the program 
you are watching.
•  You can change Closed Caption by pressing CC on the 
remote control unit. See page 25 for details of Closed 
Caption function.
Terminal Setting
Audio Setup
You can output digital audio to an AV amplifi er or 
similar device whose DIGITAL AUDIO INPUT terminal 
is connected to the DIGITAL AUDIO OUTPUT terminal 
on the TV. Please select an audio output format 
compatible with the audio format of the program you 
are watching and the equipment connected.
PCM:Set to "PCM" when connecting to equipment that 
does not support Dolby Digital. The same audio (main, 
sub, or main/sub) as the audio of the program being 
viewed is output.
  2-channel audio with a sampling rate of 48 kHz or less 
is output as linear PCM audio.
Bitstream:Set to "Bitstream" when connecting to an 
audio system that supports Dolby Digital. Audio is 
output through both the main and sub channels.
•  Analog channel audio and video input audio are output in 
PCM mode even when "Bitstream" is selected.
•  PCM digital input signals are output in PCM mode even 
when "Bitstream" is selected.
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							34
Input Skip
This setting allows you to skip the TV, HDMI or PC IN 
Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3" 
and "HDMI 4") on the Input Selection operation.
Yes: Skips the input.
No: Does not skip input.
Input Label
Lets you set the input terminal displayed when using 
the INPUT list or channel display. Press 
a/
b/
c/
d to 
select the new name for the input mode.
•  Using the software keyboard, you can enter up to 
10 characters for text. (See page 73.)
•You cannot change labels if the input source is TV, Home 
Network (DLNA) or USB.
HDMI Setup
To watch an HDMI or PC IN equipment image, select 
"HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the 
INPUT list using INPUT on the remote control unit or 
on the TV.
Auto View: 
Enable: To use View Mode based on signal 
recognition, including an HDMI signal.
Disable:No function.
•Refer to your external equipment operation manual for the 
signal type.
•When connecting a DVI-HDMI conversion adapter/cable to 
the HDMI terminal, the image may not come in clearly.
Output Select
Allows you to select what controls the audio output.
Fixed:Sound via speaker is adjusted with VOL
k/
l on 
the remote control unit or on the TV.
  Sound via the AUDIO OUT terminal is not adjustable 
and outputs at a consistent level.
Variable: Sound via the AUDIO OUT terminal is adjusted 
withVOL
k/
l on the remote control unit or on the TV.
  Sound via speaker is muted.
Color System
Select the video signal system compatible with your 
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
•"Color System" can only be set for the VIDEO 1 or 2.•If you have already set the Secret No., input the 4-digit 
secret number here. See page 37 for setting a secret 
number.
Menu Design
Channel Selecting Effect
You can select whether to use transition effects when 
changing channels.
Yes: A transition effect is used when the channel is 
changed.
No:No function.
•  In some cases, "Channel Selecting Effect" does not work.
Program Title Display
Select the CH display when changing channels for 
digital broadcasting.
Yes:"Program Info." displays.
No:"Program Info." does not display.
Position
For adjusting a picture's horizontal and vertical 
position.
H-Pos.:Centers the image by moving it to the left or 
right.
V-Pos.:Centers the image by moving it up or down.
•For resetting adjustments to the factory preset values, 
press
a/
b to select "Reset", and then press ENTER.
