Sharp Lc 46hd1e Operation Manual

							
Wide modes
You can select the picture size. Selectable picture size 
varies with the type of signal received.
Basically, if you set Auto format to “on” in the Setup 
menu, the optimum Wide mode is automatically 
chosen for every broadcast. You can however, change 
the screen format manually as explained below.
NOTE
•  Aside from manually changing the Wide modes as explained herein, the TV may detect and select the 
optimum Wide mode according to the signal received.
Press  f.•  The Wide modes menu displays.
•  The menu lists the wide mode options selectable for 
the type of video signal currently received.
Press  f or  a/b  while the Wide modes menu 
displays on the screen.
•  As you toggle the options, each is immediately 
reflected on the screen. There is no need to press 
OK .
1
2
Menu operation
Teletext
What is Teletext?
Teletext broadcasts pages of information and 
entertainment to specially equipped television sets. 
Your TV receives Teletext signals broadcast by a TV 
network, and decodes them into graphical format for 
viewing. News, weather and sports information, stock 
exchange prices and programme previews are among 
the many services available.
Turning on and off Teletext
Select a TV channel or external source 
providing the Teletext programme.
Press  m to display the Teletext on the right 
screen and the normal image on the left screen.
•  Many stations use the TOP operating system, while 
some use FLOF (e.g. CNN). Your TV supports both 
these systems. The pages are divided into topic 
groups and topics. After switching on the teletext, up 
to 2000 pages are stored for fast access.
•  From the dual screen, press  m to return to the 
normal screen.
•  From the dual screen, press  PIP to display teletext in 
the entire screen. Once this is done, you can go back 
to the normal screen by pressing  m as shown.
•  If you select a programme with no Teletext signal,  “No text” displays.
•  The same message displays during other modes if no  Teletext signal is available.
1
2
NOTE
•  Teletext will not work if the selected signal type is RGB. (“TV menu > Connections > Miscellaneous > Manual 
adjustment of AV standard”)
*  Switching back is available once full screen teletext is  displayed.
NOTE
•  Some items do not appear depending on the type of received signal.
Item (for SD (Standard) signal)
Full : For 16:9 squeeze pictures.
Normal : For 4:3 “standard” pictures. A side bar appears 
on each side.
Panorama : In this mode the picture is progressively 
stretched toward each side of the screen.
Cinema16:9 : For 16:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Cinema14:9 : For 14:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Item (for HD (High-Definition) signal)
Full : Display with the Overscan image. Crop all sides of 
screen.
Underscan : Display with the Underscan image. 
(Display with the High-Definition image compressed 
optimally. Noise may appear on the edge of the screen 
with some programmes.)
Item (for PC signal)
Full : An image fully fills the screen. 
Normal : Keeps the original aspect ratio in a full screen 
display.
Cinema : For 16:9 letterbox pictures. Bars may appear on 
the top and bottom with some programmes.
dot by dot : Detects the resolution of the signal and 
displays an image with the same number of pixels on 
the screen.
 39
TELETEXT
TELETEXT
m
* m
PIP
L C -5 2H D1E -g b.i n dd   3 9LC-52HD1E-gb.indd   392008/0 3/2 4   1 5:0 1:2 82008/03/24   15:01:28
 
						

							
Menu operation
Using teletext menu
  While in the teletext mode, press MENU to 
display the Teletext menu.
Newsflash Reveal Recording wizard Setup
Teletext menu
Items
Newsflash
Reveal/Conceal
Recording wizard
Setup Preview pages
Sub-title pages
Character set
HiText
Buttons for teletext operation
Buttons Description
Colour 
(Red/
Green/
Yellow/
Blue) Select a group or block of pages displayed in the 
coloured brackets at the bottom of the screen by 
pressing the corresponding 
Colour (Red/Green/
Yellow/Blue)  on the remote control unit.
0 - 9  Directly select any page from 100 to 899 by using 
0 - 9
.
v  (Top/
Bottom/
Full) Switch the Teletext image to Top, Bottom or Full.
k  (Reveal 
hidden 
Teletext) Reveal or conceal hidden information such as an 
answer to a quiz.
3  
(Freeze/
Hold) Stop updating Teletext pages automatically or 
release the hold mode.
[  
(Subtitle 
for 
Teletext) Display the subtitle or exit the subtitle screen.
•  Subtitle will not be displayed when the service 
does not contain the subtitle information.
1  
(Subpage) Reveal or hide subpages.
• 
c/d  button: Select subpage.
•  RED  button: Move to the previous page.
•  GREEN  button: Move to the following page.
•  These two buttons are shown on the screen by  the signs  l and  k.
 40
LC -5 2H D1E -g b.i n dd   4 0LC-52HD1E-gb.indd   402008/0 3/2 4   1 5:0 1:2 92008/03/24   15:01:29
 
