Sharp LC-5260LE920UN HDTV Owners Guide

							 39
Enjoying Photo/Music/Video Playback
You can enjoy viewing photos, listening to music and watching videos from external USB memory devices.
Depending on the USB memory device, the TV may not be able to recognize the recorded data.
Use only alphanumeric characters for naming fi les.
File names over 80 characters (may vary depending on character set) may not be displayed.
Do not remove a USB memory device or memory card from the TV while transferring fi les, using the slide show function, or 
switching screens, or before you exit "USB" from the CH List.
Do not insert and remove a USB memory device to and from the TV repeatedly.
When using a card reader, be sure to insert Memory fi rst before using the card reader.
USB input cannot be selected when displaying the browser (including the Sidebar Widget). Close the browser fi rst. •
•
•
•
•
•
•
4   Press c
/d
 to select the desired folder, and then 
press ENTER.
You do not need to select the drive in step 3 when there is 
only one drive in the connected USB device.
Up to 16 drives can be displayed.
Displaying the USB Media Screen
The USB Media screen can be displayed even by using 
the menu screen.
■ When displaying the data with the CH List 
screen
1   Press INPUT to display the CH List screen.
2   Press a
/b
 or press INPUT again to select "USB".•  The display varies depending on the type of data 
recorded in the USB memory device.
You cannot enter this mode when a USB memory device is 
not inserted into the TV.
"VIEW MODE" is fi xed during this mode.
■ When displaying the data with the DOCK
1 Press APPS to display the DOCK.
2   Press c
/d
 to select "USB Media", and then press 
ENTER.
•
•
•
•
Viewing Photos, Listening to Music 
and Watching Videos
1   Insert the USB memory device with recorded 
photos, music or videos into the USB 1 or USB 2 
terminal on the TV.
•  The USB Media screen is displayed.
•  If USB memory devices are inserted into both 
terminals, the USB 1 terminal has priority.
•  The display varies depending on the type of data 
recorded in the USB memory device.
CAUTION
•  Do not use a USB extension cable when connecting 
a USB memory device to the USB terminal on the TV.
•  Using a USB extension cable may prevent the TV 
from performing correctly.
Music
Photo
Video
Example
2   Press c
/d
 to select "Photo", "Music" or "Video", 
and then press ENTER.
3   Press a
/b
/c
/d
 to select the drive where you 
want to fi nd your fi les, and then press ENTER.
•  You can display the USB MENU screen by pressing D.
•  If the TV is turned off and then on again, the number 
assigned to the USB drive may change.
Drive1Drive2
Drive5 Drive6Drive3 Drive4
Example
-$@-&6/@&@JOEE





 
						

							 40
Enjoying Photo/Music/Video Playback
Photo Mode
Viewing Thumbnails
... ...picture 5picture 4picture 2picture 1picture 3
Example
■ Buttons for thumbnail operations
Buttons Description
a/
b/
c/
dSelect a desired item.
ENTERDisplay the photo.
RETURNReturn to the previous process.
A (red)Select the images to be displayed. Press 
this button to add or remove a checkmark.
B (green)Display the music list screen.
C (blue)Start the slide show.
D (yellow)Display the USB MENU screen.
When there are invalid photo fi les, the X mark will be 
displayed for the fi le.
You can see the fi le name, shooting date, fi le size and pixel 
size of the selected photo in the lower-left corner of the 
screen (shooting date is only available in the EXIF fi le format).
Viewing Individual Photos
The photo selected on the thumbnail selection screen 
is displayed.
■ Buttons for individual display operation
Buttons Description
c/
dGo to the previous/next photo in the same 
directory.
RETURNReturn to the thumbnail selection screen.
A (red)Rotate the photo by 90 degrees to the left.
B (green)Rotate the photo by 90 degrees to the right.
C (blue)Reveal/hide the Guide Display.
Rotating photos only applies to the temporarily selected 
item and this setting is not saved. •
•
•
Slide Show
The photos displayed on the thumbnail selection 
screen are displayed as a slide show.
■ Buttons for slide show operation
Buttons Description
RETURNReturn to the thumbnail selection screen.
C (blue)Reveal/hide the Guide Display.
D (yellow)Display the USB MENU screen.
The selected BGM is played repeatedly.
The slide show continues until you press RETURN.
For setting the slide show speed, select "Select Slide Show 
Interval" on the USB MENU screen.
USB Menu
[10sec] Select Slide Show Intrerval
Select Slide Show BGM
Set All Slide Show Image
Reset All Slide Show ImageUSB MENU
Example
Select Slide Show Interval
Specify the length of time before the next image 
appears.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select "Select Slide Show Interval", 
and then press ENTER.
3 Press a/
b to select "10sec", "30sec" or "60sec", and 
then press ENTER.
•
•
•
-$@-&6/@&@JOEE