•When connecting a PC to the HDMI terminal, the image 
position will be automatically adjusted. It cannot be 
manually adjusted.
•The screen position variable ranges depend on the View 
Mode or the signal type. The ranges can be seen on the 
position-setting screen.
•Adjustments are stored separately according to input 
source.
•  "Position" does not work when USB mode, Home Network 
(DLNA) mode or an Internet application is used.
•  You may not be able to adjust the position while in 3D 
mode.
Caption Setup
This function allows you to adjust the closed caption 
screen appearance to suit your preference. You can 
adjust 7 items: "Caption Size", "Font Style", "Foreground 
Color", "Foreground Opacity", "Background Color", 
"Background Opacity" and "Character Edge".
Example:
Selectable items available for "Font Style".
Default:The font specifi ed by broadcasting station or 
default font.
Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
Type 6: Cursive font type.
Type 7: Small capitals.
•For resetting adjustments to the factory preset values, 
press
a/
b to select "Reset", and then press ENTER.
•The default value depends on the broadcasting station.
On-Screen Display Menu
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							35
Game Play Time
This function displays the elapsed game time so you 
do not lose track of the time. To display the elapsed 
time, select "GAME" for the AV MODE before starting 
the game.
On:The elapsed time is displayed every 30 minutes when 
you switch to GAME mode in external input mode.
Off:No adjustment.
Operation Lock Out
This function locks the operation buttons on the TV 
and the remote control.
Off:No adjustment.
RC Control Lock: All buttons on the remote control are 
locked.
Button Control Lock: All buttons on the TV, except 
POWER, are locked.
When “RC Control Lock” or “Button Control Lock” is 
selected, a confi rmation screen appears.
Yes:Locks the operation buttons.
No: No adjustment.
•  To unlock the buttons on the remote control by using the 
control panel of the main unit (see page 27):
1PressMENU to display the MENU screen, press
VOL
k/
l to select "System Options", and then press
INPUT.
2PressCHU/V to select "Operation Lock Out", and
 then press INPUT.
3 Press CHU/V to select "Off", and then press INPUT.
4 Press MENU to exit.
•To unlock the buttons on the TV, press MENU on the 
remote control, and then select "Off" in "Operation Lock 
Out".
Icon Light Up Setting
When this function is set to "On", the LED on the front 
of the TV turns on.
•  The LED lights white in 2D mode.•  The LED lights blue in 3D mode.
•  "On" is the factory preset value. If you want to turn off the 
LED, set the function to "Off".
Demo Mode
You can select the image from several types of demo 
mode.
■ LC-70C8470U/LC-60C8470U
Quattron/Quad Pixel Plus 2/AquoMotion480/
SmartCentral/3D/Feature Demo/Auto Play
■ LC-70C7450U/LC-60C7450UAquoMotion240/SmartCentral/Feature Demo/
Auto Play
If you have selected "Auto Play", you need to select the 
desired playback type(s), and then set the playback time.
 Continuous: Play Demos continuously.
 10 min.: Play Demos every 10 minutes.
 20 min.: Play Demos every 20 minutes.
•This function will be canceled when you press EXIT on the 
remote control unit.
•When "Demo Mode" is set to "Quattron" or "Feature 
Demo", pressing FREEZE pauses/restarts demo.
•"Demo Mode" may not be selected depending on input 
signal type or application status.
•"Demo Mode" may be automatically canceled depending 
on input signal type.
On-Screen Display Menu
-$@$6@6@&@JOEE


