Sharp LC-60LE632U, LC-70LE732U HDTV Owners Guide

							 59
Using the Internet
By connecting your TV to a broadband system, you can access the Internet from the TV.
 Display the latest Internet information and access a range of useful information for AQUOS users from the 
original home page*.
 Use AQUOS ADVANTAGE LIVE to obtain the latest software and receive online user support.
 You can enjoy a variety of streaming content and Internet applications.
* About the original home page
 The original home page is a website set up speci cally for AQUOS owners. 
 The website is worth visiting as it provides a range of useful information, including tips on using your AQUOS 
and a frequently asked questions section.
Connecting to the Internet
 To connect your TV to the Internet, you must have a broadband Internet connection.
 If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your 
Internet service provider or telephone company.
 When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time. 
Use only one of the connection types. (See page 61.)
H Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband 
router (commercially available).
ETHERNET cable
Internet ModemPC
LAN
Broadband router
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 60
H Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use Wireless Setup to connect the access point and TV. (See page 61.)
Internet ModemPC
Wireless LAN router/
access point
 This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications 
that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.
 This TV has received the following certi cations.
- Wi-Fi CERTIFIED™ (certi cation program from the Wi-Fi Alliance
® )
- Wi-Fi Protected Setup™ (certi cation program from the Wi-Fi Alliance® )
 Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certi cation.
 A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation 
manual of your access point for setup.
 If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a 
connection. In this case, disable the stealth mode on the access point.
 A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the 
wireless LAN signal may be poor or drop, or the connection speed may become slower.
- When used in buildings made with concrete, reinforced steel, or metal
- When placed near objects that obstruct the signal
- When used with other wireless devices that emit the same frequency
-  When used in the vicinity of microwave ovens and other devices that emit a magnetic  eld, electrostatic charge, or 
electromagnetic interference
 When there is signi cant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth
® devices, 
2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that 
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of 
your access point.
 For users outside the United States, be sure to select your country before using the wireless LAN function. (See page 62.)
 A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed 
is unstable.
 Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.
 Please follow the legislation in your country when using the wireless LAN outdoors.
Using the Internet
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							
 61
Internet Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup
Broadcasting Setup
Initial Setup
Initial
Setup[English]
 
Connection Type
1 Press 
MENU to display the MENU screen, and then 
press  c/
d  to select Initial Setup.
2 Press  a
/b  to select Internet Setup, and then 
press  ENTER .
3 Press a
/b  to select Network Setup, and then 
press  ENTER .
4 Press a
/b  to select Connection Type, and then 
press  ENTER .
5 Press 
c/
d  to select Wired or Wireless, and 
then press  ENTER.
 If you select Wired, the signal is detected and setup 
is performed automatically. Use IP Setup to check 
and change the settings as necessary. (See page 62.)
 If you select Wireless, use Wireless Setup to  con gure the access point settings. 
Wireless Setup
If your access point supports Wi-Fi Protected Setup 
(WPS), it is recommended that you use this function 
for the wireless connection. You can press the WPS 
button on the access point to con gure the settings 
automatically.
 The name of the WPS button function may differ depending  on the access point. See the operation manual of the 
access point for details.
1  Con rm the current settings in Connection Type.
 If Wired is selected, press  c/
d  to select Wireless.
2 Press  a
/b  to select Wireless Setup, and then 
press  ENTER .
 Con rm the settings. If each setting item is correct, 
press  MENU  to exit.
 If you are con guring the wireless setup for the  rst  time or changing the settings, go to step 3.
3 Press  c/
d  to select Change, and then press 
ENTER .
4 Press a
/b  to select WPS, and then press 
ENTER .
 To select and register an access point manually, select 
Search or Manual Setup and make the necessary 
settings.
5 Press  a
/b  to select Push button, and then press 
ENTER .
 To con gure the setting via PC, select PIN code. 
Follow the on-screen instructions and the operation 
manual of the access point to con gure the settings.
6  Select Next to complete the settings. 
 The connection process starts and the WPS button on the access point can be pressed.
7  Press the WPS button on the access point.
 Pressing the WPS button displays a con rmation screen. Please wait until a connection is established.
8  When a connection is established, the connection 
details are displayed. Press  ENTER.
Interactive Service
If you do not want other people to connect to the 
Internet in your absence, you can make settings to 
keep the TV away from the Internet.
1 Press MENU to display the MENU screen, and then 
press  c/
d  to select “Initial Setup”.
2 Press  a
/b  to select “Internet Setup”, and then 
press  ENTER .
3 Press a
/b  to select “Interactive Service”, and then 
press  ENTER .
 Input the 4-digit secret number by using 0-9.
4 Press 
c/
d  to select “No”, and then press 
ENTER.
 If you want to allow Internet connection, select “Yes”, 
and then press ENTER.
5 Press  MENU to exit.
Checking Your Internet Connection
Press AQUOS NET  once or twice to switch to the 
TV+Web or Web screen. 
 is displayed after you connect to the Internet, 
check your TVs network settings and connection.
 When the original home page appears, now you are  connected to the Internet.
 You can also display the AQUOS NET screen by pressing  FAV APP  on the remote control unit. See page 34 for 
details on the FAV APP key Assign function.
 If you have failed to connect to the Internet in the above  operation, then an error message will appear. In this case, 
press  EXIT to return to the normal TV screen and check 
the relevant settings (see page 62).
 If you still cannot connect to the Internet, please consult  your Internet service provider or telephone company.
 When an application is used, you cannot make settings for  Internet Setup.
If you need to make the settings of Internet Setup, press 
EXIT  to return to the normal TV screen.
Using the Internet
-$  -&  6 @ -&  6 @& @ J O EE