						

							
Important information
Hard disk (HDD)
This TV set records programmes onto a hard disk 
drive (HDD). The hard disk is equipped with a safety 
mechanism to protect data from impact, vibration and 
dust. However, to prevent loss of recorded data, you 
should be particularly careful of the following points:
•  Do not subject the TV set to any impact.
•  Do not use in a location which is unstable or subject to vibration.
•  Do not move the TV set while the power is on.
•  Do not unplug the power cord from the AC outlet during  recording or playback. First turn power “OFF” (the 
STANDBY indicator glows red), and then unplug the power 
cord from the AC outlet.
•  Do not use in a location with abrupt temperature variation  (variation of more than 10°C per hour).
•  The TV set will malfunction if used in a cold location (5°C or  less) or an extremely hot location (35°C or higher).
•  If you carry the TV set from a cold location to a warm  location, let the TV set sit for a while before using it.
•  In the unlikely event that the hard disk (HDD) malfunctions  for some reason, you cannot replace it by yourself. If you 
disassemble the TV set you will void the warranty. Please 
contact the nearest service centre approved by SHARP. 
We cannot provide compensation for data content if data is 
lost or not recorded.
This TV set has a built-in hard disk drive 
(abbreviated as “HDD”) for recording and playback. 
Beware of the following points when setting up 
and using the TV set. Failure to observe these 
precautions may cause damage to the HDD itself 
or its content, failure of the disk to operate, or 
recording of noise.
•  Do not subject the TV set to any vibration or impact.
•  Do not place the TV set in a cramped location which might block the cooling fan or ventilation port on the back of the 
TV set.
•  Do not place the TV set in a location with severe  temperature variation.
  If the TV set is set up in a location with severe temperature  variation, dew may form on and inside the TV set. If the 
TV set is used with internal dew formation present, this 
may cause HDD damage or malfunction. We recommend 
keeping variation in room temperature within 10˚C per hour.
•  Do not place the TV set in a location with high humidity.
•  Place the TV set horizontally, never at an incline.
•  When the power is on, do not unplug the power cord from  the AC outlet, do not turn off the breaker for the area where 
the TV set is set up, and do not move the TV set.
  When moving the TV set, first turn off the power (the  STANDBY indicator glows red) and then unplug the power 
cord from the AC outlet.
Unrecordable material
•  The only signals that can be recorded are those from the internal analog & digital tuners and external CVBS & Y/C 
signals.
•  When recording a signal other than the signal being  watched, some signals cannot be recorded depending on 
the signal being viewed. 
•  This TV set is equipped with a copy guard function that  prevents the recording of broadcast programmes that 
contain a signal that restricts copying in accordance with 
copyrights and so forth.
•  If a copy guard signal is contained in a source video that  occurs partway through recording, recording is paused at 
that point. Recording resumes when the copy guard signal 
is no longer present, while no recordings will be made for 
the part where the copy prevention signal is present.
In the unlikely event that there is a problem such 
as the loss of recorded video or audio content 
due to an HDD malfunction, please be aware 
beforehand that SHARP will bear no responsibility 
to compensate for the content which could not 
be recorded or edited, for the loss of recorded or 
edited video, or for other related direct or indirect 
damages.
If a power failure occurs
•  The content being recorded or timer recorded may be damaged if a power failure occurs.
•  The content being played back may be damaged.
For important recording
•  If the HDD malfunctions, the content recorded on the HDD  may be lost. If you wish to save content permanently, we 
recommend copying or moving the content to DVD-RW or 
DVD-R.
NOTE
•  If a message indicating an HDD error is displayed and  the HDD has malfunctioned, you cannot replace the HDD 
by yourself. If you disassemble the TV set, the warranty 
will become void. Also, recovery of data is impossible. If 
playback is possible, re-record the recorded content onto 
a DVD-RW/R disc, and contact your nearest service centre 
approved by SHARP.
Copyright
•  Recording and playback of any material may require consent. Please refer particularly to the provisions of the 
copyright Act 1956, the Dramatic and Musical Performers 
Protection Act 1958, the Performers Protection Acts 1963 
and 1972 and to any subsequent statutory enactments 
and orders.
•  This product incorporates copyright protection technology  that is protected by U.S. patents and other intellectual 
property rights. Use of this copyright protection technology 
must be authorised by Macrovision, and is intended for 
home and other limited viewing uses only unless otherwise 
authorized by Macrovision. Reverse engineering or 
disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 
4,819,098; 4,907,093; 5,315,448; and 6,516,312 
licensed for limited viewing uses only.
HDD Digital Recorder operation
 41
LC -5 2H D1E -g b.i n dd   4 1LC-52HD1E-gb.indd   412008/0 3/2 4   1 5:0 1:3 02008/03/24   15:01:30
 