-$@$6@6@&@JOEE








 
						

							36
Initial Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX® Setup Broadcasting Setup
Individual Setup
Wall Mount Audio Setup
Initial SetupInitial
Setup
[No] [English]Reset
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Initial Setup".
2 Press 
a/
b to select a specifi c adjustment item, 
and then press ENTER.
•  When you select "EZ Setup", "CH Setup", "Parental 
CTRL" or "Reset", you can enter the 4-digit secret 
number here. See page 37 for setting a secret number.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting up the 
preset channels.
Language:Select from among 3 languages (English, 
French and Spanish).
Location & Time: Make settings for the country, area 
and time zone where you use the TV.
Select your country: Select either "United States", "Canada" 
or "Mexico".
Select your time zone: Select your time zone. The available 
settings differ depending on the selected country.
Select DST (Daylight Savings Time): Select "Auto", "Manual" 
or "Off".
TV Location: Select "Home" or "Store" for the location 
where you plan to install the TV. This product qualifi es 
for ENERGY STAR in Home mode default setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is 
set to "STANDARD".
Store:
"Power Saving" is set to "Off" and AV MODE is set to 
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" 
regardless of whether Picture Reset is "On" or "Off". If you 
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" 
if there is no operation for 30 minutes. When "Off" is 
selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings 
are completed, the Feature Demo screen is displayed if 
there is no operation for several minutes.
•  ENERGY STAR qualifi cation is based on AV MODE 
"STANDARD".
Antenna & Cable/STB: Select the type of connection 
you will use to watch TV.
Air/Cable:Make sure what kind of connection is made 
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for 
all channels viewable in the set area.
•  If "Cable" is selected for Antenna setting, scrambled 
channels are removed after the Channel search has been 
completed.
Network:When you connect to the Internet on the TV, 
confi rm the connection method and make adjustments.
•  Wireless LAN connection is possible only when the WPS 
(push button) method is used. If any other method is used, 
make settings by Initial Setup > Internet Setup > Network 
Setup. (See page 71.)
Completed:The settings confi rmation screen is displayed. 
Confi rm the information displayed on the screen.
•See Initial Installation on pages 19 to 22 for setting each item.•If no channel is found, confi rm the type of connection 
made with your TV and try "EZ Setup" again.
•If you select "Analog Search Start" and initiate the channel 
search, the CH Memory for Cable Digital will be deleted.
Broadcasting Setup
CH Setup
If Initial Installation does not memorize all the channels 
in your region, follow the instructions below to manually 
memorize the channels.
Air/Cable:Make sure what kind of connection is made 
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for 
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each 
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and 
DIGITAL (Cable).
On:Skips channels. (Channel selection disabled using CH
U/
V.)
Off:Does not skip channels. (Channel selection enabled using 
CH
U/
V.)
Remove Scrambled CH: This function makes the TV 
look for and then delete digital cable channels that 
are scrambled and so unavailable in the set area. The 
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
•See Initial Installation on pages 19 to 22 for setting each item.•If no channel is found, confi rm the type of connection 
made with your TV and try channel search again.
•If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
On-Screen Display Menu
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							37
Favorite CH (Favorite Channel Setting)
This function allows you to program 4 favorite 
channels, in 4 different categories. By setting the 
favorite channels in advance, you can select your 
favorite channels easily.
To register your favorite channel:
  Select "Register" and then press ENTER. Press 
a/
b/
c/
d to select the position in the category, and then press 
ENTER to register.
To delete your favorite channel:
  Select "1 Data Clear" and then press ENTER. Press 
a/
b/
c/
d to select the channel you want to delete, and 
then press ENTER. Select "Yes" and then press ENTER.
  To delete all the favorite channels, select "All Data Clear".
•Before setting the channel, select the channel you want to 
register as a favorite channel.
•You can display the "Favorite CH" screen by pressing 
FAVORITE CH on the remote control.
Antenna Setup-DIGITAL
In order to receive digital air broadcasts, you need 
a digital broadcast antenna. You can confi rm the 
antenna confi guration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of 
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel 
is displayed. The signal information is based on the 
current channel.
Channel Strength: Input the 2-digit channel number 
to check the signal strength of the selected channel. 
Make sure the signal is strong enough for each 
channel.
•  This function is available for DIGITAL (Air) only.
Language
You can also select a language from the Initial Setup 
menu. Select from among 3 languages: English, 
French and Spanish.
Wall Mount Audio Setup
This selects the optimal audio for the program you are 
currently watching even when the TV is mounted to a 
wall.
Yes:Selects the optimal audio.
No:No adjustment.
Reset
If complex adjustments are made and the settings 
cannot be restored to normal, you can reset the 
settings to the factory preset values.
•If you have already set the Secret No., input the 4-digit 
secret number here.
•The Channel Setup settings will not be changed.•The Language settings will not be changed.•The Secret number settings will not be changed.•The TV Location settings will not be changed.
Individual Setup
Secret No.
Allows you to use a secret number to protect certain 
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see 
pages 38 to 39):
1.Secret No. is registered.
2.V-Chip/V-Chip (DTV Only) settings have been made.•  The “V-Chip (DTV Only)” will only be selectable when a new 
rating system can be downloaded via digital broadcasting in the 
U.S.
3. "Status" is set to "On".
■Setting the Secret No.
You can set and change the secret number by using 
0-9.
Yes:Changes or sets the Secret No.
No:The confi rmation screen to clear the Secret No. 
appears when the Secret No. has been set. When the 
Secret No. has not been set, the previous screen will 
be displayed.
■Secret No. ClearYou can clear your secret number.Yes:Your secret number is cleared.
No:Your secret number is not cleared.
•As a precautionary measure, make a note of your secret 
number and keep it in a familiar place.
•If the secret number is cleared, the Status setting 
automatically sets to "Off". "V-Chip" and "Status" will not 
be selectable from the menu.
Parental CTRL
(Parental Control Setting)
Status
Used to enable or disable the parental control function. 
This function will not be selectable from the menu if 
you do not fi rst confi gure your secret number.
On:Enables Parental CTRL.
Off:Disables Parental CTRL.
On-Screen Display Menu
-$@$6@6@&JOEC