 -$-&6@-&6@&@JOEE


  


   


 
						

							 62
Using the Internet
 
H If you cannot connect to the Internet
Perform the procedures below to check your TVs 
network settings.
IP Setup
1 Press EXIT to display the normal TV screen.
2 Press MENU to display the MENU screen, and then 
press 
c/
d to select “Initial Setup”.
3 Press a
/
b to select “Internet Setup”, and then 
press ENTER.
4 Press a
/
b to select “Network Setup”, and then 
press ENTER.
5 Press a
/
b to select “IP Setup”, and then press 
ENTER.
 Check that numbers are displayed for each setting.
 If there are any settings without numbers, specify the 
numbers by following the on-screen instructions.
 For information on how to enter text, see page 63.
Example
InitializeChange IP Address  :  Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : No Use
MAC Address  :  XX:XX:XX:XX:XX:XXSetting IP information
[Current Setup]
6 Press MENU to exit.
Setting the Country
1  Repeat steps 1 to 4 in IP Setup.
2 Press a
/
b to select Country, and then press 
ENTER.
3 Press a
/
b to select US, Canada, Mexico or 
Others, and then press ENTER.
 If you select “Others”, you need to set the desired area.
4 Press MENU to exit.
Setting the Zip Code
1  Repeat steps 1 to 4 in IP Setup.
2 Press a
/
b to select “Zip Code”, and then press 
ENTER. After “Change” is highlighted, press 
ENTER again.
3  Enter your zip code.
0-9 on the remote control unit, or use the software 
keyboard.
4  After “Complete” is highlighted, press ENTER.
5 Press MENU to exit.
Displaying Updated Information and 
Support Service
This function can be used to display up-to-date 
information on the original home page and allow you to 
receive support service over the network.
Original Home Page
1 Press AQUOS NET once or twice. You can also display the original home page by 
pressing FAV APP on the remote control unit. See 
page 34 for details on the FAV APP key Assign 
function.
 Each time you press AQUOS NET, the screen image 
toggles as shown below:
TV+Web      Web      TV
 When you are not connected to the Internet, a network 
function explanation screen is displayed.
The services displayed vary depending on 
circumstances.
2 Press a
/
b/c
/d
 to select a title, and then press 
ENTER.
 The service details vary depending on circumstances.
3 Press EXIT to return to the normal TV screen.
 Web page appearances may differ depending on the type 
of screen (TV+Web or Web).
 When displaying TV+Web with a channel in which the 
V-Chip is enabled, the cursor keys on the remote control 
unit do not function.
AQUOS Advantage Live
1 Press APPS to display the application window.
2 Press 
c/
dto select “AQUOS ADVANTAGE LIVE”, 
and then press ENTER.
 You can also display the AQUOS ADVANTAGE LIVE 
screen by pressing FAV APP on the remote control 
unit. See page 34 for details on the FAV APP Key 
Assign function.
3 Press a
/
b/
c/
d to select the desired service.
4 Press EXIT to return to the normal TV screen.
 The display may change as a result of a software update.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 63
Entering Text (Software Keyboard)
When you are editing an input screen or specifying the 
Ethernet settings used for accessing the Internet, enter 
text from the software keyboard.
 You can enter up to 128 characters for text.
Buttons Description
aMoves the focus up. When the focus is at the top edge, this moves the focus to 
the opposite edge (bottom edge). 
bMoves the focus down. When the focus is at the bottom edge, this moves the 
focus to the opposite edge (top edge). 
cMoves the focus left. When the focus is at the left edge, this moves the focus to 