						

							
Features
About the Digital Recorder system
Your SHARP TV set is equipped with a Digital Recorder 
that includes a hard disk. You can use this to record 
and playback picture and sound from TV programmes, 
like with a VCR or DVD recorder. HDTV programmes 
can also be recorded and played back. However, 
the possibilities of the Digital Recorder are far more 
versatile than those of a VCR or DVD recorder:
✔  Time shift viewing
When you’re watching TV, the phone rings … 
Don’t worry. You can pause a TV programme and 
continue playing it later.
✔ Chasing playback
You return home early when a timer-recorded football 
game is already in progress …
Don’t wait. You can simply rewind to the beginning of 
the game while still recording.
✔ Simultaneous recording/playback
You don’t have to sit and wait until the recording ends. 
You can play DVDs or programmes already recorded in 
the HDD while recording.
✔ Instant replay
You jump back 40 seconds at the press of a button to 
watch the scene again. The live picture is shown at the 
same time in the PIP window.
✔  Archiving the time-shifted recording
You can also decide to copy the whole TV programme 
into the Digital Recorder’s archive at the end of a TV 
programme you have been watching with a time shift.
✔  Fast navigation by jumping
Jump backwards and forwards in the programme at 
the press of a button.
The jump distance is adjustable.
In addition, the special function “Smart jump” ensures 
that for each change in jump direction the jump 
distance is cut in half. This way you can feel your way 
quickly to a certain spot in the time shift playback.
✔  Fast forward and rewind
You can fast forward and rewind at three different 
speeds in the programme you are viewing. (Rewind is 
not possible with HDTV.)
✔ Slow motion
You can watch the programme you are viewing at four 
different slow motion speeds.
✔ Setting bookmarks
During a football match, for example, you can flag 
goals or exciting scenes. (For this, the time-shift 
recording is converted into an archive recording.) For 
later playback, you can play bookmarks as highlights.
✔  Recording straight into the archive
The archive holds between 20 and 100 hours of 
programmes, depending on the recording quality set.
✔  Timer recording using EPG or teletext
Comfortably select your favourite programme for 
recording, from the EPG or teletext. The Digital 
Recorder records up to 50 timer recordings - even in 
your absence.
✔ Serial recording
You can conveniently programme serials which run 
daily, weekly or from Monday to Friday.
✔ Delete Manager
An automatic delete manager always ensures there is 
sufficient recording space for new programmes.
✔  Editing archived titles
You can sort, edit/rename, lock or delete the titles in 
the DR archive. You can also delete or hide sections of 
the selected programme.
✔  Copying your recordings to a video/DVD 
recorder
Recordings which you wish to watch repeatedly 
on a long-term basis should be burnt to a DVD or 
transferred to a video recorder. The programme can 
then be deleted from the archive. For data transmission 
to external equipment, you can do this by using the 
“Copy” command.
Limitation during PIP operation
If on the main screen you see the live picture and 
you open the PIP picture, generally the background 
recording for time-shift TV is ended and deleted.
With archive recording and time-shift TV, there may 
be limitations on the stations which you can select 
for the PIP picture.
HDD Digital Recorder operation
 42
L C -5 2H D1E -g b.i n dd   4 2LC-52HD1E-gb.indd   422008/0 3/2 4   1 5:0 1:3 02008/03/24   15:01:30
 
						

							
About time shift viewing and archive recording/playback
HDD Digital Recorder operation
 43
Always 
recording...
Storing time shift 
recording into an 
archive:
You can convert the programme 
you are currently recording with 
a time shift into an archive. (Page 
46)
Archive recording
You can choose to store the 
programmes directly into the 
DR archive.
In archive recording mode, 
you can also:
✔  Directly record a 
programme into an 
archive while doing 
other things.
✔  Programme timer 
recordings using EPG or teletext.
✔   Delete, edit, rename or lock the already-
archived titles.
Time shift recording
The TV automatically records 
the programme you are 
watching if the function is 
enabled.
Playback:
You can playback the programme 
in various ways, be it the current 
programme with the time shift or 
already recorded title from the DR 
archive. (Page 48)
Bookmarking:
You can flag your favourite scenes 
or goals in football matches in 
order to watch them again later. 
(Page 51)
HDD
Your Hard Disk can perform ...
LC -5 2H D1E -g b.i n dd   4 3LC-52HD1E-gb.indd   432008/0 3/2 4   1 5:0 1:3 02008/03/24   15:01:30
 
						

							
Navigating the Digital recorder 
menu
You can use the Digital Recorder with the default 
values set at the factory.
This section explains how to customise these values 
to meet your own preference. To change the settings, 
first call the Digital Recorder menu screen as explained 
below.Press  RED to display the DR archive menu.
SHARP Demo
DR archive free capacity 48:42 hrs
While in the DR archive menu screen, press 
MENU
 to display the Digital Recorder menu 
screen.
DR continuous operation onoff
Digital Recorder menu
 
Recording quality high
Inform about hidden sections yes
Jump distance 02
Smart jump yes
Serial recording tolerance +-30
Record subtitles Yes, DVB subtitles preferred
Press  a/b  to select the desired item.
Press  c/d  to select the desired parameter or 
enter value with  0 - 9.
Items Description Defaults
DR continuous 
operation If DR continuous operation 
is switched on, recording is 
continuous to permit time-shift 
viewing.
on
Recording quality Adjust the recording quality 
for recording analogue 
programmes. This results in 
a change in the recording 
capacity. high
Inform about hidden 
sections If a section has been hidden in 
an existing archive recording 
you can choose whether to be 
advised of this by a message 
or not.
yes
Jump distance For time-shift viewing and for 
playing archive recordings 
you can set a jump distance 
(in minutes), so that you can 
jump forwards or backwards 
in the programmes by 
pushing the buttons 
G or 
J  briefly. Enter the time 
with the numeric buttons on 
the remote control (always 
enter two digits for 01 to 15 
minutes). yes, 02 min
1
2
3
4
HDD Digital Recorder operation
Items Description Defaults
Smart jump By using the Smart jump 
function, you can quickly and 
easily find a certain point in 
the recording (a time shift or 
in the archive). Every time the 
direction is reversed when 
jumping using the buttons 
G
 or J , the jump 
distance is cut in half. Refer 
to the next page for more 
information on this application. yes
Serial recording 
tolerance To avoid recording a serial 
episode more than once when 
it is shown several times a 
day, a tolerance time must be 
entered.
The serial is then only 
recorded when it starts 
within the start time ± serial 
recording tolerance. Enter the 
time with 
0 - 9 on the remote 
control (always enter two 
digits for 01 to 60 minutes).  ± 30 min
Record subtitles If DVB or teletext subtitles 
are to be recorded with DVB 
programmes, select the 
priority for subtitles to be 
recorded here. no
Setting pre-record time and post record time
You can set a pre-record and post record time for timer 
recordings made without VPS. This reduces the risk of 
parts of the programme not being recorded because it 
starts earlier and/or finishes later.
NOTE
•  Note that this operation is performed via the TV menu, not 
via the Digital Recorder menu.
In the TV mode, press  MENU to display the TV 
menu.
Select “Recording” with  c/d  and press  b to 
move down.
Recording
TV menu
Recording wizard
Timer list
Pre-record time
Post-record time 00 min
05 minSetup Εxtended functionConnections
Select “Pre-record time” or “Post-record time” 
with 
a/b .
Enter the time with  0 - 9 on the remote control 
(always enter two digits for 01 to 15 minutes 
for the pre-record time, and for the Post-record 
time 00 to 60 minutes).
1
2
3
4
 44
L C -5 2H D1E -g b.i n dd   4 4LC-52HD1E-gb.indd   442008/0 3/2 4   1 5:0 1:3 22008/03/24   15:01:32
 
						

							
HDD Digital Recorder operation
Recording with the HDD
Time shift recording and archive recording
There are 2 ways of recording a TV programme with 
the HDD. One is Time shift recording and the other is 
Archive recording.
E Time shift recording
The TV automatically records the programme currently 
tuned in. Pause, rewind, and chasing playback is 
available with the live programmes just like recorded 
programmes. Every time you change the channel, the 
old recording data of the previous channel is discarded 
and the new recording starts.
•  While this is working, the indicator lights green.
•  If you choose not to use this feature, set “DR continuous operation” to “off”.
•  The maximum time shift duration is approximately 3 hours,  depending on the conditions.
E Archive  recording
You can record programmes onto the DR archive’s 
hard disk drive.
About Delete Manager
The Delete Manager always makes sure there is 
enough memory space on the hard disk for new 
recordings. When the capacity of the hard disk is 
almost exhausted, the old recordings are deleted.
Recordings which you have marked with delete 
protection are not deleted by the Delete Manager. 
You can delete these recordings manually.
For settings and cancelling delete protection, see 
page 50.
To avoid loss of data, we recommend you copy 
important recordings onto video tape or a writable 
DVD, and delete the recordings from the Digital 
Recorder after copying to save space.
SHARP is not liable for data loss on the Digital 
Recorder’s hard disk.
Buttons for HDD operation
1  G   Rewind
2  E  Record
3  I  Play
4  H  Stop
5  J   Fast forward
6  F  Pause
7  Buttons inside the flip cover
  The buttons inside the flip cover are for AQUOS  LINK operation and should not be confused 
with HDD operation. (See page 19 for AQUOS 
LINK operation.)
 45
LC -5 2H D1E -g b.i n dd   4 5LC-52HD1E-gb.indd   452008/0 3/2 4   1 5:0 1:3 42008/03/24   15:01:34
 
						

							
Recording
Press E.•  If time shift is enabled this operation initiates the 
conversion of time shifted recording into the archive.
 
current programme 30 60 90 120 180
Recording duration (min.)
Select “current programme” (only if EPG or 
teletext data is available) or select one of the 
given minutes, or select “???” and enter the 
recording duration with 
0 - 9 on the remote 
control and confirm with  OK.
•  The Timer list screen displays.
•  If the beginning of the programme was recorded, 
it is transferred from the beginning, otherwise it will 
transfer from the point in time you switched over to 
its station.
•  You can also transfer a programme which has  already finished to the archive. Just rewind to the 
programme you want to archive and start archiving 
as “current programme”.
E Configuring the options in the “Timer list” menu screen
Whenever you choose to store the programme into the 
archive, the Timer list menu screen appears.
Timer list ->09:45 Bon(n) jour Berlin
Recorder DR       DVD-REC
Station 45 Phoenix
Date 14.09.2006
Recording time 09:45 until 10:00
VPS no
Recording type once only
•  If the DVB subtitles are switched on continuously (see  page 44, “Record subtitles”), you see the item 
“Subtitles (yes/no)” instead of the “VPS” menu item. 
Here, you can switch the DVB subtitles off for the 
current recording.
•  When you are doing the timer recording, the selection  under “Recording type” becomes available.
• Press  GREEN to lock the programme with the 
parental lock.
• Press  YELLOW  to protect the programme from 
automatic deleting.
•  (Time shift only):  If you want to record a 
programme without DVB subtitles (“subtitles” - “no”), 
the time-shifted recording that has been running until 
now is stopped and deleted. The archive recording 
starts after you have confirmed the timer list with  OK.
•  (Time shift only):  Programmes with copy protection 
(e.g. Macrovision) cannot be watched with time shift 
for legal reasons.
  Check the other timer list, change them if  necessary and then confirm with  OK to start 
recording.
•  The indicator turns from green to red.
1
HDD Digital Recorder operation
HINT
•  You can switch over to a different station or play the 
already-recorded titles stored in the DR archive during 
an archive recording. The recording continues in the 
background.
•  To switch back to the station you are currently recording,  press  I.
•  You can also switch off the TV set into standby mode (NOT  WITH THE MAIN POWER SWITCH  a). The recording 
continues while in standby.
E Status display when recording
Example: time shift
09:45 10:00
45 Phoenix
09:45 - 10:00 Bon(n) jour Berlin09:49
Wake up Mon-Fri Time shift 2:00 min 
9:51
9:50
Example: live picture during an archive recording
09:45 10:00REC
45 Phoenix
09:45 - 10:00 Bon(n) jour Berlin09:51
Live picture
9:51
Example: time shift during an archive recording
09:45 10:00
45 Phoenix
09:45 - 10:00 Bon(n) jour Berlin09:49
Time shift 2:00 min 
9:51REC
E Stop recording early
 Press 
H, and then press  OK to terminate the 
active recording.
•  You can also end a running recording by deleting the 
entry in the timer list or in the DR archive.
E Recording with subtitles
To record subtitles, the record subtitle function must be 
active in the Digital Recorder menu. (Page 44)
If one of the subtitle types is broadcast, the subtitles 
will be recorded. If both subtitle types are broadcast, 
those subtitles are recorded which you have flagged as 
“preferred”.
Call the DVB subtitles with the  m button during 
playback. Call teletext subtitles with the  GREEN and 
select whether these are to be displayed in normal size 
or double size.
 46
L C -5 2H D1E -g b.i n dd   4 6LC-52HD1E-gb.indd   462008/0 3/2 4   1 5:0 1:3 42008/03/24   15:01:34
 
						

							
Timer recording
You can programme the timer using the EPG, teletext or 
manually. You can programme up to 50 timer recordings. 
If you have programmed timer recordings, the TV set 
may only be switched off into the stand-by mode.
NOTE 
•  Do not switch the TV set off with the main power switch (a ) and do not pull the AC plug from the power outlet. If 
you do, then the timer recording will not take place.
Timer list screen
In the TV mode, press  MENU to display the TV 
menu.
Select “Recording” with  c/d  and press  b to 
move down.
Select “Timer list” with  a/b , and then press  OK.
Timer list Fri 29.09./08:28
Fr 29.09. 21:45-23:00 3sat AVO-Session Basel
----
•  You can check the list of preset recordings in the 
Timer list screen. From here you can change/delete 
preset recordings or start a new recording.
DR archive screen
 Press  RED.
•  You can check the completed timer recordings in the 
DR archive screen.
•  On the upper-left corner you see a remaining  capacity of HDD drive in hours. Considerable 
memory space is required on the hard disk for HDTV 
programmes.
E Timer recording via EPG
Press  EPG.
15:57-16:59 arte    Charmed - Zauberhafte Hexen
16:00-16:15 MDR FERN...   Hier ab vier
16:00-16:10  EinsExtra   EinsExtra Aktuell
16:00-17:15 SAT.1   Richter Hold
16:00-16:30 ProSieben   M. Asam - Mode
16:00-16:55  ZDFtheater...   Waschtag
16:05-17:00  Bayrische...   Wir in Bayern
16:05-16:45 KiKa   Skippy, der Buschpilot
16:05-17:00 KABEL1   Star Trek - Das nächste Jah... EPG (Electronic Programme Guide) Mon 31.07./16:05
Date
Time
Stations
Topics Mon 31.07
Now
all
all Tue 01.08
Wed 02.08 Thu 03.08 Fri 04.08
Select the desired programme.
Press 
RED (Record) to preset the programme. 
•  The Timer list screen displays. The rest is the same 
as explained on page 33.
•  When the presetting is complete, the programme is  marked with a red dot in the EPG.
You can also:
•  Select serial recording types under “Recording type”.  The timer then searches for serials in the station 
set every day. (See “Serial recording tolerance” for 
details.)
1
2
3
1
2
3
HDD Digital Recorder operation
E Timer recording via analogue teletext
Press  TEXT.
Press  E.
•  The first programme preview page is displayed. If not, 
define the preview page in the teletext menu under 
“Setup > Preview pages”.
Select the programme page containing the 
programme you want to record, and press 
GREEN .
Select the time when the programme begins 
with  a/b .
300 \
 303
Select programme Record
14.00    Tagesschau
14.10    In aller Freundschaft UT. . . . . . . . . . 316
            Zweite Begegnung (D, 2005)
15.00    Tagesschau 
15.10    Sturm der Liebe (221) . . . . . . . . . . .  317
16.00    Tagesschau UT
16.10    Eisbär, Affe & Co.  . . . . . . . . . . . . . . 318
17.00    Tagesschau um fünf UT
17.15     Brisant  . . . . . . . . . . . . . . . . . . . . . .319
17.47    Tagesschau
17.55    Verbotene Liebe  . . . . . . . . . . . . . . . 320
18.20    Marienhof  . . . . . . . . . . . . . . . . . . . . 321
18.50    Das Geheimnis meines  . . . . . . . . . . .322
            Vaters (19)
19.20    Das Quiz mit Jörg Pilawa . . . . . . . . . . 384
            bis 19.50 Uhr
  302   302    ARDtext          Do   05. 10. 06        09: 36 : 42
–            
+Jetzt im TV ARD morgen
Do   05. 10. 06      Das Erste
Press 
OK to register the timer recording.•  Timer list screen displays. The rest is the same as 
explained on page 33.
•  Check the recording time and date for programmes  which last past midnight or begin the following day. 
The data from the teletext may not be complete.
E Manual timer recording
In the TV mode, press  MENU to display the TV 
menu.
Select “Recording” with  c/d  and press  b to 
move down.
Select “Timer list” with  a/b , and then press 
OK .
Press  RED (New recording) to manually 
programme a new recording.
Select “Manual” with  c/d , and then press  OK.
Select the station to record with  a/b /c /d , 
and then press  OK.
•  The Timer list screen displays. The rest is the same 
as explained on page 34.
1
2
3
4
5
1
2
3
4
5
6
 47
LC -5 2H D1E -g b.i n dd   4 7LC-52HD1E-gb.indd   472008/0 3/2 4   1 5:0 1:3 72008/03/24   15:01:37
 
						

							
HDD Digital Recorder operation
E Deleting programmed timer entries
In the TV mode, press MENU to display the TV 
menu.
Select “Recording” with  c/d  and press  b to 
move down.
Select “Timer list” with  a/b , and then press 
OK .
Select the entry to delete with  a/b .
Press  YELLOW  (Delete), and confirm with  OK.
•  To abort the deletion, press  YELLOW again.
1
2
3
4
5
Playback
E Play
Press RED to display the DR Archive.
SHARP Demo
DR archive free capacity 48:42 hrs
•  You can switch between alphabetical and 
chronological sorting by pressing  BLUE.
•  The bar (on the right in the list) shows you how  much of the recording has been watched. The bar is 
empty for recordings which have not been watched; 
recordings which have been watched entirely have 
a bar filled completely; partially watched recordings 
have a bar which is filled for the parts already 
watched.
•  If other programme data is available from the EPG or  teletext, it is shown below the archive list for the entry 
just marked. Other information about the recording 
can be displayed by pressing  m, if available.
Select a recording with  a/b .
Press  OK to start playback.
E Pause
Freeze picture with  F.
To continue playback, press  I or press  F 
again.
1
2
3
1
2
While viewing with Time Shift:
You want to interrupt a programme to answer a phone 
call, for example.
 Press  F.
•  The TV picture freezes and the drive display appears.
•  At the top you will see the number and name of the 
station if EPG or teletext data is available, in addition 
to the start and end of the current programme and 
the title of the programme.
•  Before the bar you can see the start time for time  shift recording. After the bar you can see the time 
at which the offset recorder will be full (automatically 
extends by 30 minutes, up to approx. 3 hours). 
The grey bar indicates how much of the available 
recording time has been used up. The time displayed 
inside the bar is the time at which the  F button was 
pressed.
You want to carry on watching the programme at the 
end of the phone call.
 Press  F again or  I.
•  Now you will see the TV programme with a time shift 
from exactly the point in time you first pressed  F. 
The Play symbol ( I) appears in place of the Pause 
symbol ( F).
E Go live (Time shift only)
 Press  H.•  You will then see the live picture of the programme.
E Smart  jump
The Smart jump function is included to enable fast and 
easy access to a certain place within the programme. 
When Smart jump is switched on, the jump distance is 
cut in half after each change in the jump direction while 
jumping. By cutting the jump distance in half when 
changing the jump direction, you can estimate your 
way close to a particular section.
The playback symbol ( I) is yellow when the Smart 
jump function is active.
For instance, you are looking for the beginning of a 
programme …
Press  G several times to jump back (pre-set 
jump distance).
If you have jumped past the beginning of the 
programme, jump in the opposite direction. 
Briefly press  J.
This jump in the opposite direction is only 
carried out for half the jump distance. Now jump 
forward using  J until you see the beginning 
of the programme.
If you have jumped past the beginning of the 
programme, jump back using  G. In the 
process, the jump distance is cut in half again.
•  The pre-set jump distance is used again if you jump 
more than 3 times in the same direction or if the 
Digital Recorder display disappears.
1
2
3
4
 48
LC -5 2H D1E -g b.i n dd   4 8LC-52HD1E-gb.indd   482008/0 3/2 4   1 5:0 1:3 92008/03/24   15:01:39