Sharp LC-60LE632U, LC-70LE732U HDTV Owners Guide

							 49
Presetting Remote Control Function
You can operate the connected AV products (AV 
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, 
LD) using the presetting manufacturer function of your 
remote control unit.
14
12
11
6
13
10
8
9
7
54 32
1
Presetting manufacturer codes
1   Press an appropriate button (STB, DVD•VCR or 
AUDIO) to operate the connected equipment.
2   Press an appropriate button (STB, DVD•VCR or 
AUDIO) and DISPLAY at the same time to enter 
the code registration mode.
3   Press 0–9 to enter the manufacturer code. (See 
page 50.)
 Preset mode is  nished once the LED no longer lights 
up.
4   After registering the code, the LED will stop blinking 
then turn off after one second. (If you perform an 
incorrect operation, the LED will blink quickly then 
turn off.)
Operating the Connected Equipment
To operate the connected equipment, press STB, 
DVD•VCR or AUDIO to select your device. (STB 
(cable/satellite set-top box), DVD, BD, VCR or AUDIO.) 
The remote control unit button will function as follows.
 When you operate VCR, DVD or BD, press INPUT to select 
the terminal connected to your device. 
 CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)  
2 I
3 G 

4 H

disc players, pressing the button twice may open the disc 
tray. (DVD, BD)
5 K
currently playing. Each time you press it, you move back 
to the start of the previous chapter. (DVD, BD)
6 0–9, • (DOT) (STB)
channel that you wish to watch.
7 J
(VCR)

8 F
9 L
chapter. Each time you press it, you move ahead to the 
start of the next chapter. (DVD, BD)
10 EREC
11 FLASHBACK
channel you were watching immediately before. Some 
manufacturers do not preset FLASHBACK. (STB)
12 CH
r/
sCHr or CHs to tune in to a higher or lower 
channel. (STB)

(VCR)
13 MENU
display. (DVD, BD)
14 a/
b/
c/
d, ENTER
a/
b/
c/
d: Press the button to select items on the STB 
GUIDE screen or STB MENU screen. (STB)
  Press the button to select items on the DVD/BD menu 
screen. (DVD, BD)
ENTER: Press to activate the selected function. (STB, 
DVD, BD)
Other Viewing Options
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 50
Manufacturer codes Other Viewing Options
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY  WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA09
13
04
12
04
09
10, 13, 14
04
04
04
09, 16, 17, 22
09
04, 05, 06
12
04
02
09
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
09
10
09
REMOTE CONTROL CODE 
NUMBER VCR BRAND
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH24
31
36
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
REMOTE CONTROL CODE 
NUMBER DVD/BD/LD BRAND
 Depending on the brand, the codes of some BD players 
may not be supported.
ANVISION
CABLE STAR
EAGLE 
G.INSTRUMENT
GERROLD
JERROLD
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH04, 05
04, 05
05
02, 03, 10, 11, 17, 20
17
02, 03, 10, 11, 12, 20, 
25-34
04, 05, 08, 12, 15, 16, 
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
07 
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
06, 35
REMOTE CONTROL CODE 
NUMBER STB BRAND
 Numbers marked with * are SAT codes, all others are STB 
codes.
SHARP
SHARP (SOUND BAR)01
02
AUDIO BRANDREMOTE CONTROL CODE 
NUMBER
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 51
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
 Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate 
compatible system equipment (Blu-ray disc equipment, AV ampli er, DVD).
 By connecting AQUOS LINK-compatible devices with HDMI-certi ed cables to the TV, you can control a 
recorder or AV ampli er using the remote control of the TV.
 AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Back panel 
vertical inputs Back panel 
horizontal inputs
Example
AQUOS LINK-compatible 
Audio system AQUOS BD Player
HDMI-certied cable *
* Use HDMI 1 to connect 
   ARC-compatible equipment.
HDMI-certied cable  Optical ber cableConnecting AQUOS 
BD Player via AQUOS 
LINK-compatible 
Audio system 
 For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
 Point the remote control toward the TV, not to connected HDMI equipment.
 Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certi ed cable.
 Up to 3 pieces of HDMI recording equipment and one AV ampli er can be connected using this system.
 These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on 
the equipment and select the appropriate input source using INPUT.
Connected AQUOS LINK-compatible devices can be operated without 
changing the settings of the remote control unit. 
OPTION button will function only when AQUOS LINK is used.
■ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the 
image from the HDMI source.
■
 One Touch Recording
Press 
EREC while you are viewing a broadcast received with the AQUOS 
LINK-compatible recorder. The AQUOS LINK automatically recognizes the 
connected HDMI device and starts recording.
■
 Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and 
you can control the TV and the devices as if using a universal remote control.
■
 Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
 The above description is an example of the AQUOS LINK function.
 The steps in “AQUOS LINK Setup” on page 52 need to be completed beforehand.
 Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 52
AQUOS LINK Setup
Menu
System Options
AQUOS LINK Setup
System
Options
AQUOS LINK Control
[On]Auto Power On[Yes]
[Auto]
Selecting Recorder
Channel Select Key
Audio Return Channel
Example
     