the opposite edge (right edge).
When the focus is on “Character Set”, this selects the character type (moving 
backwards).
When the focus is in an input box, this moves the cursor in the input box to the left. 
dMoves the focus right. When the focus is at the right edge, this moves the focus to 
the opposite edge (left edge).
When the focus is on “Character Set”, this selects the character type (moving 
forwards). 
When the focus is in an input box, this moves the cursor in the input box to the 
right. 
ENTERPerforms the processing for the button currently in the focus. 
EXITCloses the software keyboard without applying the original input elements for the 
entered text.
Erases the text in the input box where the cursor is currently located. 
RETURNWhen the cursor is at the end of a sentence, this acts as a backspace. 
0-9Directly enters the single-byte number for that button.
A (red)Directly enters prediction candidate 1. 
B (green)Directly enters prediction candidate 2.
C (blue)Directly enters prediction candidate 3.
D (yellow)Enters a space. 
Caps Off/Caps On/Caps Lock
If “alphabet” is selected in “Character Set”, this switches 
characters between uppercase and lowercase.
Each time you press ENTER, the character type switches as 
shown below:
Caps Off: all the characters are lowercased
Caps On: only the  rst character is uppercased
Caps Lock: all the characters are uppercased
Done
Applies the entered information and closes the software 
keyboard.
Quit
Closes the software keyboard without applying the entered 
information.
You can also close the software keyboard by pressing 
EXIT on the remote control unit.
Displays the icon “”, indicating that a new line has been 
inserted.
Clear
Erases the character string.
When the cursor is somewhere in a line: the character 
string to the right of the cursor will be erased.
When the cursor is at the right end of a line: the entire line 
will be erased.
Delete
If the cursor is at the right end of a line, this erases text one 
character at a time.
You can also delete text by pressing RETURN on the 
remote control unit.
Using the Internet
The text you enter is displayed as you type it in. 
To move the cursor (the current input position), use 
“
” or “” on the software keyboard.
Press 
c/
d to select the type of characters entered: 
alphabet, number or sign.
(The selectable types depend on the input source.)
While you are entering text, likely input conversion candidates 
are displayed based on what you typed in.
A, B or C on the remote 
control unit.Enters a space.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 64
Using the Browser
ENTER, 
a/
b/
c/
da/
b/
c/
d to select a link that you want to jump, 
and then press ENTER.
EXIT Press the button to return to the TV screen.
RETURN Press the button to return to the previous page.
Example : The image shown below, which is only for 
explanation, is subject to change.
About links
 Web pages on the Internet often include “links” that 
allow you to jump to other web pages (or sites).
 “Links” can take various forms, including words 
or images, but they always work in the same way 
letting you jump to the link destination when you 
select them.
 Selected items (such as links of text input  elds) are 
enclosed in a yellow frame.
 You can jump from a “link” to the corresponding link 
destination.
CAUTION
 If the power is cut due to a power failure or the TV being 
unplugged while you are using the Internet, information 
such as bookmarks or cookies may not be saved correctly.
When a security noti cation window is displayed:

