Sharp Lc 60le925 Operation Manual

 59
Using a PC
Example
Menu
View Option
Input Terminal Setting AQUOS LINK Setup
3D Setup
Menu Design
OtiLkOt System Options
System
Options
  
1   Press MENU to display the MENU screen, and then 
press 
c/
d to select System Options.
2   Press 
a/
b to select Input Terminal Setting, and 
then press ENTER.
3   Press 
a/
b to select PC input or Audio Select, 
and then press ENTER.
4   Press 
a/
b to select a speci c adjustment item, 
and then press ENTER to set each item.
5   Press 
a/
b (or 
c/
d) to...

 60
 The TV can be controlled from a PC using the RS-
232C or IP.
 Use a cross-type RS-232C cable, ETHERNET 
cable (commercially available) or wireless LAN USB 
adapter for the connections.
This operation system should be used by a person who is 
accustomed to using computers.
■ Communication conditions for IPConnect to the TV with the following settings made for 
IP on the PC.
IP protocol:TCP/IP
Host IP address:Set the IP address on the TV menu
Service:None (Do not select Telnet or SSH)
TCP port#:Set a...

 61
■ Command table Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMANDPARAMETERCONTROL CONTENTS
POWER ON COMMAND SETTING
POWER SETTINGThe Power On command rejected.
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the 
signal type. The ranges can be seen on the...

 62
Using the Internet
By connecting your TV to a broadband system, you can access the Internet from the TV.
Display the “Sidebar Widget” on the screen to check out the latest Internet information and access a range of 
useful information for AQUOS users from the original home page*.
You can use AQUOS Advantage Live to obtain the latest software and information and to view Net ix and 
VUDU videos.
You may not be able to view 3D images when accessing the Internet.
About the original home page
The original...

 63
H Using the wireless LAN USB adapter
When using the Sharp wireless LAN USB adapter (supplied), make sure that no video/audio cables or other AC 
power cords are placed close to or on the wireless LAN USB adapter, as this may interfere with the wireless 
LAN signal and limit the LAN connection quality. Try to provide as much free space around the device for best 
performance.
Be sure to turn off the TV before connecting or disconnecting the Sharp wireless LAN USB adapter.
For a wireless LAN...

 64
Internet Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup Broadcasting Setup Initial SetupInitial
Setup[English]
 
Connection Type
1 Press MENU to display the MENU screen, and then 
press 
c/
d to select Initial Setup.
2 Press a
/
b to select Internet Setup, and then 
press ENTER.
3 Press a
/
b to select Network Setup, and then 
press ENTER.
4 Press a
/
b to select Connection Type, and then 
press ENTER.
5 Press 
c/
d to select Wired or Wireless, and 
then press ENTER.
If you select...

 65
Using the Internet
 
H If you cannot connect to the Internet
Perform the procedures below to check your TVs 
network settings.
IP Setup
1 Press EXIT to display the normal TV screen.
2 Press MENU to display the MENU screen, and then 
press 
c/
d to select “Initial Setup”.
3 Press a
/
b to select “Internet Setup”, and then 
press ENTER.
4 Press a
/
b to select “Network Setup”, and then 
press ENTER.
5 Press a
/
b to select “IP Setup”, and then press 
ENTER.
Check that numbers are displayed for each...

 66
Entering Text (Software Keyboard)
When you are editing an input screen or specifying the 
Ethernet settings used for accessing the Internet, enter 
text from the software keyboard.
You can enter up to 128 characters for text. 
Buttons Description
aMoves the focus up. When the focus is at the top edge, this moves the focus to 
the opposite edge (bottom edge). 
bMoves the focus down. When the focus is at the bottom edge, this moves the 
focus to the opposite edge (top edge). 
cMoves the focus left....

 67
Using the Browser
ENTER, 
a/
b/
c/
da/
b/
c/
d to select a link that you want to jump, 
and then press ENTER.
EXIT Press the button to return to the TV screen.
RETURN Press the button to return to the previous page.
Example : The image shown below, which is only for 
explanation, is subject to change.
About links
Web pages on the Internet often include “links” that 
allow you to jump to other web pages (or sites).
“Links” can take various forms, including words 
or images, but they always work in the...

 68
Using the Toolbar
You can use the toolbar to control the browser and to 
specify settings.
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select a function, and then press 
ENTER.
Selected item Description
Displays the linked page in a new tab.
Displays the Tab menu.
Returns to the previous page.
Goes back to the original page when you 
have viewed the previous page.
Refreshes the page.
Interrupts a page while it is loading.
Displays the original home page.
Select this...