-$@$6@6@&JOEC








 
						

							38
V-Chip
V-CHIP is an electronic fi ltering device built into your 
TV. This tool gives parents a great degree of control 
over broadcasts accessed by their children. It allows 
parents to select programs judged suitable for child 
viewing while blocking ones judged not suitable. It 
does so automatically once you activate the V-CHIP 
feature in your TV. "V-Chip" and "Status" will not be 
selectable from the menu if you do not fi rst confi gure 
your secret number.
•The U.S. has two rating systems for viewing content: TV 
Parental Guidelines and movie ratings.
•The TV Parental Guidelines work in conjunction with the 
V-CHIP to help parents screen out inappropriate television 
shows from their children.
•Movie ratings are used for original movies rated by the 
Motion Picture Association of America (MPAA) as watched 
on cable TV and not edited for television. The V-CHIP can 
also be set to block MPAA-rated movies.
•The setting automatically enters "Block" for any ratings 
below your selection.
•If Status is not set to "On", the confi guration settings will 
not work.
■MPAA (Voluntary movie rating system)
   ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
PG-13
R
NC-17
X
NONE PG G
Press
a/
b to adjust the item to your desired position.
 "" indicates the item is blocked. Press MENU to exit.
G:General audiences. All ages admitted.
PG:Parental guidance suggested. Some material may not be 
suitable for children.
PG-13:Parents strongly cautioned. Some material may be 
inappropriate for children under 13.
R:Restricted. Under 17 requires accompanying parent or 
adult guardian (age varies in some jurisdictions).
NC-17:No one 17 and under admitted.
X:X is an older rating that is unifi ed with NC-17 but may be 
encoded in the data of older movies.
•Voluntary movie rating system only uses an age-based 
rating.
■ TV Parental Guidelines
   ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
TV-G
TV-PG
TV-14
TV-MA
NONE TV-Y7 TV-Y
L
S
V
FVD
Press
a/
b to adjust the item to your desired position.
"" indicates the item is blocked. Press MENU to exit.
Suggested age
TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG: Parental Guidance suggested.
TV-14: Parents strongly cautioned.
TV-MA: Mature audience only.
   Example
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
TV-G
TV-PG
TV-14
TV-MA
NONE TV-Y7 TV-Y
L
S
V
FVD
When setting an individual content-based rating item:
1 Press 
d or ENTER to access blocked content 
items from the currently selected age-based rating 
item.
2 Press 
a/
b to select an individual item, and then 
pressENTER to unblock it ("" is removed). Repeat 
the same steps for the other items.
3 Press 
c or RETURN to register after all individual 
content rating items are set.
Content
FV: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive dialog.
RatingContent
FV V S LD
Suggested
ageTV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
 : The content rating can be set, but this rating is not 
normally broadcast by TV stations.
 :  Content rating can be set.
On-Screen Display Menu
-$@$6@6@&JOEC


-$@$6@6@&JOEC