ENTER to close the window.
 This window appears when you visit a web page that has 
security protection, or when you move from a protected 
page to an unprotected page.
 In “Security Settings” you can set whether or not this 
window is displayed. (See page 67.)
When a cookie con rmation window appears:
Choose whether or not to accept the cookie (see page 67), 
and then press 
ENTER.
 In “Cookies” settings you can set whether or not this 
window is displayed. You can also opt to delete all the 
cookies at once. (See page 67.)
To users who access the Internet from a PC
 When you access the Internet from this TV, the 
procedures may not be the same as regular 
browser-based access on a PC.
 You cannot download  les.
 You cannot view a history of the pages you have 
visited.
 You cannot change the startup page displayed 
when you press AQUOS NET.
 Pop-up windows appear in separate tabs.
 On some pages, video and audio cannot be 
played, and text or images may not be displayed 
correctly.
When “z” is displayed in a page: The page failed to load successfully, or it contains images 
with formats that cannot be displayed on the TV. Try 
reloading the page by selecting “
” (see page 65) in the 
toolbar.
Using the Internet
Photo PlayerPhoto Player
:Tool:Tool:Scroll:ScrollAQUOSAQUOS  Console
Click   this  bu t t on  to  go   to  AQUOS  Network.
Page  1
       o f  3Add WidgetsAdd Widgets
LegalLegal
AQUOSAQUOS CenterAQUOSAQUOS  Network NetworkWhat’s NewWhat’s New
Feaeatured Cured Content
SportsSports
EntertainmentEntertainment
AQUOS Galleryallery
CONSOLE
MondayMondayTodayTodayWednesdayWednesdayTuesdayTuesday
AQUARIUSAQUARIUSGEMINIGEMINIPISCESPISCESARIESARIES
D
Pages with security protection are 
clearly shown as such.
If content on a page is continued on another page, 
directions to that page are shown clearly.
You can use 
a/
b/
c/
d to go to the continuation of a 
page.
 Where there is link text or a link image in the 
direction pressed, the text or image is selected  rst. 
If this happens, press the same direction button 
several times. Tab
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 65
Using the Toolbar
You can use the toolbar to control the browser and to 
specify settings.
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select a function, and then press 
ENTER.
Selected item Description
Displays the linked page in a new tab.
Displays the Tab menu.
Returns to the previous page.
Goes back to the original page when you 
have viewed the previous page.
Refreshes the page.
Interrupts a page while it is loading.
Displays the original home page.
Select this to open a bookmark.
Adds the current page to your bookmarks.
Displays the Browser menu.
Using Tabs
You can use tabs to view up to 3 web pages at the 
same time. Each page appears in a separate tab, and 
you can switch between the tabs.
1 Press B on the remote control unit to display the 
Tab menu.
 You can also display the Tab menu by clicking “” in 
the toolbar.
Selected item Description
Select ThisDisplays the web page in the 
selected tab.
Close This TabCloses the selected tab.
 You can also press C on the 
remote control unit to close a 
tab.
Close Other TabsCloses the other (unselected) tabs.
Create New TabCreates a new tab.
 You can also press A on the 
remote control unit to create a 
tab.
2 Press 
c/
d to select a tab.
3 Press 
a/
b to select the item you want to use, and 
then press ENTER.
Using the Internet
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 66
Saving the URL of the Current Page
Adding a web page to your bookmarks allows you to 
return to that page later by simply selecting it from your 
list of bookmarks.
1 Display the page that you want to bookmark.
2 Press D on the remote control unit to display the 
toolbar.
3 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER.
4 Select “Yes”, and then press ENTER.
 The page is added to your bookmarks.
Opening a Bookmarked Page
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER.
 Your bookmarks list is displayed.
3 Press 
a/
b/
c/
d to select the page you want to 
access, and then press ENTER.
 The selected page is displayed.
 If you have bookmarked 11 or more web pages, press 
c/
d to scroll through your bookmarks list. 
When opening a bookmark in a new tab:
1
 Press A instead of ENTER.  The Bookmarks menu appears.
2 Select “Open in New Tab”, and then press 
ENTER.
Editing Bookmarks
You can rearrange or delete the  bookmarks.
 
■Switching between the URL and title name
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER. 
 Your bookmarks list is displayed.
3 Press 
a/
b to select the title you want to edit from 
the bookmarks list, and then press A on the remote 
control unit.
 The Bookmarks menu appears.
4 Select “Display by Address” or “Display by Title” in 
the Bookmarks menu, and then press ENTER.
 
■Rearranging displayed items
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER.
 Your bookmarks list is displayed.
3 Press 
a/
b to select the title you want to display 
in a different position from the bookmarks list, and 
then press A on the remote control unit.
 The Bookmarks menu appears.
4 Press 
a/
b to select “Move Up” or “Move Down”, 
and then press ENTER.
 