 
						

							 41
Enjoying Photo/Music/Video Playback
Select Slide Show BGM
You can select the music to be played in the 
background while the slide show is being displayed.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to  select "Select Slide Show BGM", 
and then press ENTER.
•  The list screen is displayed.
•  You can display the list screen by pressing B on the 
thumbnail selection screen.
3  Select the music.•  Checkmarks are added to the selected music.
... ...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP33:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
■ Buttons for slide show BGM select operation
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERPlay music.
RETURNReturn to the previous process.
A (red)Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green)Stop music.
C (blue)Play/Pause music.
D (yellow)Display the USB MENU screen.
4   Press RETURN to display the thumbnail selection 
screen, and then press C to start the slide show 
and the background music.
All of the music fi les are selected by default. •
Set/Reset All Slide Show Image
Set or reset the images to be displayed.
1   Press D to display the USB MENU screen.
2   Press a/
b to select "Set All Slide Show Image"/
"Reset All Slide Show Image", and then press 
ENTER.
•  When you select "Set All Slide Show Image", 
checkmarks are added to all the images.
•  When you select "Reset All Slide Show Image", remove 
all the checkmarks from all the images.
... ...picture 5picture 4picture 2picture 1picture 3
Example
3   Press C to start the slide show.
If no images have been selected, "Cannot display the data" 
is displayed and the slide show does not start. •
-$@-&6/@&@JOEE





 
						

							 42
Enjoying Photo/Music/Video Playback
Music Mode
... ...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP33:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
■ Buttons for music mode
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERPlay music.
RETURNReturn to the previous process.
A (red)Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green)Stop music.
C (blue)Play/Pause music.
D (yellow)Display the USB MENU screen.
When there are invalid music fi les, the X mark will be 
displayed for the fi le.
The displayed play time may differ slightly from the actual 
play time depending on the fi les.
USB Menu
Set All Auto Play
Reset All Auto PlayUSB MENU
Example
Set/Reset All Auto Play
Set or reset the music to be played back.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select "Set All Auto Play"/"Reset All 
Auto Play", and then press ENTER.
•  When you select "Set All Auto Play", checkmarks are 
added to all the music fi les.
•  When you select "Reset All Auto Play", remove all the 
checkmarks from all the music fi les.
3   Press C to play back the music.
If no music fi les have been selected, "Cannot playback the 
audio fi le" is displayed and the music is not played back 
automatically. •
•
•
Video Mode
... ...video 5video 4video 2video 1video 3VIDEO_01.avi
VIDEO_02.divx
VIDEO_03.divx
VIDEO_04.avi
VIDEO_05.divx
VIDEO_06.divx
VIDEO_07.avi3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
Example
■ Buttons for fi le selecting operations
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERWhen selecting a folder icon: Enter this
directory.
When selecting a video fi le: Play the
video.
RETURNReturn to the previous process.
A (red)Select/deselect items (checkmarks are 
addded to the selected items).
D (yellow)Display the USB MENU screen.
"Video mode" is only available for USB mode.
When there are invalid video fi les, the X mark will be 
displayed for the fi le.
■ Buttons for playing mode
Buttons Description
a
Go to the beginning of a fi le by pressing a
 
once and the previous fi le by pressing a
 
twice.
bGo to the next fi le.
c
/d
Reverse/fast forward a video.
RETURNGo back to the fi le selection screen.
A (red)Start playback from the previously stopped 
scene.
B (green)Stop a video.
C (blue)Reveal/hide the Guide Display. •
•
-$@-&6/@&@JOEE





 
						

							 43
■ Using the control panel
You can use the control panel for video playback 
operations.
You can call up this operation panel by pressing 
MENU after you press 
a
/
b to select "Control (USB)" 
from "System Options" > "View Option".
PLAY Tool0:04:11 / 0:07:42
Resume
jump
Reverse/fast forward continues from one fi le to another 
during continuous playback.
USB Menu
Set All Auto Play
Reset All Auto PlayUSB MENU
Example
Set/Reset All Auto Play
Set or reset the video to be played back.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select "Set All Auto Play"/"Reset All 
Auto Play", and then press ENTER.
•  When you select "Set All Auto Play", checkmarks are 
added to all the video fi les.
•  When you select "Reset All Auto Play", remove all the 
checkmarks from all the video fi les.
3   Press C to play back the video.
If no video fi les have been selected, "Cannot playback the 
video fi le" is displayed and the video is not played back 
automatically.
DivX® setup
This is the function to confi rm your registration code. 
You need to register the code at http://www.divx.com.
1 Press MENU to display the menu screen.
2 Press c
/d
 to select "Initial Setup", and then press 
ENTER.
3 Press a
/
b to select "DivX® Setup", and then 
press ENTER.
■ DivX
® VOD registration
You can fi nd your registration code on this menu. You
need to register the TV at http://www.divx.com before 
playing the DivX content.
■ DivX
® VOD deregistration
You can fi nd your deregistration code on this menu. 
You need to deregister the TV at http://www.divx.com 
to release the registration.
•
•
USB Memory Device Compatibility
USB memory 
deviceUSB Memory, USB card reader (Mass 
Storage class)
File system FAT/FAT32
Photo fi le 
formatJPEG (.jpg) (DCF2.0 compliant)
Music fi le 
formatMP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video fi le format
File
extensionContainer Video Audio
*.avi AVI
DivX 3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
Motion JpegMP3
AC3
LPCM
ADPCM
*.mkv MKV
DivX 3.11/4.x/5.1/6.0
XviD
H.264
MPEG4MP3
AC3
LPCM
ADPCM
*.asf ASF
DivX 3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
VC-1MP3
AC3
LPCM
ADPCM
*.wmv ASF VC-1 WMA
*.mp4
*.movMP4
(SMP4)H.264
MPEG4
XviDMP3
AAC
*.mpg
*.mpegPSMPEG2
MPEG1AC3
MPEG Audio
LPCM
Progressive format jpeg fi les are not supported.
Music fi les in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.
Some video fi le formats may not be played depending on 
the fi le. •
•
•
•
Enjoying Photo/Music/Video Playback
-$@-&6/@&@JOEE





 
						

							 44
Presetting Remote Control Function
You can operate the connected AV products (AV 
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, 
LD) using the presetting manufacturer function of your 
remote control unit.
14
12
11
6
13
10
8
9
7
54 32
1
Presetting manufacturer codes
1   Press an appropriate button (STB, DVD•VCR or 
AUDIO) to operate the connected equipment.
2   Press an appropriate button (STB, DVD•VCR or 
AUDIO) and DISPLAY at the same time to enter 
the code registration mode.
3   Press 0–9 to enter the manufacturer code. (See 
page 42.)
•  Preset mode is fi nished once the LED no longer lights 
up.
4   After registering the code, the LED will stop blinking 
then turn off after one second. (If you perform an 
incorrect operation, the LED will blink quickly then 
turn off.)
Operating the Connected Equipment
To operate the connected equipment, press STB, 
DVD∙VCR or AUDIO to select your device. (STB (cable 
converter), DVD, BD, VCR or AUDIO.) The remote 
control unit button will function as follows.
•  When you operate VCR, DVD or BD, press INPUT to select 
the terminal connected to your device. 
•  CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)
  • Turns the connected equipment power on and off.
2 ,
• Starts playback. (VCR, DVD, BD)
3 *
• Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (DVD, BD)
4 +
• Stops the tape transport. (VCR)
• Playback stops when pressed. With some DVD/Blu-ray 
disc players, pressing the button twice may open the disc 
tray. (DVD, BD)
5 .
• Pressing quickly once takes you to the start of the chapter 
currently playing. Each time you press it, you move back 
to the start of the previous chapter. (DVD, BD)
6 0–9, • (DOT) (STB)
• Press a button (or buttons) that corresponds to the 
channel that you wish to watch.
7 -
• Rapidly advances the tape and allows picture search. 
(VCR)
• Hold down to fast forward. (DVD, BD)
8 )
• Sets pauses and still pictures. (VCR, DVD, BD)
9 /
• Pressing quickly once takes you to the start of the next 
chapter. Each time you press it, you move ahead to the 
start of the next chapter. (DVD, BD)
10 (REC
• Starts recording. (VCR)
11 FLASHBACK
• Press to switch between the current channel and the 
channel you were watching immediately before. Some 
manufacturers do not preset FLASHBACK. (STB)
12 CH
U/
V
• Press CHU or CHV to tune in to a higher or lower 
channel. (STB)
• Press to select the channel of the TV tuner on the VCR. 
(VCR)
13 MENU
• When this button is pressed, the DVD/BD menu will 
display. (DVD, BD)
14 a/
b/
c/
d, ENTER
• 
a/
b/
c/
d: Press the button to select items on the STB 
GUIDE screen or STB MENU screen. (STB)
  Press the button to select items on the DVD/BD menu 
screen. (DVD, BD)
• ENTER: Press to activate the selected function. (STB, 
DVD, BD)
Other Viewing Options
-$@-&6/@&JOEC





 
						

							 45
Manufacturer codes Other Viewing Options
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY  WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA09
13
04
12
04
09
10, 13, 14
04
04
04
09, 16, 17, 22
09
04, 05, 06
12
04
02
09
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
09
10
09
REMOTE CONTROL CODE 
NUMBER VCR BRAND
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH24
31
36
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
REMOTE CONTROL CODE 
NUMBER DVD/BD/LD BRAND
•  Depending on the brand, the codes of some BD players 
may not be supported.
ANVISION
CABLE STAR
EAGLE 
G.INSTRUMENT
GERROLD
JERROLD
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH04, 05
04, 05
05
02, 03, 10, 11, 17, 20
17
02, 03, 10, 11, 12, 20, 
25-34
04, 05, 08, 12, 15, 16, 
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
07 
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
06, 35
REMOTE CONTROL CODE 
NUMBER STB BRAND
•  Numbers marked with * are SAT codes, all others are STB 
codes.
SHARP
SHARP (SOUND BAR)01
02
AUDIO BRANDREMOTE CONTROL CODE 
NUMBER
-$@-&6/@&JOEC





 
						

							 46
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
•  Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate 
compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD).
•  By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to the TV, you can control a 
recorder or AV amplifi er using the remote control of the TV.
•  AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Back panel vertical inputs
Example
AQUOS LINK-compatible 
Audio system 
AQUOS BD Player
HDMI-certified cable 
* Use HDMI 1 to connect 
   ARC-compatible equipment.
HDMI-certified cable  Optical fiber cable*Connecting AQUOS 
BD Player via AQUOS 
LINK-compatible 
Audio system 
For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
Point the remote control toward the TV, not to connected HDMI equipment.
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certifi ed cable.
Up to 3 pieces of HDMI recording equipment and one AV amplifi er can be connected using this system.
These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on 
the equipment and select the appropriate input source using INPUT. •
•
•
•
•
Connected AQUOS LINK-compatible devices can be operated without 
changing the settings of the remote control unit. 
OPTION button will function only when AQUOS LINK is used.
■ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the 
image from the HDMI source.
■
 One Touch Recording
Press 
(REC while you are viewing a broadcast received with the AQUOS 
LINK-compatible recorder. The AQUOS LINK automatically recognizes the 
connected HDMI device and starts recording.
■
 Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and 
you can control the TV and the devices as if using a universal remote control.
■
 Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
The above description is an example of the AQUOS LINK function.
The steps in “AQUOS LINK Setup” on page 44 need to be completed beforehand.
Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV. •
•
•
-$@-&6/@&JOEC





 
						

							 47
AQUOS LINK Setup
Menu
System Options
AQUOS LINK Setup
System
Options
AQUOS LINK Control[On]
Auto Power On[Yes]
[Auto]
Selecting Recorder
Channel Select Key
Audio Return Channel
Example
     
1   Press MENU to display the MENU screen, and then 
press 
c/
d to select "System Options".
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
3   Press 
a/
b to select a specifi c item, and then press 
ENTER.
4   Press 
a/
b (or 
c/
d ) to select the desired setting, 
and then press ENTER.
5   Press MENU to exit.
AQUOS LINK Control
Select AQUOS LINK Control to disable AQUOS LINK 
function even when an AQUOS LINK-compatible HDMI 
device is connected to the TV. This function prevents 
the device from starting to operate unexpectedly.
Enable:  You can operate AQUOS LINK-compatible 
equipment.
Disable: AQUOS LINK function does not work.
Auto Power On
If this is activated, the One Touch Play function is 
enabled.
Yes: While the TV is in standby mode, it automatically 
turns on and plays back the image from the HDMI 
source.
No: This function does not work.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are 
connected, this function allows you to set the recorder 
for recording when you press 
(REC on the TV’s 
remote control unit.
Press 
a/
b to select the recorder for recording.
When an AQUOS LINK-compatible audio system or other 
equipment is connected between the TV and recorder, 
“Sub” is displayed. •
Using AQUOS LINK
Channel Select Key
This function can be set for each input terminal.
On: The remote control unit of the TV can be used to 
select the channel, display program information, and 
perform other operations of a connected AQUOS 
LINK-compatible recorder.
Off: This function does not work.
Audio Return Channel
This function allows you to listen to the TV audio via 
audio equipment without using an optical fi ber cable, 
which conventionally is required.
Requirements for using an ARC-compatible AV 
amplifi er:
ARC-compatible AV amplifi er connected to the ARC-
compatible HDMI terminal (HDMI 1).
(Refer to the operation manual of the ARC-compatible 
equipment for details.)
Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-
compatible audio equipment.
Off: This function does not work.
If the TV audio cannot be output from the AV amplifi er even 
after making the necessary settings, connect the TV to the 
AV amplifi er with an optical fi ber cable and select “Off”. •
•
•
-$@-&6/@&JOEC





 
						

							 48
Link Operation Menu
Recorder Power On/Off
Device Operation panel
[By AQUOS SP]
Play from Rec. List
Show Start Menu
Change Media of Device
Link Booking (Rec. Book)
Change Audio Output Device
Change Surround Mode
Choosing Operating Device
AQUOS LINK Setup Link Operation
MenuLink
Operation
     
Turning On/Off AQUOS LINK-compatible 
Equipment
You can manually turn on/off the power of connected 
AQUOS LINK-compatible equipment.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Recorder Power On/Off”, and 
then press ENTER.
3   Select “On” (or “Off”) and press ENTER to turn on 
(or off) the equipment.
Using AQUOS LINK
One Touch Recording
This function allows easy one-touch recording of the 
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by 
simply pressing 
(REC on the remote control.
Prepare the connected AQUOS LINK-compatible 
recorder for recording. Check the following items.
Make sure that the antenna cable is connected.
Check that there is suffi cient available space on the 
recording media (HDD, DVD, etc.).
On the TV, use “AQUOS LINK Setup” and “Selecting 
Recorder” to select the equipment for recording.
By default, the recorder connected to HDMI 1 is selected 
for recording.
1   Press (REC to start recording.
When you are viewing a broadcast received with 
the AQUOS LINK-compatible recorder selected in 
"Selecting Recorder", recording to the AQUOS recorder 
of the broadcast being viewed starts.
When you are viewing a broadcast received with 
equipment other than the AQUOS LINK-compatible 
recorder selected in "Selecting Recorder" or other 
external input equipment, pressing 
(REC on the 
remote control does not start recording.
2   Press + to stop recording.
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Press 
d to start playing back a title.
The last played program is played back. You can use the 
following buttons during broadcast viewing.
Buttons Description
POWER
(SOURCE)Turns the power of the HDMI connected devices 
on and off.
*Hold down to go in reverse.
,Starts playback.
-Hold down to fast forward.
+Playback stops.
)Sets pauses and still pictures.
7Pressing quickly once takes you to the start of the 
chapter currently playing. Each time you press it, 
you move back to the start of the previous chapter.
8Pressing quickly once takes you to the start of the 
next chapter. Each time you press it, you move 
ahead to the start of the next chapter.
The buttons 7/8 do not function with the following 
Blu-ray disc players currently available.
- BD-HP20U, BD-HP50U •
•
•
•
•
•
•
•
-$@-&6/@&@JOEE