1   Press MENU to display the MENU screen, and then 
press 
c/
d to select System Options.
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
3   Press 
a/
b to select a speci c item, and then press 
ENTER.
4   Press 
a/
b (or 
c/
d ) to select the desired setting, 
and then press ENTER.
5   Press MENU to exit.
AQUOS LINK Control
Select AQUOS LINK Control to disable AQUOS LINK 
function even when an AQUOS LINK-compatible HDMI 
device is connected to the TV. This function prevents 
the device from starting to operate unexpectedly.
On:  You can operate AQUOS LINK-compatible 
equipment.
Off:  AQUOS LINK function does not work.
Auto Power On
If this is activated, the One Touch Play function is 
enabled.
Yes: While the TV is in standby mode, it automatically 
turns on and plays back the image from the HDMI 
source.
No: This function does not work.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are 
connected, this function allows you to set the recorder 
for recording when you press 
EREC on the TV’s 
remote control unit.
Press 
a/
b to select the recorder for recording.
 When an AQUOS LINK-compatible audio system or other 
equipment is connected between the TV and recorder, 
“Sub” is displayed.
Using AQUOS LINK
Channel Select Key
This function can be set for each input terminal.
On: The remote control unit of the TV can be used to 
select the channel, display program information, and 
perform other operations of a connected AQUOS 
LINK-compatible recorder.
Off: This function does not work.
Audio Return Channel
This function allows you to listen to the TV audio via 
audio equipment without using an optical  ber cable, 
which conventionally is required.
Requirements for using an ARC-compatible AV 
amplifi er:
 ARC-compatible AV ampli er connected to the ARC-
compatible HDMI terminal (HDMI 1).
(Refer to the operation manual of the ARC-compatible 
equipment for details.)
 Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-
compatible audio equipment.
Off: This function does not work.
 If the TV audio cannot be output from the AV ampli er even 
after making the necessary settings, connect the TV to the 
AV ampli er with an optical  ber cable and select “Off”.
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Press 
d to start playing back a title.
 The last played program is played back. You can use the 
following buttons during broadcast viewing.
Buttons Description
POWER
(SOURCE)Turns the power of the HDMI connected devices 
on and off.
GHold down to go in reverse.
IStarts playback.
JHold down to fast forward.
HPlayback stops.
FSets pauses and still pictures.
TPressing quickly once takes you to the start of the 
chapter currently playing. Each time you press it, 
you move back to the start of the previous chapter.
UPressing quickly once takes you to the start of the 
next chapter. Each time you press it, you move 
ahead to the start of the next chapter.
T/U do not function with the following 
Blu-ray disc players currently available.
- BD-HP20U, BD-HP50U
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 53
Link Operation Menu
Recorder Power On/Off
Device Operation panel
[By AQUOS SP]
Play from Rec. List
Show Start Menu
Change Media of Device
Link Booking (Rec. Book)
Change Audio Output Device
Change Surround Mode
HDMI Device Selection
AQUOS LINK Setup Link Operation
MenuLink
Operation
     
Start Recording
Stop Recording Link Operation
MenuLink
Operation
     
Displaying the Link Operation Menu
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
 The AQUOS LINK Setup menu screen is displayed.
Turning On/Off AQUOS LINK-compatible 
Equipment
You can manually turn on/off the power of connected 
AQUOS LINK-compatible equipment.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Recorder Power On/Off”, and 
then press ENTER.
3   Select “On” (or “Off”) and press ENTER to turn on 
(or off) the equipment.
Using AQUOS LINK
     
One Touch Recording
This function allows easy one-touch recording of the 
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by 
simply pressing 
EREC on the remote control.
Prepare the connected AQUOS LINK-compatible 
recorder for recording. Check the following items.
 Make sure that the antenna cable is connected.
 Check that there is suf cient available space on the 
recording media (HDD, DVD, etc.).
 On the TV, use “AQUOS LINK Setup” and “Selecting 
Recorder” to select the equipment for recording.
 By default, the recorder connected to HDMI 1 is selected 
for recording.
1 Press EREC to start recording.
 When you are viewing a broadcast received with the 
AQUOS LINK-compatible recorder selected in Selecting 
Recorder, recording to the AQUOS recorder of the 
broadcast being viewed starts.
 When you are viewing a broadcast received with 
equipment other than the AQUOS LINK-compatible 
recorder selected in Selecting Recorder or other 
external input equipment, pressing 
EREC on the remote 
control does not start recording.
2  Use the Link Operation Menu to stop recording.
1 Press OPTION to display the Link Operation 
Menu screen.
2 Press a
/
b to select “Stop Recording”, and 
then press ENTER.
Start/Stop Recording
You can also use the Link Operation Menu for 
recording on the connected AQUOS LINK-compatible 
equipment.
1 Press OPTION to display the Link Operation Menu 
screen.
2  Select “Start Recording”, and then press ENTER to 
start recording.
 You can also start recording by pressing EREC on the 
remote control unit.
3  Select “Stop Recording”, and then press ENTER to 
stop recording.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 54
Using the Device Operation Panel
You can use the device operation panel to control 
playback operations.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Device Operation Panel”, and 
then press ENTER.
3   Press 
a/
b/
c/
d to select the desired operation.
 This function works only when AQUOS LINK-compatible 
equipment with the Device Operation Panel function is 
connected.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the 
AQUOS LINK-compatible equipment.
1   Power on the AQUOS LINK-compatible equipment, 
and select appropriate external input.
2   Press OPTION to display the Link Operation Menu 
screen.
3   Press 
a/
b to select “Play from Rec. List”, and 
then 
press ENTER.
 The title list data from the connected AQUOS LINK-
compatible equipment displays.
4   Select the title with 
a/
b/
c/
d, and then press 
d 
to start playback.
 This function works only when AQUOS LINK-compatible 
equipment is connected.
Displaying the Setup Menu of AQUOS 
LINK-Compatible Equipment
You can call up a setup menu from the connected 
AQUOS LINK-compatible equipment.
1    Press OPTION to display the Link Operation Menu 
screen.
2   Press a/
b
 to select Show Start Menu, and then 
press ENTER.
 The setup menu of the AQUOS LINK-compatible 
equipment is displayed.
 Depending on the status of the equipment (recording or in 
standby mode, etc), the setup menu will not be displayed.
 The setup menu will not be displayed with the player 
BD-HP20U currently available.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
You can switch the media (HDD or DVD) for playback 
or recording on the AQUOS LINK-compatible recorder.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Media of Device”, 
and then press ENTER.
3  Select the desired media such as HDD or DVD. 
 The Media type toggles each time you press ENTER in 
“Change Media of Device”.
 Select the media to be operated by the player.
Using AQUOS LINK
Timer Recording
You can call up the AQUOS LINK-compatible 
recorder’s EPG and preset timer recordings using the 
TV’s remote control.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Link Booking (Rec. Book)”, 
and then press ENTER.
 The recorder’s EPG is displayed.
3   Select the program to record.
 You can use 
a/
b/
c/
d,
 ENTER, RETURN, EXIT and 
the colored buttons.
 This function works only when an AQUOS LINK-compatible 
recorder is connected.
 Refer to the operation manual of the recorder for details.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the 
AQUOS LINK-compatible audio system and manually 
change its sound mode.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Audio Output 
Device”, and then press ENTER.
3   Press 
a/
b to select “By AQUOS audio SP”, and 
then press ENTER.
 The sound from the TV speaker is muted and only the 
sound from the AQUOS LINK-compatible audio system 
is audible.
 You can use VOL
k/
l and MUTE.
Select “By AQUOS SP”, and then press ENTER to 
listen to the TV sound.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Surround Mode”, 
and then press ENTER.
 The sound mode changes each time you press ENTER.
 Refer to the operation manual of the AQUOS LINK-
compatible audio system for details.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “HDMI Device Selection”, and 
then press ENTER.
 A list of connected HDMI devices is displayed.
3   Press 
a/
b to select the desired device, and then 
press ENTER.
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 55
VIEW MODE
You can select the screen size.
1   Press VIEW MODE.
 The View Mode menu displays.
 The menu lists the View Mode options selectable for the type of video signal currently 
being received.
2   Press VIEW MODE or 
a/
b while the View Mode menu is displayed to select a 
desired item on the menu.
 You can sequentially select a View Mode that has its own aspect ratio.
 Connect the PC before making adjustments. (See page 16.)
 Selectable screen size may vary with input signal type.
 You can have the same settings by choosing View Mode on the menu items. (See page 30.)
Example: Screen size images
Input signalNormal Zoom Stretch Dot by Dot
4:3Keeps the original 
aspect ratio in a full 
screen display.For viewing 
widescreen 
programs. The top 
and bottom of the 
image is cropped.An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Input signalStretch Dot by Dot
16:9An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Using a PC
Displaying a PC Image on the Screen
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 56
Using a PC
Example
Menu
View Option
Input Terminal Setting AQUOS LINK Setup
Menu Design
OtiLkOt System Options
System
Options
  
1   Press MENU to display the MENU screen, and then 
press 
c/
d to select System Options.
2   Press 
a/
b to select Input Terminal Setting, and 
then press ENTER.
3   Press 
a/
b to select PC input or Audio Select, 
and then press ENTER.
4   Press 
a/
b to select a speci c adjustment item, 
and then press ENTER to set each item.
5   Press 
a/
b (or 
c/
d) to select or adjust the desired 
setting, and then press ENTER.
Adjusting the PC Image
Auto Sync. (for Analog PC Input Mode Only)
For automatically adjusting the PC image.
Yes: Auto Sync. starts and Now adjusting the image. 
displays.
No: This function does not work.
 When Auto Sync. is successful, Completed displays. If 
not, Auto Sync. failed.
 Auto Sync. may fail even if Completed displays.
 Auto Sync. may fail if the computer image has low 
resolution, has unclear (black) edges, or is moved while 
executing Auto Sync..
 Be sure to connect the PC to the TV and switch it on before 
starting Auto Sync..
Fine Sync.
Ordinarily you can easily adjust the picture as necessary 
to change image position using Auto Sync.. In some 
cases, however, manual adjustment is needed to 
optimize the image.
H-Pos.: Centers the image by moving it to the left or right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image  ickers with vertical 
stripes.
Phase: Adjust when characters have low contrast or 
when the image  ickers.
 For resetting all Fine Sync. adjustment items to the factory 
preset values, press 
a/
b to select Reset, and then press 
ENTER.
 It is not necessary to adjust the Clock or Phase when a 
digital signal is being input, so it cannot be selected.
 The default cursor position may not be in the center, 
because the screen position variable ranges may be 
asymmetrical.
 The screen position variable ranges depend on the View 
Mode or the signal type. The ranges can be seen on the 
position-setting screen.
Setting Audio Input
Audio Select
This function sets the terminal to output the computer 
audio.
The adjustment items vary depending on the input 
source. Select the input source corresponding to the 
terminal connected to the PC and then adjust the 
desired item.
■ PC IN
Video: Select this when the TV and PC are connected 
using an analog RGB cable and the audio is not input.
Video+Audio: Select this when the TV and PC are 
connected using an analog RGB cable and the audio is 
input via a Ø 3.5 mm stereo minijack.
■ HDMI 1HDMI(Digital): Select this when the TV and PC are 
connected using an HDMI-certi ed cable and audio is 
input via the same cable.
HDMI+Analog: Select this when the TV and PC are 
connected using a DVI-HDMI conversion cable and the 
audio is input via a Ø 3.5 mm stereo minijack.
 When Audio Select is set to HDMI(Digital), sound will 
not be produced if you use only an HDMI-certi ed cable to 
connect HDMI-compatible equipment. To produce sound, 
you should make an analog audio connection.
 If you want to connect HDMI-compatible equipment 
using only an HDMI-certi ed cable, set Audio Select to 
HDMI(Digital).
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA 
and WXGA signal. 
VGA and XGA are registered trademarks of International 
Business Machines Corp.
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz 640 x 480 720 x 400
VGA
800 x 600 SVGA
XGA 1024 x 768
WXGA 1360 x 76870 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 HzO
O
O
O
O
O
O
O O
O
O
64.0 kHz SXGA 1280 x 102460 Hz O
65.3 kHz SXGA+ 1400 x 1050 60 Hz O
75.0 kHz UXGA 1600 x 1200
60 Hz
67.5 kHz 1080p 1920 x 1080 60 HzO
Horizontal 
FrequencyVESA 
Standard ResolutionVertical 
Frequency
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 57
 The TV can be controlled from a PC, control panels 
and other devices using the RS-232C or IP.
 Use a cross-type RS-232C cable, ETHERNET cable 
(commercially available) or wireless LAN for the 
connections.
 This operation system should be used by a person who is 
accustomed to using computers.
■ Communication conditions for IPConnect to the TV with the following settings made for 
IP on the PC.
IP protocol:TCP/IP
Host IP address:Set the IP address on the TV menu
Service:None (Do not select Telnet or SSH)
TCP port#:Set a port number on the TV menu 
(Control port)
When you set your ID and password on the TV menu, 
you need to enter them as soon as you connect to the 
TV.
 The connection will be cut off when there has been no 
communication for 3 minutes.
IP Control Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup Broadcasting Setup Initial SetupInitial
Setup[English]
 
1 Press MENU to display the MENU screen, and then 
press 
c/
d to select Initial Setup.
2 Press a
/
b to select Internet Setup, and then 
press ENTER.
3 Press a
/
b to select Network Setup, and then 
press ENTER.
4 Press a
/
b to select IP Control Setup, and then 
press ENTER.
5 Press 
c/
d to select Change, and then press 
ENTER.
6  To use IP Control, press 
c/
d to select Enable, 
and then press ENTER.
7  Set the device name.
8  Set your login ID and password.
9  Set the port to use with IP Control.
10  Con rm the settings, and then press OK.
■ Communication conditions for RS-232CSet the RS-232C communication settings on the PC to 
match the TVs communication conditions.
The TVs communication settings are as follows:
Baud rate:9,600 bps
Data length:8 bits
Parity bit:None
Stop bit:1 bit
Flow control:None
■ Communication procedure Send the control commands from the PC via the RS-
232C or IP.
The TV operates according to the received command 
and sends a response message to the PC.
Do not send multiple commands at the same time. 
Wait until the PC receives the OK response before 
sending the next command.
■ Command format
Eight ASCII codes 
e CR
Command 4-digits
Parameter 4-digitsReturn code
C1 C2 C3 C4 P1  P2  P3  P4
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
■ ParameterInput the parameter values, aligning left, and  ll with 
blank(s) for the remainder. (Be sure that 4 values are 
input for the parameter.)
When the input parameter is not within an adjustable 
range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
a30 0009
0???? ?
When “?” is input for some 
commands, the 
present setting 
value responds.
■ Response code format
Normal response
Return code (0DH)
Return code (0DH) Problem response (communication 
error or incorrect command)
OKERR
Control of the TV
Using a PC
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC








 
						

							 58
■ Command table Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMANDPARAMETERCONTROL CONTENTS
POWER ON COMMAND SETTING
POWER SETTINGThe Power On command rejected.
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the 
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input. 
    [AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
10, 11: Available when USB-Video, DLNA-Video or Internet application is used. (Toggle)
0: (Toggle), 1:  STANDARD, 2: MOVIE , 3: GAME, 
4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC, 
8: x.v.Color (LC-70LE732U only), 100: AUTO
Volume (0–60)
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC], 
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
10: Auto [USB-Video, DLNA-Video or Internet applications], 11: Original [USB-Video, DLNA-Video or Internet applications]   
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
If it is not TV display, it will input-switch to TV. (same function as CHU)
If it is not TV display, it will input-switch to TV. (same function as CHV)
Toggle operation of a closed caption. 0: (Toggle), 1: On, 2: Off
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN., 
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
The channel number of TV
The channel number of TV +1
The channel number of TV  –1(Toggle) (1–135) RSPW
ITGD
ITVD
IAVD INPUT SELECTION TOGGLE
AV MODE SELECTION
VOLUME
POSITION
VIEW MODE
SURROUND
SLEEP TIMER
CHANNEL
CCDIRECT
(ANALOG)
(DIGITAL)
CH UP
CH DOWN CHANNEL H-POSITION H-POSITION
V-POSITION
CLOCK
PHASEAVMD
VOLM
HPOS
VPOS
CLCK
PHS E
ACSU
OF TM
DCCH
CHUP
CHDW
CLCP WI DE0
x
0
*
*
*
*
*
*
*
*
*
*
x
x
x*
*
_
_
_ _
_ _*
*
*
*
* _
_
_
_
_
*
_
_
_ _
_ _*
*
*
* _ _
_
_
_
_
_
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit) (0100-9999)
(1-999)
(0-999)
(0-9999)
(0-6383)DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIRECT
CHANNELDA 2 P * * * *
DC 2 U * * * _
DC 2 L * * * _
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000) DC 1 0 * * * *
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000) DC 1 1 * * * *
_
_
_
The device name set in IP Control Setup is displayed. DEVICE NAME
TVNM1 _ _ _
The model name of the TV MODEL NAME
MN R D 1 _ _ _
The current version of the TV software is displayed. SOFTWARE VERSION
SWV N 1 _ _ _
The currently supported version of IP protocol is displayed.
IP PROTOCOL VERSION
IPPV1____
(Toggle) AUDIO SELECTION
ACHA
x___
_0: (Toggle), 1: On, 2: Off MUTE
MU T E
*____ _
_
_
_ _ _Off
The Power On command accepted. 1 _ _ _ On [RS-232C]
The Power On command accepted.
When the power is in standby mode, commands also go to waiting status 
and so power consumption is just about the same as usual. With the 
commands in waiting status, the Center Icon Illumination on the front of the 
TV lights up. 2 _ _ _ On [IP]
Power On 1 _ _ _ Power OnIt shifts to standby. P O W R 0 _ _ _ Power Off
_
_
_
_ TV
1-71: HDMI 1, 2: HDMI 2, 3: HDMI 3, 4: HDMI 4, 
5: COMPONENT, 6: VIDEO 1, 7: VIDEO 2
 If an underbar (_) appears in the parameter column, enter a space.
 If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
 Any numerical value can replace the “x” on the table.
Using a PC
-$-&6@-&6@&JOEC


-$-&6@-&6@&JOEC