■Deleting bookmarks
1 Press D on the remote control unit to display the 
toolbar.
2 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER.
 Your bookmarks list is displayed.
3 Press 
a/
b to select the title you want to delete, 
and then press A on the remote control unit.
 The Bookmarks menu appears.
4 Press 
a/
b to select “Delete”, and then press 
ENTER.
 To delete all the bookmarks, select “Delete All”.
5 Press 
c/
d to select “Yes”, and then press 
ENTER.
Using the Internet
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 67
Browser Settings
You can check or modify your browser settings from 
the Browser menu. 
The Browser menu includes a display settings menu 
and a security settings menu.
1 Press D to display the toolbar.
2 Press 
c/
d to select “”
 in the toolbar, and then 
press ENTER.
3 Press 
c/
d to select the settings menu you want to 
access.
4 Press 
a/
b to select and con rm the item you want 
to set.
5 Press 
a/
b/
c/
d to specify the required setting, 
and then press ENTER.
6 Press D to exit.
View Settings
Zoom In/Out:
Zoom in: Displays content enlarged to 200%.
Normal: Displays content at 100%.
Zoom out: Displays content reduced to 75%.
Encoding: Selects the desired encoding from the list below:
Western (ISO-8859-1)/Unicode (UTF-8)
Page Information: Displays information about the currently 
displayed page.
Reset:
Yes: Resets the browser settings.
No: Does not reset the browser settings.
 “Reset” does not reset the certi cation enable/disable and 
Encoding settings.
Security Settings
Security:
Save Setting: If you select this option, a message is 
displayed when you move from a protected page to an 
unprotected page.
To change this setting, remove the tick, select “Save 
Setting” and then press ENTER.
Root Certifi cates/CA Certifi cates: Displays the list of 
certi cates. To disable a certi cate, select the certi cate 
to be disabled and press A to display the sub-menu. 
Select “Disable”, and then press ENTER.

certi cate list screen.
Cookies:
Accept all: Select this option to accept all cookies.
Reject all: Select this option when you do not want to 
accept cookies.
Prompt before accepting: When you open a page 
that uses cookies, this option displays a con rmation 
message.
Delete All Cookies: Deletes all your cookies.
Server Certifi cates: Displays certi cates for the connected 
server.
Browser Information: Displays browser information.
• This product contains NetFront Browser of 
ACCESS CO., LTD.
• ACCESS, the ACCESS logo and NetFront 
are registered trademarks or trademarks of 
ACCESS CO., LTD. in the United States, 
Japan and/or other countries.
  © 2009 ACCESS CO., LTD. All rights 
reserved.
• This software is based in part on the work of 
the Independent JPEG Group.
Using the Internet
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 68
Using the Internet
Using Applications via the Internet
By connecting the TV to the Internet, you can enjoy a 
variety of broadband content, including videos, movies, 
music, photos, and games.
Please check that the most current software is 
loaded on TV by selecting Auto Update Setting on 
Software Update (see page 37) or by visiting 
http://www.sharpusa.com/products/support/ 
to check for a download of the newest software version.
1 Press APPS to display the application window.
APP1 APP2 APP3
Example
2 Press 
a/
b/
c/
d to select the desired application, 
and then press ENTER.
 is displayed after you connect to the Internet, 
check your TVs network settings and connection.
 When using this TV to access an Internet application 
for the  rst time, the Disclaimer appears on the screen. 
Press 
a/
b to select Agree, and then press ENTER. 
(You must select Agree to use the application.)
 Additional applications will be available in the future.
3  The screen for the selected application is displayed. 
Follow the on-screen instructions for each 
application.
 Check the web site of the provider for details on setup 
and use of the functions.
 These applications are provided by content providers. The 
available applications vary depending on your country or 
region.
 The delivery speed of applications varies depending on 
the network speed. Check the web site of the provider for 
details on application setup and other information.
Example
Menu
Identification
Software Update Digital Caption Info.
Netflix Help
Vudu Help Information
Information
 
Deactivating Netfl ix Function
1 Press MENU to display the menu screen.
2 Press 
c/
d to select Information, and then press 
ENTER.
3 Press 
a/
b to select Net ix Help, and then press 
ENTER.
4 Press 
c/
d to select Deactivate, and then press 
ENTER.
 To con rm the Net ix status, check the information 
displayed on the screen and click OK.
Deactivating the VUDU Function
1 Press MENU to display the menu screen.
2 Press 
c/
d to select Information, and then press 
ENTER.
3 Press 
a/
b to select Vudu Help, and then press 
ENTER.
4 Press 
c/
d to select Yes, and then press 
ENTER.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC